• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.341-350
• /
• 2015

The preservation has been conducted for wooden ship timber excavated from Bonghwang-Dong, Gimhae, Korea. The species were analyzed for conservation as pre-treatment. Outer panel was analyzed as Cinnamomum spp. and trapezoid wooden material, wooden wedge was Cryptomeria japonica D. Don.. Wooden ship timber have been treated by vacuum-freeze drying after impregnation with aqueous PEG#3,350 solution(almost 45%). The timber of Bonghwang-Dong ship is considered as Japanese ship that many data such as conformation of ship, location of site, japanese artifact of around site were confirmed. In addition, The ship timber give us the important information about the international trade with Japan.

• Korean Journal of Environment and Ecology
• /
• v.19 no.3
• /
• pp.258-268
• /
• 2005

The objective of this study was to monitor the edge vegetation development process after timber harvesting at deciduous hardwood forest in Seoul National University Research Forest of Baekwoonsan (Mt), Korea The results from the 4th (2001) and 5th (2003) survey for edge vegetation development process after timber harvesting are summarized as follows. The competitive species at the harvested forest edge are Lindera erythrocarpa, Weigela subsessilis, Lespedeza maximowiczii, Lindera obtusiioba, Arajia eiata. There were Lindera erythrocarpa, Ivelgela subsessilis, Staphyiea bumaida as competitive species at harvested forest border between harvested forest edge and harvested interior. And at the forest interior, the competitive species were Lindera erythrocarpa, Lindera obtusiloba. There were differences in the competitive species at the forest edge due to the differences in direction, altitude, and existing dominant species. But Lindera erythrocarpa, Weigela subsessilis were appeared to be a competitive specieg at the southwestern slope (A site) and northeastern slope (B site). After timber harvesting, Sasa borealisshowed a good growth in early days, but showed a tendency of declining with the developing of canopy layer And coverage was generally higher at the Northeastern slope (Site B) than southwestern slop (Site A). The similarity index was lower as the distance from the forest edge becomes farther.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.383-392
• /
• 1992

The objective of this study is to evaluate the impacts on the domestic timber supply potential of forest resources management policies such as the extention of forest management infrastruture and setting aside more forest lands for the provision of environmental goods. To this end, the domestic timber supply functions were estimated using time series data for the period 1970-1990 and were used to predict the future trends in timber production in the Republic of Korea. For this purpose, a set of scenarios based on the forest road density and forest inventory growth were designed for the next 40 years. The timber supply behavior in Korea was found to be different by species group : domestic supply of softwood roundwood is inelastic with respect to its ovum price while that of hardwood elastic. The effect of forest road construction on the domestic timber production seems to be insignificant yet. The model simulation aided by policy scenarios revealed that the future timber supply potential will be largely restricted if the policy option with emphasis on the provision of environmental goods from the forest resources were adopted.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.156-167
• /
• 2015

The aim of this study was to determine the physical and mechanical properties of glued laminated timber (glulam) manufactured from small-diameter logs of three wood species, Acacia mangium (mangium), Maesopsis eminii (manii), and Falcataria moluccana (sengon), with densities of 533, 392, and $271kg/m^3$, respectively. Glulam measuring 5 cm by 7 cm by 160 cm in thickness, width, and length, respectively, was made with three to five lamina, or layers, and isocyanate adhesive. The glulams contained either the same wood species for all layers or a combination of mangium face and back layers with a core layer of manii or sengon. Solid wood samples of the same size for all three species were included as a basis for comparison. Physical-mechanical properties and delamination tests of glulam referred to JAS 234:2003. The results showed that the properties of same species glulam did not differ from those of solid wood, with the exception of the shear strength of glulam being lower than that of solid wood. Wood species affected glulam properties, but three- and five-layer glulams were not different except for the modulus of elasticity. All glulams were resistant to delamination by immersion in both cold and boiling water. The glulams that successfully met the JAS standard were three- and five-layer mangium, five-layer manii, and five-layer mangium-manii glulams.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.274-284
• /
• 2008

For forest valuation, various input data were generally required: for example, slope, timber stocks, logging costs, hauling costs, market values of timber, afforestation costs, thinning costs, and so on. To enhance the efficiency of forest valuation process, it would be helpful to guide how and where to acquire such data sets. Moreover, to make an appraisal of timber assets through the Forestry Household Economy Survey, it would be inevitable to use standardized input data by region or tree species. Therefore, this research intended to develop a methodology of standardizing each input data, and to present its available data sources. Also, a guidance was presented to explain how to control input data within the appraisal process. Then, the appraisal process were analyzed and summarized in four types of information such as system flowchart, process flowcharts, detail flowcharts, and skimmer data, which are essential elements in developing an appraisal software, named EnVAST (Engine of Valuation System for Timber Assets). The software was designed to generate 'the standard forest valuation table' by species and province as the final output that is applicable for the forest valuation through the Forestry Household Economy Survey in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2004

Three species of Italian poplar (Populus euramericana), red pine (Pinus densiflora) and oriental oak (Quercus variabilis) were selected for this study. They were cut so that the distances between each of tips and roots for a pair of fingers were 0, 0.15, 0.30 and 0.45 mm. Poly vinyl acetate (PVAc) and resorcinol-phenol resin (RPR) were used for finger-jointing. Compressive test parallel to the grain was conducted for the finger-jointed specimens. The results were as follows: The efficiency of compressive Young's modulus of finger-jointed timber to solid wood indicated low values, whereas the efficiency of compressive strength indicated high values of more than 90% in all species, especially, it was found that those of red pine indicated markedly high values of more than 97%. The efficiency of compressive displacement of Italian poplar finger-jointed timber was 2 times higher than solid wood, and it was 1.2 and 1.3 times higher than solid woods in red pine and oriental oak, respectively. Also, it was found that 0, the distance between each tip and root for the fingers, indicated the highest efficiency of compressive strength performance in Italian poplar finger-jointed timber, and for red pine and oriental oak finger-jointed timbers, the distances of 0.15 and 0.30 were found to indicate the highest efficiency.

• The Korean Journal of Ecology
• /
• v.21 no.5_2
• /
• pp.519-529
• /
• 1998

The vegetation of alpine and subalpine zone from timber line, 2,000m altitude, to the upper area of Mt. Packtu were investigated by phytosociological method. The plant distribution along to the different altitudes shown as follows: Betula ermani community with Rhododendron redowskianum occupied dominantly at 2,000m area as patch forms, Rhododendron redowskianum community with Vaccinium uliginosum, at 2,180-2,200m area, both Vaccinium uliginosum and Rhododendron redowskianum community were compatible with each other at 2,243m area. Rhododendron redowskianum community at 2,250, Salix rotundifolia community, Erigeron thunbergii var. glabrata community, Dryas octopetala var. asiatica community and Carex atrata community were occurred frequently at 2,263m around Chonji Lake. Rhododendron aureum, Thunbergii coccinea and V accinium uliginosum showed higher cover degree than other species at 2,370m area, Phyllodoce coerulea-Rhododendron aureum community at 2,400m, Rhododendron redowskianum community at 2,470m, Rhododendron aureum community at 2,490m, Salix rotundifolia at 2,520m, Rhododendron redowskianum community at 2,580m, Dryas octopetala var. asiatica community, Salix rotundifolia, and bistorta achotensis etc. at 2,650 altitude area were settled as sparse, creeping shape on the surface soil and dwarf plants of about 15cm heights.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.196-196
• /
• 1982

There is a heavy stocked wood volume in the forest of Kang-Won Province compared with the other forests of Korean Provinces. It mainly, however, consists of non-productive and inferior hardwoods and shrubs which grows naturally. -This naturally grown hardwood forest should be cut and reforested with more economical confierous and diciduous tree species by artificial and natural regeneration under the positive government support. This study was carried out to survey the reasonable and economical utilization measures on harvesting wood products when existing hardwood forest should be cut primarily. This is the rust report on the resources and the classification of tree species by the uses of wood growing in the hardwood forest of Kang-Won Province. According to the investigation, 321 hardwood species are growing in this forest, and 141 species of them are extremely not suitable for wood production. The usable species as fuel wood was 180, and these are able to classify into the 22 groups by the uses of wood.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2015

Zelkova serrata is an important hardwood species for the timber industry in Japan. Tree breeding programs for this species have mainly focused on growth characteristics such as stem diameter (D), tree height (TH), stem form, and branching. In order to fulfill timber industry needs, wood quality improvement should be included in the tree breeding program of this species. In the present study, growth characteristics, such as D and TH, and the stress-wave velocity (SWV), which is highly correlated with Young's modulus of wood, were measured for 20-year-old Z. serrata from eight half-sib families planted in a progeny test site with three different initial spacings. Significant differences in all the measured characteristics were found among the eight half-sib families. The variance components of the half-sib families for D, TH, and SWV were 27.2%, 47.3%, and 33.5%, respectively. These results indicate that all the measured characteristics of this species could be improved by tree breeding programs. In addition, only low correlation coefficients were obtained between the growth characteristics and SWV, indicating that extensive selection on SWV in tree breeding programs may not always lead to a reduction in yield volume.