• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.603-611
• /
• 2014

When image sensor and lens are fixed on the module, mechanical errors often induce tilt, rotation, or narrow field-of-view of the acquired image. Therefore, the optical characteristics of image sensor modules should be tested by test equipments. This paper explains how to test the optical characteristics of images sensors. It also proposes the standardized description methods of optical characteristics tests which are similar with those of image acquisition characteristics tests. The proposed method helps the test equipments to perform image acquisition characteristics tests and optical characteristics tests together.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.50-56
• /
• 2008

In this paper, a digital inclinometer to measure the angle and acceleration signals of subject laid on Roll was designed. The designed system consists of a tilt sensor, biaxial accelerometer, single chip microprocessor and Bluetooth module. The designed digital inclinometer was easy to handle and to wear. To evaluate the performance of the system, we measured simultaneously the angle and acceleration signals from the 3 subjects on the Roll using two instruments which are ZEBRIS and designed system. The measured signals were processed by statistical method and then the correlation coefficient of 0.93 was shown. From the results, the designed digital inclinometer is shown to be useful in assessment of body movement.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2021

In this paper, an aircraft warning light's optical system was designed using an LED light-source module and a collimating Fresnel lens. As for the optical system, a collimator Fresnel lens was designed for each module to satisfy a vertical-elevation center luminous intensity of 20,000 cd and the divergence-angle luminous-intensity standard conditions of the Ministry of Land for Infrastructure and Transport for aircraft warning lights. In addition, the optical system was optimized by adjusting the position and tilt of the LED light-source module and Fresnel lens. By analyzing and comparing the light-distribution characteristics of the optical system, an aircraft-warning-light optical system with optimal performance was obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.191-196
• /
• 2006

This paper presents the moving object tracking method using vision system. In order to track object in real time, the image of moving object have to be located the origin of the image coordinate axes. Accordingly, Fuzzy Control System is investigated for tracking the moving object, which control the camera module with Pan/Tilt mechanism. Hereafter, so the this system is applied to mobile robot, we design and implement image processing board for vision system. Also fuzzy controller is implemented to the StrongArm board. Finally, the proposed fuzzy controller is useful for the real-time moving object tracking system by experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.197-205
• /
• 2006

This paper presents the moving object tracking method using vision system. In order to track object in real time, the image of moving object have to be located the origin of the image coordinate axes. Accordingly, Fuzzy Control System is investigated for tracking the moving object, which control the camera module with Pan/Tilt mechanism. Hereafter, so the this system is applied to mobile robot, we design and implement image processing board for vision system. Also fuzzy controller is implemented to the StrongArm board. Finally, the proposed fuzzy controller is useful for the real-time moving object tracking system by experiment.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.3
• /
• pp.69-75
• /
• 2005

The PV-Solarwall system has been introduced as a promising alternative to harness solar energy for both heating applications and electricity generation simultaneously. The system comprises a PV solar panel(for electricity generation). In addition, the solarwall incorporates a fan strategically located behind the PV panel to bring the warm and fresh air from the solarwall into the room. Because of its location and convective cooling principle, the fan also serves to reduce the operating temperature of the PV panel thereby increasing its efficiency. So this PV-Solarwall system holds much promise for saving heating and electricity costs compared with a PV system without solarwall. In particular, by controlling the tilt angle of the entire PV-Solarwall system between $0^{\circ}$(horizontal) and $90^{\circ}$(vertical), the performance of the system can be further evaluated. It is expected that the range of tilt angle PV-Solarwall between $40^{\circ}$ and $50^{\circ}$ will improve the output of the system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1227-1232
• /
• 2014

This paper relates 10% shrink from $0.13{\mu}m$ design for core devices as well as input and output (I/O) devices different from previous poly length shrink size only. We analyzed body effect with different channel length and doping profile simulation. After fixing the gate oxide module process, LDD implant conditions were optimized such as decoupled plasma nitridation of gate oxide, TEOS oxide $100{\AA}$ before LDD implant and 22o tilt-angle(45o twist-angle) LDD implant respectively to match the spice DC parameters of pre-shrink and finally matched them within 5%.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.532-537
• /
• 2009

The necessity of intelligent surveillance system is gradually considered seriously from the space where the security is important. In this paper, we embodied unmanned intelligent system by developing embedded mobile robot based on images and sounds tracking. For objects tracking, we used block-matching algorithm and for sound source tracking, we calculated time differences and magnitude dissimilarities of sound. And we demonstrated the superiority of intruder tracking algorithm through the embodiment of Pan-Tilt camera and sound source tracking module using system, Network camera and mobile robot using system and mobile robot using system. By linking security system, the suggested system can provide some interfacing functions for the security service of the public facilities as well as that of home.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.371-375
• /
• 2013

A new model about output power prediction of PV module with various tilted angles and cell to cell distances has been proposed in this paper. Light intensity arrived on a solar cell could be changed by characteristics of PV module materials. Refractive indices, thickness and absorption coefficients of glass, EVA, solar cell and Backsheet are used to predict output. Also, the incident angle of light is changed 0 to 90[$^{\circ}$] and cell to cell distances are 5, 10 15[mm]. Two types of light incident on a solar cell are considered which are direct to a solar cell and reflected from Backsheet. The intensity of the incident light directly into the solar cell is reduced through glass and EVA about 17.5[%] in theoretical way. It has an error of 2.26[%] compared with experimental result. The results for compare theoretical with experimental data is validated within the error of 6.3[%]. This paper would be a research material to predict output power when the PV module is installed outdoor or a building.