• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.345-357
• /
• 2023

The present study conducted a stem analysis to trace growth information of Japanese larch (Larix kaempferi) and predict the future changes in growth volume. For this purpose, six L. kaempferi trees over 47 years old were cut at 1-2 m intervals from a height of 0.2 m, and circular plates of 5 cm thickness were collected for stem analysis. The analysis indicated that approximately 1-8 years are required to grow up to chest height. The annual height and diameter growth increased rapidly until the trees are 15 years old and gradually decreased after 20 years. The volume of 30-year-old trees in Oegam-ri forests, which were well-managed after artificial reforestation, was 0.4837 m³, whereas that in unmanaged Singi-ri forests was 0.1956 m³. Although the volume of individual trees differed greatly depending on the forest management status, it was found that the volume increased by 1.67-1.76, 2.49, and 3.49 times at 40, 50, and 60 years age, respectively, compared to the legal harvesting age 30. Therefore, factors such as the carbon dioxide reduction effect, forest management benefits, and the condition of trees at the site should be considered before harvesting trees.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.449-456
• /
• 2016

This study was aimed to quantify the amount of carbon dioxide emissions and to suggest suitable plans which consider the carbon emission reduction in the manufacturing process of the domestic structural glued laminated timber. Field investigation on two glued laminated timber manufacturers was conducted to find out material flow input values such as raw materials, transportation, manufacturing process, and energy consumption during manufacturing process. Based on the collected data and the relevant literatures about life cycle inventory (LCI), the amount of carbon dioxide emission per unit volume was quantified. Results show that the carbon dioxide emissions for sawing, drying and laminating process are 31.0, 109.0, 94.2 kg $CO_2eq./m^3$, respectively. These results show 13% lesser amount of total carbon dioxide emissions compared with the imported glued laminated timber in Korea. Furthermore, it was decreased about 37% when the fossil fuel would be replaced with biomass fuel in drying process. Findings from this study is effectively used as the basic data on the life cycle assessment of wooden building.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.34-42
• /
• 1991

Protection of tropical forest affects on significant reduce of tropical hardwood supply, and softwood resources will be increasingly important for the timber security in Korea. U.S. softwood log was most favorite species for Korean softwood log importers in overall import conditions except price stablization and consistency of export policy. Reduced export volume from Pacific Northwest to Korean market has been immediately replenished by rediata pine from New Zealand and Chilean plantation. Siberian timber will hardly play major roles in Korean timber market unless budding structure. softwood plywood and softwood furniture uses are enhanced. Recent rapid rise of labor cost and reducing tariff rrate in Korea provided better opportunities for import lumber in building materials market. Dry dimension lumber was relatively profitable when processed from import U.S. soft-wood log while green lumber was favorable products processed from radiata pine log in Korean lumber market. This means U.S. softwood lumber would have better opportunity to market for '2${\times}$'4 studs when wood frame housing is introduced. On the other hand while radiata pine is competitive on temporary construction lumber such as supporter and concrete forming frame in Korea. Shortage of raw material for the new capacity of board plants in Korea will be it bottle neck. Major log export countries to Korea as U.S. New Zealand and Chile showed high trade intensity indices of composite hoard produces for Korean market. As Korea efforts to diversify import sources, and tariffs are reduced to 8% as scheduled by 1994. countries of scoring higher comparative advantages as Portugal. Brazil, Austria as well as New Zealand will have better opportunity to penetrate into promised Korean composites hoard market.

• Structural Engineering and Mechanics
• /
• v.41 no.2
• /
• pp.231-242
• /
• 2012

This research work aims to develop an optimal design using Finite Element (FE) and Genetic Algorithm (GA) methods to replace the traditional concrete and timber material by a Synthetic Polyurethane fibre glass composite material in railway sleepers. The conventional timber railway sleeper technology is associated with several technical problems related to its durability and ability to resist cutting and abrading action of the bearing plate. The use of pre-stress concrete sleeper in railway industry has many disadvantages related to the concrete material behaviour to resist dynamic stress that may lead to a significant mechanical damage with feasible fissures and cracks. Scientific researchers have recently developed a new composite material such as Glass Fibre Reinforced Polyurethane (GFRP) foam to replace the conventional one. The mechanical properties of these materials are reliable enough to help solving structural problems such as durability, light weight, long life span (50-60 years), less water absorption, provide electric insulation, excellent resistance of fatigue and ability to recycle. This paper suggests appropriate sleeper design to reduce the volume of the material. The design optimization shows that the sleeper length is more sensitive to the loading type than the other parameters.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.809-820
• /
• 2016

The goal of this study was to predict lamina yield from logs of different diameter for production of cross laminated timber. Log characteristics of red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica), including diameter, length, volume, and defects were used for statistical and geometrical analyses, along with the lamina characteristics, including width, thickness, and defects. Based on the data obtained, the strong factors influencing the yield and grade of lamina from the two species were statistically evaluated. A geometrical approach was used for analysis of the yield from logs of given diameters. Statistical analysis showed that lamina yield was dependent on target lamina size but the grade of lamina was not related to any of the log characteristics. The suggested yield equations from the geometrical approach indicated an accuracy of less than 20% difference.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.67-75
• /
• 2011

Pyomindaehwa is a study book written in Korean and it takes a form of an investigation document made up of a conversation between Chosen's castaways and an interpreter taking place in Naesirogawa and Satsuma on the south end of Kyushu, Japan in the 19th century. This book is in three volumes. Many terminologies such as timber parts, sail, rigging and equipment have been shown in the last volume, which is mainly about a repairing process of drifting ship. Especially, timber parts' terminologies including hull's term were schematized in Kumamoto Text(1854b). This study have attempted to find out Naval architectural clues helping estimate actual drifting ship's type and bulk on the evidence of the contents. Based on the studies, it is possible to presume the type of Korean boats and ships, which are similar with the ones from database of 21 traditional fishing boats in the report on Investigation of Korean fishing boats studied previously. This paper has shown the logical process of presumption of types of boats.

• Journal of Korean Society of Forest Science
• /
• v.80 no.1
• /
• pp.9-19
• /
• 1991

This paper discusses the applicability of two simulation models for a ten year planning period in order to predict changing forest conditions. Two simulation models therefore were developed and applied to 3,844 ha of a national forest in Kangwondo province, which is managed by Joongbu Forest District Headquaters. Growth functions of three species were derived and used to predict the residual timber volume over time. Two alternative cutting schedules caused 10-14% difference in the residual timber volume in the end of ten year planning period. This suggests the important of correct decision-makings of forest managers in forest management planning.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.69-80
• /
• 2001

Larix kaemferi Carr. is one of main timber species in Korea that could be found in plantations and growing stands on all over the country The proper practice of thinning is one of very important techiques in silviculture, which greatly affects the quality and size of timber produced. Proper thinning period is considered to be important for maintaining stand growth before competition initiated. To investigate suitable thinning period, this study investigates the volume and radial growths of Larix kaemferi plantation in Mt. Worak located in the central part of Korea. The main findings and conclusions obtained from this study were as follow ; (1) The tree height curve equation for Larix kaemferi in Mt. Worak was calculated H=4.25783+0.80024D(H=Tree height, D=DBH). (2) To estimate tree volume for Larix kaemferi by DBH and tree height or only by DBH, regression equations were calculated as V=0.00147-0.002095D-0.000211H+0.00015D.H++$0.000744D^2$+$0.000008H^2$(V=Volume(($m^3$), H=Tree height(m), D=DBH(cm)), V=0.0000794-0.000512D+$0.000826D^2$. (3) The criteria of estimating thinning time of Larix kaemferi are the age when maximum tree height-MAI(mean annual increment) obtained and the age when annual DBH increments of dead trees decrease to below average. (4) The age of maximum tree height MAI was not significantly correlated with stocking. Therefore, it can not be used as a criterion for estimating thinning time of Larix kaemferi (5) The estimated thinning time equation of Larix kaemferi was obtained by regression analysis of the disk section collected from dead trees. The obtained equation is Y=0.2825+0.01752X(Y=Desirable thinning age, X=the sum total of nearest 4-trees interval(cm)). (6) General estimated thinning age of Larix kaemferi, which planted 3,086 stocks/ha, is concluded as 12 to 14 year.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.10-14
• /
• 1963

1. This is a study on the utilization volume of the 94 native Korean red pines in Kwangyan Forests. 2. The formulas which derived by the above investigation are follows. a. Hight growth curve ; $H=4.76+0.125D+0.0026D^2$ b. Cubic volume formula; $V=0.0000839D^{2.3}\;H^{0.2}$ c. The relation between utilization volume and log length ; Vu=0.1708-0.0230L d. The percentage of utilization, when length was 2 meters; $P=27.37\;D^{0.3648}$ e. The number of 2 meter long timbers; $N=0.0863D^{1.16}$ f. The equation of the utilization timber volume when log length was 2 meters; $Vu=0.0000159D^2\;H^{1.3}$ 3. As a conclusion, it was found that the utilization volume in the case of 2 meter log, was most greater than the others.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.