• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.222-227
• /
• 2000

"Side scan sonar" using acoustic signal has been developed to survey cable laying, sunken bodie\ulcorner bottom and so on. It use the acoustic signals, which are emitted from two transducer arrays, to get gemetri\ulcorner target area. This system consists of transceiver board, towed body, and deck unit. The transceiver board, w\ulcorner watertight canister of the towed body, controls the transmitting and receiving of 400kHz acoustic signals from \ulcorner After receiving the scattered signals, it processes the filtering, AGF(Automatic Gain Control), TVG(Time Heterodyne. The deck unit is composed of the signal processing part, A/D converter, power supplier, and real\ulcorner And the towed body has been designed to satisfy the optimal hydrodynamic behavior during towing. The de\ulcorner theory of transceiving part and some results from field-experiments will be introduced here.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.376-381
• /
• 2014

We present a CMOS rail-to-rail class-AB amplifier using dynamic current biasing to improve the delay response of the error amplifier in a low-dropout (LDO) regulator, which is a building block for a wireless power transfer receiver. The response time of conventional error amplifiers deteriorates by slewing due to parasitic capacitance generated at the pass transistor of the LDO regulator. To enhance slewing, an error amplifier with dynamic current biasing was devised. The LDO regulator with the proposed error amplifier was fabricated in a $0.35-{\mu}m$ high-voltage BCDMOS process. We obtained an output voltage of 4 V with a range of input voltages between 4.7 V and 7 V and an output current of up to 212 mA. The settling time during line transient was measured as $9{\mu}s$ for an input variation of 4.7-6 V. In addition, an output capacitor of 100 pF was realized on chip integration.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.505-508
• /
• 2002

본 논문은 광섬유 증폭기에서 입력 펄스 열에 따른 gain recovery 특성을 고찰하였다. 1.3$\mu\textrm{m}$ 대역에서 증폭 특성을 갖는 PDFA(Praseodymium-Doped Fiber Amplifier)의 WDM 적용 시 short pulse 열을 인가할 경우 발생할 수 있는 이득 포화 및 복구의 시간적 한계를 이론적으로 해석하였다. 펄스열의 간격과 펌프 파워, 그리고 펄스 간격에 따른 이득 포화 및 복구 시간이 광 펄스의 증폭에 미치는 영향을 예측할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.533-534
• /
• 2002

본 논문에서는 1.47$\mu\textrm{m}$ 대역에서 증폭 특성을 갖는 TDFA(Thulium-Doped Fiber Amplifier)의 WDM 적용시 short pulse 열을 인가할 경우 발생할 수 있는 이득 포화 및 복구의 시간적 한계를 이론적으로 해석하였다. 펄스열의 간격과 펌프 파워, 그리고 펄스 간격에 따른 이득 포화 및 복구 시간이 광 펄스의 증폭에 미치는 영향을 예측할 수 있었다.

• 한국광학회지
• /
• 제16권5호
• /
• pp.411-416
• /
• 2005

Optical Time Domain Reflectometry를 이용하여 수백 km 이상의 장거리 광통신망을 감시하기 위해서는 감시광을 증폭시켜야한다. 본 논문에서는 1625 nm OTDR 감시광을 증폭시키기 위해 fiber Bragg grating과 band pass filter를 이용하여 이득과 잡음지수를 각각 5.1 dB 그리고 0.9 dB 향상시킨 2단 구조의 Extended L-band EDFA를 제안하였다. 제안된 Extended L-band EDFA의 1625 nm 대역의 신호 이득은 16.3 dB이고 잡음지수는 7.1 dB였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.31-38
• /
• 2016

A novel self-reference sense amplifier with parallel reading during writing operation is proposed. Read access time is improved compared to conventional self-reference scheme with fast operation speed by reducing operation steps to 1 for read operation cycle using parallel reading scheme, while large sense margin competitive to conventional destructive scheme is obtained by using self-reference scheme. The simulation was performed using standard $0.18{\mu}m$ CMOS process. The proposed self-reference sense amplifier improved not only the operation speed of less than 20 ns which is comparable to non-destructive sense amplifier, but also sense margin over 150 mV which is larger than conventional sensing schemes. The proposed scheme is expected to be very helpful for engineers for developing MRAM technology.

• Journal of Communications and Networks
• /
• 제1권2호
• /
• pp.81-85
• /
• 1999

The regrowth of OQPSK power spectral sidelobes from AM/AM and AM/PM amplifier nonlinearity is analyzed. The time-domain expression for amplifier output shows how spectral re-growth will depend on the cubic coefficient of the Taylor's series of the amplifier nonlinearity as well as input amplitude ripple. Closed form spectrum calculations show that the spectral sidelobes produced by AM/PM take the same form as those produced by AM/AM. The rate of growth of AM/PM sidelobes is, however, not as great as for AM/AM.

• 대한전자공학회논문지SD
• /
• 제39권4호
• /
• pp.1-9
• /
• 2002

DRAM에서 셀 파라메터들의 확률 분포를 고려하여 데이터 보유 시간에 대한 분포 특성을 계산하였다. 셀 파라메터와 셀 내부 전압의 과도 특성으로부터 데이터 보유 시간의 식을 유도하였다. 접합 공핍 영역에서 발생하는 누설 전류의 분포 특성은 재결합 트랩의 에너지 분포로, 셀 캐패시턴스 분포 특성은 유전체 성장에서 표면 반응 에너지의 분포 특성으로, 그리고 sense amplifer의 감도를 각각의 독립적인 확률 변수로 보고, monte carlo 시뮬레이션을 이용하여, 셀 파라메터 값들의 확률적 분포와, DRAM 셀들의 데이터 보유 시간에 대하여cumulative failure bit의 분포함수를 계산하였다 특히 sense amplifier의 감도 특성이 데이터 보유 시간 분포의 tail bit에 상당히 영향을 미침을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1559-1562
• /
• 2002

This paper describes a 0.13um ultra-high speed 1Mb CMOS SRAM macro with 1.7ns access time. It achieves ultra-high speed operation using two novel approaches. First, it uses process insensitive sense amplifier (Double-Equalized Sense Amplifier) which improves voltage offset by about 10 percent. Secondly, it uses new replica-based sense amplifier driver which improves bit- line evaluation time by about 10 percent compared to the conventional technique. The various memory macros can be generated automatically by using a compiler, word-bit size from 64kb to 1 Mb including repairable redundancy circuits.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.357-361
• /
• 2013

A regenerative Er-doped fiber amplifier system for a high-repetition-rate optical pulse train is investigated for the first time. A signal pulse train with a wavelength tuning range of 18 nm is produced by a passive mode-locked fiber laser based on a nonlinear polarization rotation technique. In order to realize the amplification, an optical delay-line is used to achieve time match between the pulses' interval and the period of pulse running through the regenerative amplifier. The 16 dB gain is obtained for an input pulse train with a launching power of -30.4 dBm, a center wavelength of 1563.4 nm and a repetition rate of 15.3 MHz. The output properties of signal pulses with different center wavelengths are also discussed. The pulse amplification is found to be different from the regenerative amplification system for CW signals.