• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(D)
• /
• pp.360-365
• /
• 2010

In this paper, we present a distributed algorithm for detecting dynamic event regions in wireless sensor network with the consideration on energy saving. Our model is that the sensing field is monitored by a large number of randomly distributed sensors with low-power battery and limited functionality, and that the event region is dynamic with motion or changing the shape. At any time that the event happens, we need some sensors awake to detect it and to wake up its k-hop neighbors to detect further events. Scheduling for the network to save the total power-cost or to maximize the monitoring time has been studied extensively. Our scheme is that some predetermined sensors, called critical sensors are awake all the time and when the event is detected by a critical sensor the sensor broadcasts to the neighbors to check their sensing area. Then the neighbors check their area and decide whether they wake up or remain in sleeping mode with certain criteria. Our algorithm uses only 2 bit of information in communication between sensors, thus the total communication cost is low, and the speed of detecting all event region is high. We adapt two kinds of measure for the wake-up decision. With suitable threshold values, our algorithm can be applied for many applications and for the trade-off between energy saving and the efficiency of event detection.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.62-70
• /
• 2000

본 논문에서는 지능형 차량에서 사용되는 레이더 센서 사이의 상호 간섭 억제 방법을 제안한다. 이 연구는 표준화된 펄스형 레이더에서 동기형 간섭 신호의 억제 방안에 관한 것이다. 레이더 펄스의 방사는 ON-OFF 제어되며, OFF 구간에서 수신된 간섭 신호는 각 레이진 별로 분석되어 저장되며 이를 이용하여 ON 구간에서의 거짓 반사파의 위치를 예측하며, 이로써 ON 구간에서의 동기형 간섭 신호를 제거한다. I-Q 변복조 방식의 레이더 시스템에서, Rayleigh 분포와 Rician 분포의 잡음에서의 오경보 확률과 미탐지 확률을 유도하였다. 펄스 신호 유무의 판별 시의 임계값을 적응적으로 조절함으로써 오경보 확률은 감소시키고 미탐지 확률의 저하를 억제하는 방법을 제시하였으며, 시뮬레이션 결과 오경보 확률은 최고 10\sup 4\배 감소하였고 미탐지 확률의 저하는 무시할 정도였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2004년도 정기총회 및 학술대회
• /
• pp.281-284
• /
• 2004

This paper described an Enhanced-xVSB system for improving mobile/pedestrian reception performance to the ATSC DTV 8-VSB transmission standard. E-xVSB system can transmit a mixture of normal (8-VSB) stream and enhanced (robust) stream. The robust stream has a higher threshold of visibility (TOV) compared to the standard stream, and legacy receivers ignore the robust packets. Thus, Enhanced-xVSB system is fully backward compatible with a current ATSC standard. for mobile and portable reception support, E-xVSB system adopts a reduced constellation method as well as enhanced trellis-coded modulation scheme. E-xVSB system supports a variety of enhanced modulation schemes: Pseudo-2VSB, Enhanced-4VSB, modified Enhanced-8VSB and Hybrid-VSB. Proposed E-xVSB system performs well under serious dynamic multipath reception environment.

• 인터넷정보학회논문지
• /
• 제2권2호
• /
• pp.65-70
• /
• 2001

본 논문에서는 IP 망에서의 폭주회피를 위한 수정된 RED 알고리즘을 제안한다. RED는 평균 큐 크기를 계산하여 초기 폭주를 탐지하지만, 이를 무작위로 선택된 소스에 통보하여 패킷을 드롭시키기 때문에 글로벌 동기화 또는 공정성 문제를 유발한다. 또한 최적의 평균 큐 크기를 얻기 위해서는 네트워크 트래픽 특성이 파악되어야 한다. 수정된 RED 알고리즘은 평균 큐 크기가 최소 임계치를 초과하면 연결의 상태를 이용하여 각 소스의 패킷을 드롭시킨다. 이는 큐에서 버스트를 허용하면서 평균 큐 크기를 낮게 유지할 수 있기 때문에 망의 성능을 향상시킬 수 있다. 제안된 알고리즘은 goodput, 네트워크 이용률, 공정성의 평가인자를 이용하여 기존의 기법인 DT, RED와 비교 분석을 수행하였으며, 제안된 기법의 타당성을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4567-4587
• /
• 2017

With the growth of the Internet and the extensive applications of image editing software, it has become easier to manipulate digital images without leaving obvious traces. Copy-move is one of the most common techniques for image forgery. Image blind forensics is an effective technique for detecting tampered images. This paper proposes an improved copy-move forgery detection method based on the discrete cosine transform (DCT). The quantized DCT coefficients, which are feature representations of image blocks, are truncated using a truncation factor to reduce the feature dimensions. A method for judging whether two image blocks are similar is proposed to improve the accuracy of similarity judgments. The main transfer vectors whose frequencies exceed a threshold are found to locate the copied and pasted regions in forged images. Several experiments are conducted to test the practicability of the proposed algorithm using images from copy-move databases and to evaluate its robustness against post-processing methods such as additive white Gaussian noise (AWGN), Gaussian blurring, and JPEG compression. The results of experiments show that the proposed scheme effectively detects both copied region and pasted region of forged images and that it is robust to the post-processing methods mentioned above.

• Journal of Communications and Networks
• /
• 제4권2호
• /
• pp.148-157
• /
• 2002

This paper investigates schemes to improve TCP performance in multipath forwarding networks. In multipath routing, packets to the same destination are sent to multiple next-hops in either packet-level or flow-level forwarding mode. Effective bandwidth is increased since we can utilize unused capacity of multiple paths to the destination. In packet-level multipath forwarding networks, TCP performance may not be enhanced due to frequent out-of-order segment arrivals at the receiver because of different delays among paths. To overcome this problem, we propose simple TCP modifications. At the sender, the fast retransmission threshold is adjusted taking the number of paths into consideration. At the receiver, the delayed acknowledgment scheme is modified such that an acknowledgment for an out-of-order segment arrival is delayed in the same way for the in-order one. The number of unnecessary retransmissions and congestion window reductions is diminished, which is verified by extensive simulations. In flow-level multipath forwarding networks, hashing is used at routers to select outgoing link of a packet. Here, we show by simulations that TCP performance is increased in proportion to the number of paths regardless of delay differences.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.262-263
• /
• 2011

Flexible electronics, a future technology of electronics, require a low cost integrated circuit that can be built on various types of the flexible substrates. As a potential candidate for this application, a single walled carbon nanotube network is studied as an active device with a scheme of thin film transistor. Transistors are formed on a plastic foil by the Roll-to-Roll (R2R) and the Roll-to-Device (R2D) printing method. For both printing methods, electrical transports for the transistors are presented with the temperature dependence of threshold voltage (V_Th) and mobility from the measured transfer curves at temperatures ranging from 10 K to 300 K. It is observed that ${\mu}=0.044cm^2/V{\cdot}sec$ and V_Th=7.28V for R2R and ${\mu}=0.025cm^2/V{\cdot}sec$ and V_Th=3.10V for R2D, both for the temperature at 300K. Temperature dependence of mobility and V_Th is observed. However for R2R, the temperature dependence of V_Th is constant. It is the difference between, R2R and R2D.

• Current Optics and Photonics
• /
• 제2권4호
• /
• pp.356-360
• /
• 2018

We demonstrate continuous-wave operation of an all-fiber thulium-holmium codoped laser operating at a wavelength of 1706.3 nm. To realize laser operation in the short-wavelength region of the emission-band edge of thulium in silica fiber, we employ fiber Bragg gratings having resonant reflection at a wavelength around 1700 nm as a wavelength-selective mirror in an all-fiber cavity scheme. We first examine the performance of the laser by adjusting the central wavelength of the in-band pump source. Although a pump source possessing a longer wavelength is observed to provide reduced laser threshold power and increased slope efficiency, because of the characteristics of spectral response in the gain fiber, we find that the optimal pump wavelength is 1565 nm to obtain maximum laser output power for a given system. We further explore the properties of the laser by varying the fiber gain length from 1 m to 1.4 m, for the purpose of power scaling. It is revealed that the laser shows optimal performance in terms of output power and slope efficiency at a gain length of 1.3 m, where we obtain a maximum output power of 249 mW for an applied pump power of 2.1 W. A maximum slope efficiency is also estimated to be 23% under these conditions.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권11호
• /
• pp.1285-1295
• /
• 1999

본 논문은 방대한 크기의 볼륨 데이타를 효율적으로 렌더링하기 위한 셀 기반 웨이브릿 압축 방법을 제시한다. 이 방법은 볼륨을 작은 크기의 셀로 나누고, 셀 단위로 웨이브릿 변환을 한 다음 복원 순서에 따른 런-길이(run-length) 인코딩을 수행하여 높은 압축율과 빠른 복원을 제공한다. 또한 최근 복원 정보를 캐쉬 자료 구조에 효율적으로 저장하여 복원 시간을 단축시키고, 에러 임계치의 정규화로 비정규화된 웨이브릿 압축보다 빠른 속도로 정규화된 압축과 같은 고화질의 이미지를 생성하였다. 본 연구의 성능을 평가하기 위하여 {{}} 해상도의 볼륨 데이타를 압축하여 쉬어-？ 분해(shear-warp factorization) 알고리즘에 적용한 결과, 손상이 거의 없는 상태로 약 27:1의 압축율이 얻어졌고, 약 3초의 렌더링 시간이 걸렸다.Abstract This paper presents an efficient cell-based wavelet compression method of large volume data. Volume data is divided into individual cell of {{}} voxels, and then wavelet transform is applied to each cell. The transformed cell is run-length encoded according to the reconstruction order resulting in a fairly good compression ratio and fast reconstruction. A cache structure is used to speed up the process of reconstruction and a threshold normalization scheme is presented to produce a higher quality rendered image. We have combined our compression method with shear-warp factorization, which is an accelerated volume rendering algorithm. Experimental results show the space requirement to be about 27:1 and the rendering time to be about 3 seconds for {{}} data sets while preserving the quality of an image as like as using original data.

• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.73-76
• /
• 2015

본 논문에서는 인지 통신의 스펙트럼 감지 기법에 에너지 하베스팅 기법을 적용하여 2차 송신단의 전력 소모없이 스펙트럼을 감지할 수 있을 뿐만 아니라 전력을 저장할 수 있는 방안을 제안하였다. 에너지 하베스팅 방법을 통해 수집된 전력과 임계값을 비교하여 1차 네트워크의 스펙트럼 사용 유무를 판단한다. 2차 송신단이 메시지를 전송하려는 경우, 1차 네트워크가 사용 중이라면 주파수를 변경하여 스펙트럼의 사용 유무를 판단하게 된다. 또한 전송하려는 메시지를 가지지 않는 경우, 지속적으로 전력을 수집하게 된다. 따라서 2차 네트워크의 지속적인 스펙트럼 감지로 인한 전력 낭비를 제거할 수 있으므로 인지 기술의 활용도 및 효율성을 증가시킬 수 있다.