• Title/Summary/Keyword: tidal channel

Search Result 268, Processing Time 0.028 seconds

Analysis on Topography and Exposure Duration of Siheung Tidal Flat Using Remote Sensing Techniques (위성영상 분석기술을 이용한 시흥갯벌의 지형 및 노출시간 분석)

  • Koo, Bon Joo;Kim, Minkyu
    • Ocean and Polar Research
    • /
    • v.35 no.4
    • /
    • pp.291-298
    • /
    • 2013
  • In order to investigate the topography and exposure duration of the Siheung tidal flat, tidal ranges and DEM constructed by remote sensing techniques were analyzed. A cross-sectional diagram of the intertidal area reveals that it is relatively flat in the upper zone and then abruptly plunges into the bottom of the main channel where elevations increase in an upstream direction. The waterline during the Highest Low Water (HLW) is drawn back to the bottom of the channel at the middle part of the tidal flat and is formed along the slant of the channel during the Lowest High Water (LHW). The intertidal zone is located between -410 cm and 510 cm in terms of elevation and its total area is $0.65km^2$. An area between the Highest High Water (HHW) and Lowest High Water (LHW), occupying about 80% of the total area, occupies $0.52km^2$ of total area and accounts for 56% of the exposure duration. The boundary of wetland protection area in the Siheung tidal flat did not exactly coincide with the intertidal regime and differs by more than 15%. This study, which precisely analyzed the tidal flat area, tidal environment, and topography, would be useful in making a conservation plan and in learning how to use a wetland protection area in a sustainable manner.

How Much Power can be Obtained from the Tides?

  • Garrett, Chris
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2006.11a
    • /
    • pp.74-79
    • /
    • 2006
  • General formula are presented for the maximum power available from the tidal head in a closed basin and from the tidal currents in a channel connecting two large bodies of water. In the latter case, the available energy cannot be estimated from the kinetic energy flux in the undisturbed state, but can be obtained from knowledge of the tidal head between the ends of the channel and the maximum volume flux in the undisturbed state. The results are supported by detailed calculations for Johnstone Strait, British Columbia, using a two-dimensional finite element model. The model also allows an extension to the case of multiple channels. More work is needed to allow for partial tidal fences which do not occupy the whole cross-section of a channel.

  • PDF

Theoretical Study on Assessment of Tidal Stream Resources (조류자원의 평가에 관한 이론적 연구)

  • Yang, Chang-Jo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.17 no.1
    • /
    • pp.23-28
    • /
    • 2011
  • This paper outlines extraction potential of tidal stream resources from the simplified channel in which flow is driven by a head difference between inlet and outlet. Energy extraction alters the flow within a simple channel, and extraction of 10% energy flux in a natural channel would give rise to a flow speed reduction of about 5.7%. If 20% of the undisturbed energy flux is extracted, the flow speed is reduced by 11.3%. The simple channel also suggests that extractable energy might be higher if flow speed reductions are considered acceptable.

Application of the Landsat TM/ETM+, KOMPSAT EOC, and IKONOS to Study the Sedimentary Environments in the Tidal Flats of Kanghwa and Hwang-Do, Korea

  • Ryu Joo-Hyung;Lee Yoon-Kyung;Yoo Hong-Rhyong;Park Chan-Hong
    • Proceedings of the KSRS Conference
    • /
    • 2004.10a
    • /
    • pp.140-143
    • /
    • 2004
  • The west coast of the Korean Peninsula is famous for its large tidal range (up to 9 m) and vast tidal flats. With comparison the sedimentary environments of open and close tidal flat using remote sensing, we select Kanghwa tidal flat and Hwang-Do tidal flat in Cheonsu Bay. Prior to surface sediment discrimination using remote sensing, sedimentary environments including intertidal OEM, hydraulic condition, and relationship between grain size and various tidal condition are investigated. Remote sensing has the potential to provide synoptic information of intertidal environments. The objectives of this study are: (i) to generate an intertidal digital elevation model (OEM) using the waterline method of Lansat TM/ETM+, (ii) to investigate the tidal channel distribution using texture analysis, and (iii) to analyze the relationship between surface grain size by using in-situ data and intertidal OEM and tidal channel density by using high-resolution satellite data such as IKONOS and Kompsat EOC. The results demonstrate that satellite remote sensing is an efficient and effective tool for a surface sediment discrimination and long term morphologic change estimation in tidal flats.

  • PDF

Critical Limits of Commercial Diving on the Construction of Tidal Current Power in Jangjuk Channel (장죽수로 조류발전건설시 작업특성에 따른 산업잠수 작업한계)

  • Kim, Won-Seok
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.25 no.3
    • /
    • pp.733-742
    • /
    • 2013
  • The Korea has significant tidal current energy resources, but it is so hard to work underwater for tidal turbine installation. Therefore commercial diving work is very important for tidal current generator. Also, Jangjuk channel is vary famous as proper area to generate tidal current energy. Nevertheless, no one is studied about characteristics of commercial diving works with installation of tidal current generator. The purpose of this study is to introduce commercial diving with work types and investigate critical limits of diving working under the conditions, which are working only to minutes at slack tide during the neap tide. As the results, work types are five as like mooring installation, OMAS(Offshore Maintenance Access System), support structure installation, cable and turbine installation. Here, the original construction period is expected about 4 months, but the construction take 18 months to complete. The cause of extends construction period is insufficiency of researching tidal current conditions at the site and ignorance of slack tide which need to secure diving working time. Total diving working times are 110th during 18 months, the highest percentage of diving times is turbine installation about 43.6 %, and cable, mooring installation and support structure construction are 27.3 %, 15.5 %, 13.6 %, respectively. On the basis of this study, estimation of times of commercial diving is possible with work types of tidal current power, and has a significance as basic data to determining construction period.

Tidal Front in the Main Tidal Channel of Kyunggi Bay, Eastern Yellow Sea

  • Lee, Heung-Jae;Lee, Seok;Cho, Cheol-Ho;Kim, Cheol-Ho
    • Journal of the korean society of oceanography
    • /
    • v.37 no.1
    • /
    • pp.10-19
    • /
    • 2002
  • The detailed structure of a tidal front and its ebb-to flood variation in the main tidal channel of the Kyunggi Bay in the mid-west coast of Korea were investigated by analyzing CTD data and drifter trajectories collected in late July 1999. A typical tidal front was formed in water about 60 m deep at the mouth of the channel. Isotherms and isohalines in the upper layer above the seasonal pycnocline in the offshore stratified zone inclined upward to the sea surface to form a surface front, while those in the lower layer declined to the bottom front. The location of the front is consistent with $100 S^3/cm^2$ of the mixing index H/U defined by Simpson and Hunter (1974), where H is the water depth and U is the amplitude of tidal current. The potential energy anomaly in the frontal zone varied at an ebb-to flood tidal cycle, showing a minimum at slack water after ebb but a maximum at slack water after flood. This ebb-to flood variation in potential energy anomaly is not accounted for by the mixing index. We conclude that on- and offshore displacement of the water column by tidal advection is responsible for the ebb-to-flood variation in the frontal zone.

Performance and Cavitation Analysis on Tidal Current Turbine for Low Water Level Channel

  • Chen, Chengcheng;Choi, Young-Do
    • The KSFM Journal of Fluid Machinery
    • /
    • v.17 no.5
    • /
    • pp.60-66
    • /
    • 2014
  • Most tidal current turbine designs are focused on medium and large scale for deep sea, less attention is paid in low water level channel, such as the region around the islands and costal sea. This study is to develop a horizontal axis tidal current turbine rotor blade which is applicable to low water level island region in southwest coastal region of Korea. In this study, the hydrofoil NACA63-415 and NACA63-817 are both adopted to analyze. The blade using NACA63-817 showed the higher maximum power coefficient and good performance at small TSR (Tip Speed Ratio), which gives the blade more advantages in operating at lower water level channel, where is characterized by the fast-flowing water. The cavitation pattern of hydrofoil is predicted by the CFD analysis and verified that the NACA63-817 is the appropriate hydrofoil in the test site of tidal current resource and the hydrofoil showed considerable performance in avoiding cavitation.

Water Mass Structure and Dissolved Oxygen Distribution in Chinhae Bay (진해만의 수괴구조와 용존산소 분포)

  • KIM Cha-kyum;LEE Pil-Yong
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.27 no.5
    • /
    • pp.572-582
    • /
    • 1994
  • To investigate water mass structure and DO(Dissolved Oxygen) distribution in Chinhae Bay, temperature, salinity and DO were observed in the bay in summer and winter from 1990 to 1993, and two-dimensional tidal current and parameter log($H/U^3$) were computed. Shallow water fronts in the bay were formed in summer in Kaduk channel and the central part of the bay having log($H/U^3$) values of $2.0{\sim}2.5$. Oxygen deficiency at the bottom layer in summer occurred in the western and northern part of the bay with weak tidal current, where the value of log($H/U^3$) was more than about 3.5 and $M_2$ tidal current was less than about 20 cm/s. DO concentration at the bottom layer of Kaduk channel and the central channel of the bay having the strong tidal current was more than about 3.5 mg/l. The isolines of DO concentration were nearly parallel to the isovelocity, and the concentrations correlated with the frontal location. The frontal location and DO distribution were influenced by tidal range, river inflow and meteorological conditions, and also correlated with bottom slope characteristics.

  • PDF

Characteristics of Sediments in the Kanghwa Tidal Flat on the west coast of Korea (한국 서해 강화 갯벌의 퇴적물 특성)

  • Woo, Han Jun;Bahk, Jang Jun;Lee, Yeon Gyu;Je, Jong Geel;Choi, Jae Ung
    • Journal of Wetlands Research
    • /
    • v.6 no.1
    • /
    • pp.167-178
    • /
    • 2004
  • The southern tidal flat of Kanghwa Island is one of the biggest flats on the west coast of Korea. Tide is typically a semidiurnal with maximum range of about 10m. The tidal flat receives large amount of sediments from Han River system. Surface sediments for sedimentary analyses were sampled at 83 stations in the study area in August 2003. The surface sediments consisted of five sedimentary facies. Generally, sandy mud sediments dominated in the southern tidal flat of Kanghwa Island, whereas sand sediments dominated in channel and subtidal zones of the western part of Kanghwa Island. The area of sandy mud sediment extended to eastward tidal flat compared to sedimentary facies in August 1997. Sedimentary facies analysis of three core sediments from the tidal flat to the south of the Kangwha Island revealed three sedimentary facies: trough-cross-bedded sand, laminated silt, and bioturbated silt. Distribution of the facies in the cores suggested that sedimentation rates has been generally high in the margin of main tidal channel, especially in the east of the Donggeum Island. Twelve-and-half-hour anchoring survey was carried out for measurements of hydrodynamic parameters at Yeomha channel near Choji Bridge(K1) and channel near Donggeum Island(K2) in June 2003. Residual flows indicated strong ebb-dominated tidal currents. Depth-integrated net suspended sediment loads for one tidal cycle were seaward movement with 309,217.9kg/m and 128,123.1kg/m at station K1 and K2, respectively. The higher value of net suspended sediment loads at station K1 suggested that lots of suspended sediments from Han River deposited in the eastern part of tidal flat.

  • PDF

Estimation of Tidal Residual Flow and Its Variability in Kyunggi Bay of Korea (경기만 조석 잔차류 산정 및 변동성)

  • Kim, Chang-S.;Lim, H.S.;Kim, Jin-Ah;Kim, Seon-Jeong;Park, K.S.;Jung, K.T.
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.22 no.6
    • /
    • pp.353-360
    • /
    • 2010
  • The Kyunggi Bay in mid-west of Korea is a relatively large estuarine system that connects the Han River system with Yellow Sea. Due to macro-tidal range of more than 8 m, the urban estuary shows deep tidal channels and wide tidal flats. Since last 30 years, the coastal development is undergoing, yielding noticeable change in environment. Particularly the tidal flat dynamics are generally accepted as being related with tidal residual flows in this area (Kim et al., 2009). We have estimated the annual variation and vertical structure of residual currents with one-year long observed flows in two major tidal channels of Kyunggi Bay. The moving average method and tidal current harmonic analysis yield nearly the same results on residual flow. The residual flow in Jangbong channel ranges from 20 cm/s in summer to 30 cm/s in winter. It is noticeable that the residual flow in Jangbong channel is flood dominant throughout the year, while the flow in Seokmo channel is ebb-dominant residual flow with current speed range of 20-40 cm/s. Due to the baroclinic response of relatively shallow estuary, significant reduction of energy in bottom layers have been observed, indicating the importance of residual circulation to the tidal flat behavior.