• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.64-87
• /
• 2005

The purpose at this study is to develop the appropriate bodice model for Chinese women in order to contribute to the improvement of fitness at clothing products that are exported to China. The sample group was the subject of 149 persons with the standard body shape at 19-24 years old women who reside in Beijing and Shanghai, China. The data analysis is processed for statistics using SPSSWIN 10.0 PROGRAM, and the used analysis methods are technical statistics analysis, factor analysis, group analysis, and one-way ANOVA. The outcome of this study is summarized as follows. 1. Prior to develop the tight-fitting shape of bodice model, the body classification approach by the posture and type of bending and stretching is selected to use 6 index items, and the body types are classified into bent body, right body, and pull-back body. 2. The average body size of standard body shape had 3 times of wearing experiment based on the tight-fitting shape of ESMOD bodice block drawing, and the system was corrected and supplemented to present the final bodice block drawing. 3. Comparisons have been made based on the center front line, center back line and chest circumference for each of existing bodice block for Chinese women, existing bodice block for Korean women and the combination of the bodice block under this study.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.195-202
• /
• 2006

Tight-fitting clothing pattern reflecting the accurate information of the 3D body shape has been one of the challenges for garment industry, however, fitting problems still exist. The objectives of the paper is to develop a 2D pattern which fits tightly to the 3D human scan data for sports suits that need comfort and function for maximum performance. In this study, the user graphic interface application software for the semi-automatic garment pattern generation has been implemented using the triangle simplification scheme together with 2D projections of free-falling of 3D surface polygons keeping the original 3D surface area preservation. A typical application of the developed pattern to the functional body suits is presented and verification of the proposed method is also provided.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.129-141
• /
• 2003

The aim of this study was to improve the fitness of Korean made apparel products being exported to China by developed the standard bodice block for the standard body of chinese women. For study, 139 adult Chinese women(aged between 19 and 24) in Beijing and Shanghai were sampled to be measured for there body sizes. In order to develope the standard bodice block, 3 women was selected closely the standard body measurement and the fitting was tested. The results of this study were as follows. As compared with the means measurement of chinese women in Beijing and Shanghai, there were difference between the two. Especially, width, thickness, girth and hight items. The standard bodice block drafted and tested. It showed unfit problems. and were adjusted. The application measurements of standard body was selected. As based on item, it has finally developed the standard bodice block of tight-fitting shape.

• Journal of the Korean Home Economics Association
• /
• v.39 no.8
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.107-116
• /
• 2011

Purpose: The review article was written to establish an excel program that could calculate minimal Dk of contact lens without $O^2$ deficiency and actual $O^2$ concentration on cornea when contact lens were being fitted by changing lens-related factors. Methods: An excel program was formulated to calculate the thickness of post-lens lacrimal layer, Dk of contact lens and $O^2$ concentration on cornea. Results: With the excel program established, minimal $O^2$ concentration needed on cornea could be calculated when the thickness of post-lens lacrimal layer was changed by varying lens-related factors. A different route in the excel program was needed to choose based on the shape of lacrimal layer. The thickness of lacrimal layer was determined by the shape of meniscus made of tear between lens edge and cornea with flat fit. Thus, the $O^2$ concentration showing negative number in calculation decreased on peripheral cornea with flatter fitting and actual $O^2$ concentration would be zero on cornea. With tight fitting, the thickness of post-lens lacrimal layer is much thicker than lens itself thus negative number in calculation by the excel program is shown indicating zero oxygen on cornea. It can cause $O^2$ deficiency regardless of Dk of contact lens. Conclusions: The calculation of thickness of post-lens lacrimal layer and $O^2$ concentration on cornea by the established excel program is suggested to avoid $O^2$ deficiency when fitting state is varied by changing lens-related factors.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.91-103
• /
• 2014

Shirts which have been a inner-wear in men's suit in the past, are being changed into an item that 20's men utilize to their individuality. Dress shirts have gotten out of its shape, becoming tight and slim with activity and fashion trend. In this study, two patterns of fitted dress shirts in a clothing construction text book were compared with the pattern of an apparel company with regard to the size tolerance and appearance silhouette; this comparison was performed through a fitting test and an appearance evaluation. According to the study, size tolerance of chest girth and waist girth were about 6~8cm and 10~18cm, respectively. Neck girth of the collar was tight in both the fitting test and appearance evaluation. Thus, the measurement value of the neck base girth had to be used for the collar pattern making. Moreover, approximately 35cm is a moderate size for the width on the upper arm in sleeve. Therefor the factors such as size tolerance of waist girth, height of sleeve cap, slim sleeve width and measurement value of neck base girth are being considered for the pattern making of fitted dress shirts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.3
• /
• pp.526-538
• /
• 2016

Breast cancer surgery result in changes in clothing style due to changes in the size of the breast as well as body shape. This study provides basic data as a fashion therapy to improve the quality of life for breast cancer patients who have to change clothing habits after surgery. The regression results found that the most important factor are pain and the amount of breast loss for clothes style changes after breast cancer surgery. Breast cancer patients suffer pain relative to the proximity to the date of surgery and regardless of the breast cancer resection range. However, the changes in clothes style relates to the amount of pain and breast reduction range. The t-test results on the change of the clothing styles for before and after breast cancer surgery showed that women significantly prefer comfortable clothes with sleeves and consider a closure style on clothes to put on and take off instead of clothes that are tight-fitting, have thin fabric or deep neck lines. Painful breast cancer results in women who prefer closure style on clothes, front closure clothes and garments that hide body shape. However, the larger reduction range of breast cancer patients and those with painful breast cancer prefer garments that hide body shape and are looser size clothes with sleeves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.9
• /
• pp.1479-1490
• /
• 2010

This study provides basic data for the development of jacket patterns which reflect designs corresponding to the body shape features and preferences of obese women in their 20s and 30s by understanding problems they may encounter in wearing a ready-made jacket by researching the reality of ready-made tailored jacket wearing and their design preferences. A survey was conducted by sampling 82 obese women (over $25kg/m^2$ BMI) between the ages of 20 to 39. The details of the survey consists of general information, interest rate and importance rate on clothes, reality of wearing and purchasing jackets, measurement fits per each part, and preferred designs. SPSS 14.0 was used to analyze the data. The results showed that 76.8% of obese women wore their jackets less than 5 times a month. Those in the 20s wore the jackets more frequently than those in the 30s. The reasons for not wearing jackets frequently included uncomfortableness in activities and unavailability of the correct size. A total of 55% of the total preferred the fitting to be relatively smaller than the body size or tightly fitting. Although in the past, there was a tendency to wear a loose fit to cover the body shape, currently even obese body shapes avoided the loose fit as the tight fit is the trend. In terms of the satisfaction rate for the measurements per each part of jackets, there was a low satisfaction rate for most of the items. For the circumference items such as waist length and chest size, people responded that they were too small and for the length of items such as the length of jacket and sleeve length, people responded that they were too long. This was because the readymade clothes brands increase the length of items and circumference items in uniform in the same intervals when producing large sizes. Both those in the 20s and the 30s preferred a tight fit. In terms of preferred fabric, a wool/spandex mix was most popular and then cotton/spandex. This shows that they prefer those fabrics which allow an excellent activity while maintaining the exterior well. In addition, they preferred black color with no patterns because they wanted their body size to look reduced and did not want to receive any attention.