• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.305-313
• /
• 2020

Root hair development has the potential to increase crop yields and at the same time to decrease fertilizer use, which will be required in the next 30 years to meet the demand for crop-derived commodities in a world with decreasing available natural resources. Root hair defective six (RHD6) encoding a basic helix-loop-helix transcription factor, is associated with root hair differentiation, and its roles are root hair initiation and elongation. Grass plants, rice and Brachypodium have been used as model plants to study the gene function of the root hair defective six like (RSL) subfamily which is orthologous to AtRHD6. The RSL subfamily has an identical gene function with AtRHD6 which is involved with root hair differentiation as well. Plants with longer root hairs within a species should have an improved Pi uptake efficiency; therefore, we would expect that a plant with a high Pi uptake could contribute to increasing the plant yield. We achieved increased root hair length by manipulating the RSL subfamily genes. It is expected that in these transgenic plants, the long root hairs would be sufficient to improve the Pi uptake and hence improve biomass and yield component (tiller, spikelet number, and spikelet weight) of the plant. Here, we demonstrate that Brachypodium transgenic plants overexpressing the BdRSL subfamily genes have an improved biomass and grain yield. The result of this study could be applied to important crop plants like rice.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.36-44
• /
• 1983

Farm population was rapidly decreasing due to shift of the people from farm sector to the non-farm sector caused by the economic growth of the country. Especially, a great shortage of farm labor in busy farming period in June and October is becoming a serious problem in maintaining or promoting land productivity. The peak of labor requirement in summer is caused by rice transplanting and barley harvesting. In order to reduce the restrictions imposed on farm management by the concurrence of labor requirement and the lack of labor, the experimental study for mechanization of barley harvesting has been carried out in the fields. 1. The machines for barley harvesting were knap-sack type reapers, windrow reaper (power tiller attachment), binder and combine. The order of higher efficiency of machine for barley harvesting was combine, binder, windrow reaper (WR), knapsack type reaper 1(KSTR1), and knap sack type reaper 2(KSTR2; mist and duster attachment). 2. The ratio of grain loss for the manual, binder, and combine plot was about four percent of total field yield. 3. The total yield of barley in 35 days and 40 days harvesting after heading were 514 kg and 507kg per 10 ares respectively. The yield of 35 days-plot was higher than other experimental plots. 4. The lowest yield was recorded in 30 days-plot due to the large quantity of immatured grains and having lighter 1000-grain weight. The ratio of immatured grains was 2.66 percent and 1000-grain weight was 29.4 grams. 5. The total harvesting cost of the windrow reaper was 10,178 won per 10 ares. It was the lowest value compared to other machines. The next were combine, binder, KSTR1, KSTR2, and manual in sequence. As a result, the optimum time of barley harvesting for mechanization was 35-40 days after heading. Combine, binder, and windrow reaper were recommended as the suitable machines for barley harvesting in the work efficiency. However, in total harvesting cost, the windrow reaper was the most promising machine for barley harvesting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.246-261
• /
• 2023

We investigated critical temperature for early marginal transplanting (CT-EMT) of the contemporary japonica rice varieties in Korea through the field, pot seedling tray, and the phytotron experiments during 2020 to 2023. The lowest mean temperature for 10 days from transplanting (MT-10DFT) that resulted in earlier heading date was 12.4℃ and the highest MT-10DFT that did not show the earlier heading date was 12.0℃ in the field study when the MT-10DFT varied by changing transplanting date. The lowest MT-10DFT that induced the increased biomass but not the earlier heading date was 11.6℃ and the highest MT-10DFT that showed neither the increased biomass nor the earlier heading date was 11.4℃. Compared to the 10-day later transplanting, the dates of the first root development, initiation of the chlorophyll recovery, and the first tiller development were earlier when the MT-10DFT was 9.1℃ or higher, 10.5℃ or higher, and 11.6℃ or higher, respectively, in the pot seedling tray and field experiments. The earliness of the first tiller development was a practical index for the estimation of CT-EMT during the early growth stage of rice. The response of transplanted rice to temperature treatments with the diurnal change of 10℃ in the phytotron study was similar to that shown in the field study. The data shown for constant temperature without a diurnal change revealed that the extent of positive effects of high temperature at day-time was greater than the extent of negative effects of low temperature at night-time on the early growth of transplanted rice. It was concluded that the critical MT-10DFT for early marginal transplanting of japonica rice in the temperate environments was between 11.4 to 11.6℃ based on the plant growth and between 12.0 to 12.4℃ based on the plant development.

• Asian Journal of Innovation and Policy
• /
• v.6 no.1
• /
• pp.58-84
• /
• 2017

This article aims at demonstrating location specific approach for agricultural technology promotion and adoption in improving the livelihood of the small farmers in the haor basin and coastal belt of Bangladesh. Innovative technologies that have potentials are initially screened by ex-ante investigation and instrumented by the business model canvas, which is used as a bottom-up approach for sustainability of the adoption of proposed technology innovations. Village-level extension farmers, sub-district extension officers and farmers' cooperative are the unique and central features to the business models and forward linkages. Extension service, power tiller, low-lift pump, sunflower, shallow tube well, quality seed, forward linkage for farmed duck eggs, live ducks and open catch fish etc. are the suggested potential technology innovations for the small farmers. The technology adoption business model can be reinvented for different locations within or beyond the country considering the local agricultural problems and prospects for greater sustainability.

• The Plant Pathology Journal
• /
• v.27 no.3
• /
• pp.249-256
• /
• 2011

Tall fescue (Schedonorus phoenix Scop.) is resistant to abiotic and biotic stresses through a symbiotic relationship with Neotyphodium coenophialum. However, this endophyte has been considered detrimental since it produces toxic alkaloids to animals. It is vital to understand mutuality between these two to maximize positive impact of the endophyte on agri-ecosystem. Little research has been conducted on endophyte transmission mechanism in planta. To provide basic information related to endophyte transmission, an experiment was conducted to examine the effect of endophyte genotype and water stress on endophyte transmission by imposing soil moisture deficits at different stages of panicle development. There was water stress effect on endophyte frequency but not on concentration, whereas endophyte genotype significantly influenced endophyte concentration in pseudostem of tall fescue at boot stage. Reproductive tillers showed greater endophyte frequency and concentration. Endophyte frequency in florets or seeds depended on position within panicle. There was no drought effect on endophyte concentration, but showed the effect of endophyte genotype on endophyte concentration in florets and seeds. Overall endophyte concentration in seeds was higher. From this study, we may conclude that although water stress reduced endophyte frequency in vegetative tiller, water stress does not have effect on endophyte transmission, suggesting that drought is not an important factor controlling the endophyte transmission from plant to seed. Endophyte genotype and seed position in a panicle affected endophyte transmission, indicating that these two factors are involved in endophyte transmission and may determine seed transmission of endophyte in tall fescue.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.224-229
• /
• 2008

This study was aimed to minimize the impact force and vibration transmitted to the transporting materials from the trailer and wheel shaft by installing the leaf spring suspension device at the space between the wheel shaft and frame of power tiller trailer. The developed trailer equipped with leaf spring suspension device was compared to the existing trailer without suspension device, in order to identify the vibration absorption effect of the leaf spring. The results of this study could be summarized as follows; (1) The length and the maximum bending amount of the leaf spring were designed as 1,000 mm and 42 mm, respectively, considering the possible space for installing at below the trailer. When 4 leaf springs were installed on both wheel shafts, the allowable maximum load was identified as 9,418 N. (2) The average vibration accelerations for the frequency less than 20 Hz, where the severe transporting loss could be represented, were $0.017\;m/s^2$ and $0.133\;m/s^2$ for the developed and the existing trailer, respectively, showing the vibration absorption effect of about 87%. And the average vibration accelerations on the driver's seat for the frequency less than 20 Hz were $0.01\;m/s^2$ and $0.20\;m/s^2$ for the developed and the existing trailer, respectively, which showed the similar vibration absorption effect. (3) The change of the average vibration accelerations for the frequency from 20 Hz to 80 Hz showed the similar tendency with the result for the frequency less than 20 Hz, but the effect for developed trailer was reduced slightly. And the effect of vibration absorption for the above 80 Hz was reduced highly. However, by installing the leaf spring suspension device at the trailer, the low frequency below 40 Hz, which could affect on transporting loss severely, could be reduced highly. (4) The maximum vibration acceleration for the frequency less than 20 Hz were $0.027\;m/s^2$ and $1.267\;m/s^2$ for the developed and the existing trailer, respectively. And the change of maximum acceleration between 20 Hz and 120 Hz was showed similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Korean Journal of Agricultural Science
• /
• v.28 no.1
• /
• pp.8-17
• /
• 2001

This study was carried out to obtain a basic intonation for the development of a new com hybird with tillers. Materials used in this study were 20 lines having three to four tillers per plant including the PI213749 U.S. line with non-tillers. These 20 lines were compared for the botanical characteristics and genetic distances were measured using RAPD analysis. Flowering date of the K15 was very earlier, while the K07 was very late in flowering date. Stem height and ear height were similar except for K04 and the K15. K06, K13 and K19 lines were appeared to be resistant to lodging due to decreased ear height. Number of tillers per plant of lines used were shown three to five on average. K09 showed the highest kernel yield, while the K08 was low. Among characteristics measured tiller per plant and flowering dates, and silking dates showed a positive correlation, while 100 kernels weight, flowering date and ear height were shown a negative with tillers per plant. A total of 17 bands by RAPD analysis using four per primer were appeared and these lines were classified into three groups, especially the third group could be classified into of four sub-groups.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.172-181
• /
• 2020

Koshihikari has been one of the most popular rice cultivars with good eating quality since the 1960s despite its susceptibility to blast disease and lodging. To map the genes controlling blast resistance and to develop promising blast-resistant breeding lines inheriting Koshihikari's high eating quality, a recombinant inbred line (RIL) population was developed from a cross between Koshihikari and a blast resistance donor with early maturity, Baegilmi. A total of 394 Koshihikari × Baegilmi RILs (KBRIL), and the two parents, were evaluated for blast resistance and major agronomic traits including heading date, culm length, panicle length, and tiller number. A linkage map encompassing 1,272.7 cM was constructed from a subset of the KBRIL (n = 142) using 130 single nucleotide polymorphisms. Two quantitative trait loci (QTL) for blast resistance, qBL1.1 harboring Pish/Pi35 and qBL2.1 harboring Pib, were mapped onto chromosomes 1 and 2, respectively. qBL1.1 was detected in both of the experimental sites, Namwon and Jeonju, while qBL2.1 was only detected in Namwon. qBL1.1 and qBL2.1 did not affect agronomic traits, including heading date, culm length, panicle length, and tiller number. From the 394 KBRILs, lines that were phenotypically similar to Koshihikari were selected according to heading date and culm length and were further divided into the following two groups based on blast resistance: Koshishikari-type blast resistant lines (KR, n = 15) and Koshishikari-type blast susceptible lines (KS, n = 15). Although no significant differences were observed in the major agronomic traits between the two groups, the KR group produced a greater mean head rice ratio than the KS group. The present study provides useful materials for developing blast-resistant cultivars that inherit both Koshihikari's high eating quality and Baegilmi's blast resistance.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.43-54
• /
• 1993

This experiment was conducted at Andong county cropping season to investigate rice response and consequent changes in the physiological activities and agronomic characters of rice as affected by growth regulator treatments, and to determine how low temperature controls some plant growth mechanisms. Plant growth regulators, particularly ABA, applied to 15 DAT regardless of concentration, gave higher tar plant height and tiller number after 10days of low temperature treatment than did the untreated plant. However, the differences in plant height and tiller number among treatments diminished to plant growth. Chlorophyll content seemed to be enhanced by growth regulators under low temperature condition. The 10-day treatment of low temperature decreased chlorophyll content by more than 17% compared with the untreated control. The oxidizing activity of roots decreased sharply to 52.2a after 10 days in low temperature condition. On the other hand, ABA at concentration of $10^{-4}M$, highly attains oxiding activity of roots. Generally, plant growth regulators applied at 15 DAT under low temperature reduced grain yield more than did the untreated control which can be attributed to decreased yield components. When growth regulators were applied to booting stage, the tiller number did not show significant difference, whereas the significant difference in culm length at harvest was observed in all treatment as a result of different concentration of growth regulators. The growth regulators generally exhibited a significant effect on yield component except on panicle length. Grain yield of low temperature treated plot at booting stage was significantly influenced by application of growth regulators. This was due to decreased number of spikelet and low filled spikelet percentage. However, TIBA treatment at booting stage showed no significant differences in grain yield.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.140-146
• /
• 2009

The garlic, along with the red pepper, is one of the major seasoning vegetables in Korea. Garlic clove planting is one of the most laborious operations. Labor cost is the main source of high production cost of the garlic. Because of the geometrical uniqueness and irregularity of garlic cloves, mechanization of garlic clove planting is very difficult. To overcome price competition against the imported garlic, however, there has been a need of development of a clove metering device and a planting device for the garlic clove planter. Computer simulation, laboratory tests and field tests were conducted to develop a garlic clove planter. This research was conducted to drop garlic cloves into a soil holes through a drum bucket metering system and a rotary type planting system. Followings are the major achievements from this study. 1. The metering device consisted of a drum, a guide, a bucket and a bucket cover. Opening positions of the metering hopper were evaluated at different positions and trajectories of planting hoppers. The simulation showed that the optimum positions of hopper was -15${\sim}$0 mm in the x direction. 2. When the planter was tested under different soil textures and water contents, the best performances were obtained in a upland field with 29.1% water content and a paddy field with 18.3% water content where single clove metering and missing rate were 88.4% and 1.3%, and 90.7% and 2.0%, respectively.