• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.84-90
• /
• 1985

The objective of this study is to analyze the market structure and price formation status of imported log from overseas which has leadership of timber price decision mechanism in Korea. The results obtained are as follows; 1) The 53 percents of the total 134 log importing companies are the small scale companies which import less than ten thousand cubic meters per year, and are mainly aimed to do agent task of importing log. 2) The market structure of imported log formed high level 01 oligopolistic structure, but did not make excess profit of oligopoly because of excess import. 3) The bargaining power of Korea on the price decision process in the overseas log exporting market is very weak, because the market has the bilateral oligopoly structure, and the non-systematic importing behavior of Korean log importing companies make the bargaining power of Korea more weak. 4) It is analyzed that Korean domestic marketing system is comperatively simple, but reasonable marketing system is not established because of the disorder of the marketing behavior. From the results obtained above, it is proposed that the government has to establish the general institutional system to control the supply-demand and marketing problems of imported log, in order to establish the rational structure of market and price decision system of imported log.

• Korean Journal of Environment and Ecology
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2005

The objective of this study was to monitor the edge vegetation development process after timber harvesting at deciduous hardwood forest in Seoul National University Forests of Baekwoonsan(Mt), Korea. From 1994 to 1999, Woody plants were monitored on two experimental plots established in 1994. The edge vegetation development pattern during the last six years(1994-1999) after timber harvesting is summarized as follows; Weigela subsessilis, Lindera erythrocarpa, Stephanandra incisa, Zanthoxylum schinifolium appeared to be a competitive species at the harvested forest edge. Staphylea bumalda, Lindera erythrocarpa, Viburnum erosum appeared to be a competitive species at harvested forest border between the harvested forest edge and the harvested interior. Weigela subsessilis, finders erythrocarpa, Lindera obtusiloba appeared to be a competitive species at the forest interior. The mean relative important value of major species were changed along the distance from the forest edge to the forest interior and seemed to be affected by aspect, and existing woody plants. But similarity indices seemed to be affected by distance. Species composition of forest edge(0-10m) was dissimilar to that of the other forest edge(40-50m). Species diversity indices, number of species and individuals were decreased according to the distance from the forest edge to the forest interior with passing time.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.582-591
• /
• 2019

This study was conducted to develop low-cost, simplified slope stabilization methods for the continuous utilization of skid trails, and to analyze the effect of the developed methods. Slope stabilization methods were created on the fill slopes of skid trails in the Forest Technology and Management Research Center of the National Institute of Forest Science.We measured the settlement and bearing capacity of skid trail surfaces, and the displacement of slope stabilization methods with respect to the number of passes (maximum 100 passes) by a logging truck weighing 17 tons. The constancy of slope stabilization methods was determined by measuring displacement of the stabilization structure with respect to the number of logging truck passes. Results showed that the bearing capacity in most cases was insufficient, but that the settlement of skid trails was less than 150 mm, which was considered reasonable. In addition, the stability of root staking wallswas somewhat low, but the average displacements of all slope stabilization methods were generally around 20 mm or less, indicating no issues regarding structural stability. By applying the simplified stabilization methods to skid trail maintenance following timber harvesting, efficient timber harvesting can be achieved. Additionally, these methods can be utilized as permanent forest management infrastructures and complement insufficient forest road facilities.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.337-345
• /
• 2004

The objective of this study was to monitor vegetation recovery process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored in 1997, 1999, 2001, and 2003. Vegetation development pattern during last ten years (1994-2003) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clear-cut, Styrax japonica and Lindera erythrocarpa as of sprout tree and Aralia elata as of seedling were dominant species in the sixth year after clear-cut, and Lindera erythrocarpa, Styrax japonica and Quercus serrata were dominant species from the eighth year to the tenth year after clear-cut. Species diversity index of harvested forest interior was decreased at the southwestern slope while it was increased in the northeastern slope till 6th year and decreased after the 8th year). According to DBH distribution pattern, No. of individuals of Quercus serrata, Styrax japonica and Lindera erythrocarpa showed high frequency in the southwestern slope, and Acer pseudosieboldianum, Styrax obassia, Magnolia sieboldii, Lindera erythrocarpa, and Aralia elata showed good growth in the northeastern slope. There was a difference between slopes in Basal area. It was decreased at the southwestern slopes during the 10th year continuously and it was increased the sixth year however, was decreased after the eighth year at the northeastern slope.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.673-682
• /
• 2001

The objective of this study was to monitor vegetation development process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored from 1994 to 1999. Vegetation development pattern during last six years(1994-1999) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clearcut, and Styrax japonica and Lindera erythrocarpa as of sprout tree) and Aralia elata as of seedling were dominant species in the sixth years after clearcut. Species diversity indices of harvested forest interior was decreased at the southwestern slope and increased at the northeastern slope. According to DBH distribution pattern, No. of individuals of Lindera erythrocarpa and Aralia elata showed vigorous growth in the sub-canopy layer and then Styrax japonica, Quercus serrata, Maackia amurensis, Lespedeza maximowixzii, Lindera obtusiloba, Staphylea bumalda, Clero-dendrum trichotomum, Weigela subsessilis, in order showed good growth in the sixth year after clearcut. Lindera erythrocarpa with a reversed J-shaped curve pattern by DBH class will be increased while Aralia elata with a J-shaped curve pattern will be decreased.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.227-235
• /
• 2019

In Korea, various methods are applied to prevent wooden structures from being damaged by termites. However, since there is no way to quickly bring toxic substances in contact with the termites inside the timber, it leads to the damage of wooden cultural property due to the prolonged period of controlling the termites. Accordingly, an indoor evaluation criteria study was conducted for the introduction of powder-type termiticides in Korea, which produced rapid control effects by drilling wood and directly contacting and transferring toxic substances inside the timber. First, contact toxicity and transfer ability of termite dusts were evaluated to establish the criteria for evaluation of effectiveness against Reticulitermes speratus. The contact toxicity confirmed 100% mortality of fipronil, deltamethrin and cyfluthrin termite dusts within 24 h of contact; however, differences occurred in the active ingredient transfer time to the sublethal. In addition, in the case of transfer ability evaluation, the rate of mortality gradually decreased under 1:9 and 1:25 ratio conditions; however, the difference in the reduction rate was identified depending on the type of termite dust. the results of the evaluation of compressive strength of the wood showed that the difference in the measured values between the control group and the conditions of perforation 1 to 3 times, which does not significantly affect the compressive strength of wood. In this study, the criteria of termite dust selection and evaluation method of dust-type termiticides were presented and the applicability of the method was identified.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.27-36
• /
• 2014

The purpose of this study is to provide necessary information for the establishment of remodeling range needed first to support the future remodeling of rural housing. For this, this study examined landscape characteristics of rural housing such as an outer wall, a roof, a fence, and a gate which are main elements of forming the landscape of a rural village and rural residents' perception for remodeling. The results were as follows. The subject rural housing mostly had a timber structure and a masonry structure. Common roof types were a hip-and-gable roof and a gable roof. Frequent materials were a panel, a tile, and slate and common colors were primary colors such as reddish brown, black, and gray. A fence made of cement blocks and finished by a white paint was often found. A closed gate with iron frames was common. A standup kitchen and a flush toilet inside the house were common. The family members of rural residents were mostly two including a farmer husband and his wife. Elderly people of sixty and over were the most common. For residential environment satisfaction, a half of respondents were not unsatisfied with residential environment mostly due to an old house. Most respondents who were not satisfied with residential environment had high perception for the need of remodeling. The most commonly asked remodeling part was a roof, followed by a toilet, and an outer wall, indicating that the need of exterior remodeling was higher than that of interior remodeling. For a remodeling method, a total improvement was preferred. Although some rural village housing was improved by support of the government, local governments, or social groups, there are still many old houses. As this co-existence of improved houses and old houses hinders the landscape of rural village, it is necessary to give a support. But rural residents' requests should be first actively reflected to establish a guideline of supporting rural house remodeling.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• Journal of Conservation Science
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

The Main Hall of the Fengguo monastery in Yixian county, Liaoning province, China, is the best preserved and largest wooden Buddhist structure, typical of the Liao dynasty style, in China. However, some degradation to the timber frame of the Main Hall has been noted, and this is causing concern in terms of the long-term preservation of the structure. In this study, wooden pillars showing the degradation phenomena of whitening, for areas in contact with the stone floor, and extensive surface damage at higher locations(mostly above 1 m) have been examined. Samples taken from wooden pillar surfaces were analyzed using X-ray powder diffraction, Fourier-transform infrared spectroscopy(FTIR), ion chromatography, and pH measurements. With respect to the whitening phenomenon, we found inorganic calcium precipitates and oxalate ions, along with higher pH values. These symptoms indicated that chemical changes were taking place in response to alkaline conditions, suggesting that alkaline mixtures with calcium content in the foundations may be responsible. Regarding the upper surface-damaged areas, no valid evidence for chemical degradation was found using FTIR analysis, while damaged areas exhibited the presence of more bat guano-related materials than which were apparent in undamaged areas. The occurrence of this surface-damaged phenomenon has therefore been attributed to physical damage caused by bat activity over long periods of time.

• Journal of Korea Multimedia Society
• /
• v.17 no.3
• /
• pp.393-404
• /
• 2014

This research proposes a method to draw a number of components for roof frame in 3D datum. It is based on the analysis of the roof curvature and their geometric relationship in the traditional wooden buildings. Correlations between the components that generate a roof surface is defined with functional formula. The design system which automatically generates 3D datum for the components is implemented by reflecting the structural mechanics for them. The suggested system provides a control function to easily draw a traditional house. In this system, the components engaged in forming a roof surface are not only automatically generated but also simply modified according to the user's request. It would improves design efficiency and ensure a various roof surface design. Furthermore it makes possible systematic drawing and standardized industrial processing. Consequently, the proposed method is expected to contribute to the popularization of traditional house constructing.