본 논문에서는 안드로이드 플랫폼과 같은 낮은 사양의 시스템에서 처리속도에 부담을 주지 않고 공간영역에서 워터마크의 삽입 및 검출 알고리즘을 제안하고자 한다. 워터마크는 사용자의 정보를 암호화하여 삽입하는 핑거프린트의 형태로 삽입되며 노출 위험을 피하기 위해 사용자 ID를 블록 암호화하여 의사 난수화하고 이를 토대로 워터마크의 삽입위치, 크기 및 삽입 프레임 번호에 변화를 주는 방법을 사용하였다. 또한 동영상의 특징상 많은 프레임이 존재하므로 이런 특징을 적극 활용하여 검출 결과를 안정화한 후 적분을 통하여 검출 가능성을 높였다. 본 연구에서 제시한 워터마크의 삽입 및 검출은 제한된 조건하에서도 높은 검출율을 얻을 수 있었다. 또한 검출 결과를 시각적으로 보여주기 위한 결과에서도 비교적 선명한 결과를 얻을 수 있었다. 상관계수 r 연산에 의한 결과도 움직임이 많은 경우 0.87, 중간의 경우 0.79, 움직임 적은 경우 0.84라는 높은 결과를 얻을 수 있어서 0.7 이상인 경우 확정적인 것을 참고하면 높은 검출 결과를 얻게 되었다. 워터마크 기호 영상 추출 단계에서 성공율 95.45%의 결과를 얻었으며 이 결과 영상에 상관계수 r 연산을 적용하면 99% 이상 검출 결과를 얻을 수 있었다. 향후 다양한 공격에 대비한 알고리즘의 보완을 통해 상품화의 단계를 지향하고 있으며 이를 통해 영상 관제 시스템과 지적 재산권 보호 시스템에 적용할 예정이다.
본 논문에서는 U-시차맵과 조감도를 이용한 스테레오 비전 기반의 장애물체 검출 및 차량 검증 방법을 제안한다. 먼저 최대 빈도 값을 이용하여 V-시차맵 상에서 도로 특징 정보를 추출하고, 추출된 도로 정보를 이용하여 대략적인 도로상의 장애물체 영역을 추출한다. 좀 더 정확한 장애물체 영역 추출을 위하여 U-시차맵을 생성하는데, 이때 시차값과 카메라 파라미터를 이용하여 계산된 문턱치를 이용하여 높이 제한된 U-시차맵을 생성함으로써, 일정한 높이의 장애물체만을 검출 할 수 있다. 그러나 검출된 장애물체 영역 내에는 여전히 다수의 장애물체와 배경이 존재하므로, 세그먼테이션 과정을 수행한다. 전 단계에서 추출된 장애물체 영역을 카메라 모델링과 파라미터를 이용하여 조감도 맵핑을 수행한다. 조감도는 시차맵과 카메라 정보를 기반으로 계산된 장애물체들의 위치를 평면상에 표시함으로써 장애물체들을 좀 더 쉽게 분리할 수 있다. 마지막으로 각각 분리된 장애물체들 별로 차량 특징 기반의 차량 검증 과정을 수행한다. 도로 접점 여부, 일정한 수평크기, 가로 세로 비율 및 텍스쳐 정보를 이용하여 최종적으로 도로상의 차량만을 검출한다. 그리고 실제 도로에서 획득한 영상에 제안한 알고리즘을 적용함으로써 장애물체 검출 및 차량 검증 성능을 검증한다.
귤응애 성충의 표본추출법을 개발하기 위하여 2개년(2001-2002년)동안 8월부터 11월까지 잎과 열매에 대해 각 조사일에 평균밀도를 조사하였다. 잎과 열매에서 귤응애 성충 밀도의 관계를 시기별로 비교하였으며, Taylor's power law (TPL)와 Iwao's patchiness regression (IPR)을 이용하여 분산지수를 비교하였다. 잎(X)과 열매(Y)에서 귤응애 성충 밀도의 관계는 ln(Y+l)=1.029 ln(X+l)($r^2$=0.80)의 직선적인 관계가 있었으며, 열매가 성숙될수록 잎보다 열매에서 귤응애 밀도가 높아지는 경향이었다. 잎과 열매의 표본조사에서 TPL이 IPR보다 평균-분산 관계를 더 잘 나타내었으며, TPL의 기울기와 절편은 두 표본단위간, 연도간에 차이가 없었다. 정착도 0.25일 때 요방제밀도 2.0, 2.5와 3.0에서의 의사결정을 위한 표본추출조사법을 개발하였으며, 조사에 필요한 최대조사나무수(고정표본크기에서 필요 나무수)는 각각 19, 16과 15주였으며, 이 때의 의사결정임 계값 $T_{critical}$은 각각 554,609와 659였다.,609와 659였다.
Objectives: Particulate contaminants, such as total and respirable dusts, can harm the health of farm workers via several routes. The principal aims of this field study were to determine the concentrations and emissions of particulate contaminants: total and respirable dusts, in the different types of swine houses used in Korea, and allow objective comparison between Korea and the other countries in terms of swine housing types. Methods: The swine houses investigated in this research were selected with respect to three criteria: the manure removal system, ventilation mode and growth stage of pigs. Measurements of total and respirable dust concentrations and emissions in the swine houses were carried out on 5 housing types at 15 different farm sites per housing type. The swine houses investigated were randomly selected from farms situated within the central districts in Korea: province of Kyung-gi, Chung-buk and Chung-nam. Results: The total and respirable dust concentrations in the swine houses averaged $1.88\;and\;0.64mg/m^3$, ranging from $0.53\;to\;4.37mg/m^3$ and from $0.18\;to\;1.68mg/m^3$, respectively. The highest concentrations of total and respirable dusts were found in the swine houses with deep-litter bed systems: $2.94mg/m^3\;and\;1.14 mg/m^3$, while the lowest concentrations were found in the naturally ventilated buildings with slats: $0.83mg/m^3\;and\;0.24mg/m^3$, respectively (p<0.05). All the swine houses investigated did not exceed the threshold limit values (TLVs) for total ($10mg/m^3$) and respirable ($2.5mg/m^3$) dusts. The mean emissions of total and respirable dusts, per pig (75 kg in terms of live weight) and area ($m^2$), from the swine houses were 97.33 and 9.55 mg/h/pig and $37.14\;and\;12.83mg/h/m^2$, respectively. The swine houses with deep-litter bed systems showed the highest emissions of total and respirable dusts (p<0.05). However, the emissions of total and respirable dusts from the other swine houses were not significantly different (p>0.05). Conclusion: The concentrations and emissions of total and respirable dusts were relatively higher in the swine houses managed with deep-litter bed systems and ventilated naturally of the different swine housing types tested. In further research, more farms than the number used in this research should be investigated, which will present objective and accurate data on the concentrations and emissions of total and respirable dusts in Korean swine houses. In addition, personal sampling should be performed to objectively assess the exposure level of farm workers to particulate contaminants.
본 연구에서는 광양만 유역 국가산업단지와 컨테이너 부두 유역의 입자크기별 도로축적퇴적물(Road-deposited sediments; RDS)과 해양퇴적물 내 중금속 오염현황 파악과 잠재적인 오염원으로써의 RDS의 영향을 연구하였다. RDS의 경우 아연(Zn)의 농도가 2,982 mg/kg으로 매우 높았으며, 크롬(Cr)>니켈(Ni)>납(Pb)>구리(Cu)>비소(As)>카드뮴(Cd)>수은(Hg)의 순이었다. RDS의 중금속 농도는 입자가 세립할수록 증가하였으며, 금속폐기물을 취급하는 산업시설 주변에서 상대적으로 높은 농도를 보였다. 125 ㎛ 미만의 입자에서 아연(Zn)이 가장 높은 오염도(very high enrichment)를 나타냈고, Cr, Cd, Pb은 심각한 수준의 오염도(significant enrichment)를 보였다. 한편, 해양퇴적물 내 중금속 농도는 대부분 국내 "주의 기준(threshold effect level, TEL)" 이하였으나, 2010년 이후 Zn의 평균농도가 30~40% 증가하였다. 연구지역 도로노면 내 Zn, Cd, Pb 등은 강우시 쉽게 비점오염의 형태로 유출가능한 125 ㎛ 미만이 전체의 54%를 차지하는 것으로 나타났다. 특히 아연(Zn)의 경우, 연구지역의 교통 뿐만 아니라 산업활동에 사용된 아연도금의 부식에 의한 영향을 크게 받는 것으로 판단된다. 중금속 농도가 높은 세립한 RDS는 바람, 차량이동에 의해 재비산되어 대기 뿐만 아니라 강우시 인근 환경에 크게 영향을 미칠 수 있기 때문에 주변 환경 및 생태계에 미치는 영향에 대한 추가적인 연구가 필요하다.
The principal aim of this field study was to determine the concentrations and emissions of gaseous contaminants such as ammonia and hydrogen sulfide in the different types of pig buildings in Korea and allow objective comparison between Korea and the other countries in terms of pig housing types. This field study was performed from May to June and from September to October in 2002. Pig buildings investigated in this research were selected in terms of three criteria; manure removal system, ventilation mode and growth stage of pig. Measurements of concentration and emission of ammonia and hydrogen sulfide in the pig buildings were done in 5 housing types and the visited farms were 15 sites per each housing type. Concentrations of ammonia and hydrogen sulfide were measured at three locations of the central alley in the pig building and emission rates of them were estimated by multiplying the average concentration($mg/m^3$) measured near the air outlet by the mean ventilation rate($m^3/h$) and expressed either per pig of liveweight 75kg(mg/h/pig) or per area($mg/h/m^2$). Concentrations of ammonia and hydrogen sulfide in the pig buildings were averaged to 7.5 ppm and 286.5 ppb and ranged from 0.8 to 21.4 ppm and from 45.8 to 1,235 ppb, respectively. The highest concentrations of ammonia and hydrogen sulfide were found in the mechanically ventilated buildings with slats; 12.1 ppm and 612.8 ppb, while the lowest concentrations of ammonia and hydrogen sulfide were found in the pig buildings with deep-litter bed system(2.2 ppm) and the naturally ventilated pig buildings with manure removal system by scraper(115.2 ppb), respectively(p<0.05). All the pig buildings were investigated not to exceed the threshold limit values(TLVs) of ammonia(25 ppm) and hydrogen sulfide(10 ppm). The mean emissions of ammonia and hydrogen sulfide per pig(75kg in terms of liveweight) and area($m^2$) from pig buildings were 250.2 mg/h/pig and 37.8 mg/h/pig and $336.3mg/h/m^2$ and $50.9mg/h/m^2$, respectively. The pig buildings with deep-litter bed system showed the lowest emissions of ammonia and hydrogen sulfide(p<0.05). However, the emissions of ammonia and hydrogen sulfide from the other pig buildings were not significantly different(p>0.05). Concentrations and emissions of ammonia and hydrogen sulfide were relatively higher in the pig buildings managed with deep-pit manure system with slats and mechanical ventilation mode than the different pig housing types. In order to prevent pig farm workers from adverse health effect caused by exposure to ammonia and hydrogen sulfide in pig buildings, they should wear the respirators during shift and be educated sustainably for the guideline related to occupational safety.
Journal of the Korean Data and Information Science Society
/
제24권3호
/
pp.523-532
/
2013
데이터 마이닝은 빅 데이터에 잠재되어 있는 지식이나 패턴을 찾아내는 기술이며, 대표적인 기법 중의 하나가 연관성 규칙 마이닝이다. 이 기법은 지지도, 신뢰도, 향상도 등의 연관성 평가 기준을 기반으로 하여 각 항목들 간의 관련성을 찾아내는 데 활용되고 있다. 연관성을 평가하기 위한 기준으로 여러 가지 흥미도 측도가 개발되어 있는데, 그 중에서도 신뢰도가 가장 많이 활용되고 있으나 연관성의 방향을 알 수가 없다는 단점을 가지고 있다. 이를 보완하기 위한 측도로 순수 신뢰도가 개발되었으나. 양의 신뢰도과 음의 신뢰도의 값이 동일한 경우에는 이 측도의 값이 같아지므로 정확한 연관성 규칙을 발견할 수 없게 된다. 이러한 단점을 보완하기 위해 기여 순수 신뢰도와 비교 신뢰도가 개발되었는데 이들은 이들 측도들이 취할 수 있는 값의 범위에 대한 문제를 제외하고는 흥미도 측도로서는 매우 바람직하다고 할 수 있으나 값의 범위에 대한 문제점이 존재한다. 이 문제를 해결하기 위해 본 논문에서는 기여 순수 신뢰도와 비교 신뢰도의 크기를 동시에 고려한 비교 기여 순수 신뢰도를 제안하였다. 또한 예제를 통하여 그 유용성을 알아본 결과, 비교 기여 순수 신뢰도는 그 부호에 의해 연관성 규칙의 방향을 파악할 수 있는 동시에 그 값의 범위가 [-1, +1]의 값을 가지므로 행태적 해석이 가능한 것으로 확인되었다.
인공신경망회로 목표 중의 하나는 최소한의 회로구성으로 구현가능함수를 가능한 많게 하는데 있다. 본 논문은 인공신경망회로의 가장 기본이 되는 하나의 입력노드와 하나의 출력노드, 그리고 입출력에 다단(multi-level)값을 갖는 단층(입출력 2 layer) 다단 코어넷(CoreNet)을 제안하고 그 처리 용량을 구하였고, 무게값 공간에서 구현 가능한 함수와 각 무게값 좌표(${\omega}$,${\theta}$)를 계산으로 구하여 한 함수의 구현 가능 여부를 알 수 있게 하였다. 또 입력 단계(level)값 설정 방법으로 cot(${\sqrt{x}}$)을 제안하였다. 제안된 p단 입력과 q단 출력을 갖는 코어넷의 처리용량(구현 가능한 함수의 수)은 $a_{p,q}={\frac{1}{2}}p(p-1)q^2-{\frac{1}{2}}(p-2)(3p-1)q+(p-1)(p-2)$임을 유도 증명하였다. 시뮬레이션으로 5단(level) 입력 값과, 6단 출력 값을 갖는 1(5)-1(6) 모델을 분석한 결과, cot(${\sqrt{x}}$) 입력 레벨링법에서 총 246가지의 함수가 구현가능 함을 보였다. 이 모델의 시뮬레이션 결과에서는 최대 219개의 함수가 수렴(구현 가능)하였고, 구현가능 함수 중에서 나머지 수렴되지 않은 27개의 함수는 무게값 공간에서 무게값 좌표를 계산하여 구현 가능함을 보였다. 이는 앞에서 제시된 코어넷 처리용량 $a_{5,6}(=246)$에 의한 계산 값과 일치하였다. 무게값 공간에서, 구현 가능한 함수가 차지하는 영역의 함수번호 매김 방법도 제시하여 구현 가능함수의 번호도 알 수 있도록 하였다.
In order to evaluate the psychosomatic health status of metal manufacturing industries workers and their working environments, the present study was conducted from March 1, 1981 to the end of September 1981. The data was obtained from the samples of metal manufacturing industries in Kyung-In Area and their 1, 162 employees. In addition, the 803 urban residents including students, office clerks, and general publics were sampled as control groups to compare with factory employees in psychosomatic analysis. The basic tool employed in the present study was the Todai Health Index (THI) which modified CMI and was developed by Tokyo University Research Team of Japan. The results of the present study were summarized as follows: 1. Working environments of the factories 1) The data shows that fabrication shop produced the highest noise level ranging from 91 to 96 dB (A) and iron and steel shop had the lowest noise level ranging from 81 to 86 dB (A). 2) Dust concentration was the highest in iron foundry shop ($3.8 mg/m^3$) and the lowest in fabrication shop ($1.2 mg/m^3$). 3) WBGT above threshold limit values (T.L.V.) was noted in steel shop (38$\circ$C) and iron foundry shop (34$\circ$C) 4) The concentration of Sulfur dioxide ($SO_2$)was 30.5ppm at steel shop and 12.0ppm at iron foundry shop. 5) The concentration of carbon monoxide (CO) was 140.0ppm at steel shop and 110.5ppm at iron foundry shop. 6) The atmospheric lead concentration was $0.49 mg/m^3$ at soldering shop. 2. The responses of psychosomatic complaints were much higher in steel shops group than in other manu-facturing group, except the response of aggressiveness. 3. The responses of psychosomatic complaints were much higher in industrial workers than in urban residents, except the responses of depression and aggressiveness (p < 0.01 ). 4. The psychosomatic symptoms which industrial workers and urban residents complained frequently were nervousness. agressiveness and lie scale in order. 5. The responses of psychosomatic complaints by sex were much higher in female group than in male group, except the response of aggressiveness. 6. The responses of psychosomatic complaints by age were that both the female and male group showed an increasing tendency in the all items, except the response of depression as age was increasing. 7. The responses of psychosomatic complaints by the length of services were that both the female and male group showed a tendency of increasing in physical symptoms as work years increased. 8. The responses of psychosomatic complaints were higher in unmarried group in the score of nervousness, aggressiveness, mental irritability and irregular life.
Objective: Quantitative polymerase chain reaction (qPCR) has been extensively used in the field of mesenchymal stem cell (MSC) research to elucidate their characteristics and clinical potential by normalization of target genes against reference genes (RGs), which are believed to be stably expressed irrespective of various experimental conditions. However, the expression of RGs is also variable depending on the experimental conditions, which may lead to false or contradictory conclusions upon normalization. Due to the current lack of information for a clear list of stable RGs in bovine MSCs, we conducted this study to identify suitable RGs in bovine MSCs. Methods: The cycle threshold values of ten traditionally used RGs (18S ribosomal RNA [18S], beta-2-microglobulin [B2M], H2A histone family, member Z [H2A], peptidylprolyl isomerase A [PPIA], ribosomal protein 4 [RPL4], succinate dehydrogenase complex, subunit A [SDHA], beta actin [ACTB], glyceraldehyde-3-phosphate dehydrogenase [GAPDH], TATA box binding protein [TBP], and hypoxanthine phosphoribosyltrasnfrase1 [HPRT1]) in bovine bone marrow-derived MSCs (bBMMSCs) were validated for their stabilities using three types of RG evaluation algorithms (geNorm, Normfinder, and Bestkeeper). The effect of validated RGs was then verified by normalization of lineage-specific genes (fatty acid binding protein 4 [FABP4] and osteonectin [ON]) expressions during differentiations of bBMMSCs or POU class 5 homeobox 1 (OCT4) expression between bBMMSCs and dermal skins. Results: Based on the results obtained for the three most stable RGs from geNorm (TBP, RPL4, and H2A), Normfinder (TBP, RPL4, and SDHA), and Bestkeeper (TBP, RPL4, and SDHA), it was comprehensively determined that TBP and RPL4 were the most stable RGs in bBMMSCs. However, traditional RGs were suggested to be the least stable (18S) or moderately stable (GAPDH and ACTB) in bBMMSCs. Normalization of FABP4 or ON against TBP, RPL4, and 18S presented significant differences during differentiation of bBMMSCs. However, although significantly low expression of OCT4 was detected in dermal skins compared to that in bBMMSCs when TBP and RPL4 were used in normalization, normalization against 18S exhibited no significance. Conclusion: This study proposes that TBP and RPL4 were suitable as stable RGs for qPCR study in bovine MSCs.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.