• Advances in aircraft and spacecraft science
• /
• 제11권2호
• /
• pp.177-194
• /
• 2024

The objective of this paper is to compute entire flow field over Apollo-II, Aerospace Reentry Demonstrator (ARD), Orbital Experiment (OREX) with sharp shoulder and rounded shape shoulder and Space Recovery Experiment (SRE) at different flare-cone half-angle of 20° and 35°. This paper addresses numerical solutions of the compressible three-dimensional Euler equations on hexahedral meshes for a freestream Mach 6 and at an angle of incidence 5°. Furthermore, spatial discretization is accomplished by a cell centred finite volume formulation solution and advanced in time by an explicit multi-stage Runge-Kutta method. The flow field characteristics, distribution of surface pressure coefficient and Mach number on fore-body and aft-body are presented as a function of the geometrical parameters of many reentry capsules. The surface pressure variation is numerically integrated to obtain the aerodynamic drag and compared well with impact theory. The present numerical study has observed the significant dependence of the blunt body and the aft-body geometry of the vehicle and can be used to study atmospheric conditions during re-entry trajectory. The numerical analysis reveals the significant influence of capsule geometry on the flow characteristics of the mechanism of upstream and structure of the flow near the wake region and aerodynamic drag coefficient.

• 한국항공우주학회지
• /
• 제49권2호
• /
• pp.107-120
• /
• 2021

전기동력 분산추진 비행체는 다수의 프로펠러로 인하여 복잡한 프로펠러 후류 유동 및 기체와의 상호간섭이 발생한다. 이에 따라 초기설계 단계에서는 다양한 형상과 비행 조건에 대하여 프로펠러 구동 효과를 반영한 신속 공력 및 하중 해석이 요구된다. 본 연구에서는 프로펠러 효과를 고려할 수 있는 패널 기반의 효율적인 공력해석 기법을 개발, 검증하였다. Actuator Disk Theory(ADT)에 기반하여 프로펠러 후류 영역의 유도 속도장을 계산하고, 이를 3차원 정상 용출-중첩 패널기법의 비행체 표면 경계조건에 반영하였다. 한국항공우주연구원의 Quad Tilt Propeller(QTP) 비행체 단독 프로펠러와 선행 실험 연구의 프로펠러-날개 형상을 벤치마크 문제로 선정하여 해석을 수행하였다. Actuator 기법 기반의 전산유체역학(CFD) 결과와의 비교를 통해 프로펠러의 후류 속도장과 프로펠러 구동에 따른 날개의 공력하중 분포 변화를 검증하였다. 자율비행 개인용 항공기(Optional Piloted PAV, OPPAV)와 QTP 공력해석에 기법을 적용하고, CFD와의 해석 소요 시간 및 결과 비교, 분석을 통해 기법의 실용성과 타당성을 확인하였다.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.15-20
• /
• 2018

PURPOSES : The purpose of this study is to analyze the magnitude of shoving of asphalt pavement by junction type between airport concrete and asphalt pavements, and to suggest a junction type to reduce shoving. METHODS : The actual pavement junction of a domestic airport, which is called airport "A" was modified by placing the bottom of the buried slab on the top surface of the subbase. A finite element model was developed that simulated three junction types: a standard section of junction proposed by the FAA (Federal Aviation Administration), an actual section of junction from airport "A" and a modified section of junction from airport "A". The vertical displacement of the asphalt surface caused by the horizontal displacement of the concrete pavement was investigated in the three types of junction. RESULTS : A vertical displacement of approximately 13 mm occurred for the FAA standard section under horizontal pushing of 100 mm, and a vertical displacement of approximately 55 mm occurred for the actual section of airport "A" under the same level of pushing. On the other hand, for the modified section from airport "A" a vertical displacement of approximately 17 mm occurred under the same level of pushing, which is slightly larger than the vertical displacement of the FAA standard section. CONCLUSIONS : It was confirmed that shoving of the asphalt pavement at the junction could be reduced by placing the bottom of the buried slab on the top surface of the subbase. It was also determined that the junction type suggested in this study was more advantageous than the FAA standard section because it resists faulting by the buried slab that is connected to the concrete pavement. Faulting of the junctions caused by aircraft loading will be compared by performing finite element analysis in the following study.

• Structural Engineering and Mechanics
• /
• 제13권1호
• /
• pp.103-116
• /
• 2002

A solution based on the linear three-dimensional theory of elasticity is developed for vibration and elastostatic problems of hollow toroids. The theory is developed for transversely isotropic toroids of arbitrary thickness, and has the potential to validate some vehicle and aircraft tire models in the linear range. In the semi-analytical method that is adopted Fourier series are written in the circumferential direction, forming a set of two-dimensional problems. These problems are solved using the differential quadrature method. A commercial finite element program is used to determine alternative solutions. For validation both problems of vibration and elastostatics are considered. Finally results are determined for local surface loading problems, and conclusions are drawn.

• Advances in aircraft and spacecraft science
• /
• 제2권2호
• /
• pp.183-198
• /
• 2015

Scramjets are a class of hypersonic airbreathing engine that are associated with realizing the technology required for economical, reliable access-to-space and high-speed atmospheric transport. After-burning augments the thrust produced by the scramjet nozzle and creates a more robust nozzle design. This paper presents a numerical study of three parameters and the effect that they have on thrust augmentation. These parameters include the injection pressure, injection angle and streamwise injection position. It is shown that significant levels of thrust augmentation are produced based upon contributions from increased pressure, mass flow and energy in the nozzle. Further understanding of the phenomenon by which thrust augmentation is being produced is provided in the form of a force contribution breakdown, analysis of the nozzle flowfields and finally the analysis of the surface pressure and shear stress distributions acting upon the nozzle wall.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.247-265
• /
• 2010

Multi-objective design exploration (MODE) and its applications are reviewed as an attempt to utilize numerical simulation in aerospace engineering design. MODE reveals the structure of the design space based on trade-off information. A self-organizing map (SOM) is incorporated into MODE as a visual data mining tool for the design space. SOM divides the design space into clusters with specific design features. This article reviews existing visual data mining techniques applied to engineering problems. Then, we discuss three applications of MODE: multidisciplinary design optimization for a regional-jet wing, silent supersonic technology demonstrator and centrifugal diffusers.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.642-645
• /
• 2007

Mounted in aircraft, LiDAR (Light Detection And Ranging) technology uses pulses of light to collect data about the terrain below. The main objective of this study was to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for estimating tree crown diameter by measuring individual trees identifiable on the three dimensional LiDAR surface. In addition, this study can be quantitative analysis of individual tree through the canopy parameter.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.15-23
• /
• 2004

The present study is aimed to achieve dynamic visualization from the in-house 3-D stereoscopic PIV to represent quantitative flow information such as time-resolved 3-D velocity distribution, vorticity, turbulent intensity or Reynolds stresses and so on. One of the application of the present study is Leading edge extension(LEX) flow appearing on modern delta wing aircraft. The other is mixing flow in stirring tank used in industry field. LEX in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present method resolves also the complicated flow patterns of two type impellers rotating in stirring vessel. Flow quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing visualization. And it makes the easy understanding of the unsteady flow characteristics of the typical industrial mixers.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.623-626
• /
• 2015

본 연구에서는 CFD 해석 프로그램 EDISON_CFD를 통하여 2차 세계 대전에 소련에서 제작한 복엽기 AN-2의 기체를 기본 모델로 하여 설제 기체에 사용된 TSAGI P-II-14 airfoil를 이용, 기본 모델의 상단 주익과 미익은 고정하고 하단 주 날개의 위치를 변화시켜 공력특성을 분석하였다. 익형의 평행배치의 경우 기본모델에 비해 양력은 적은 크기로 증가하나 항력이 급격히 증가하여 가장 양항비가 낮은 비효율적인 공력 해석 결과를 보였고 복염기 하단 주익의 돌출은 상단 주익의 돌출에 비해 미세한 양력 감소와 항력 증가를 보여 양항비가 감소하는 현상을 보였다. 상, 하단 주익의 상하 간격이 커질수록 양력은 중가, 항력은 감소하며 간격이 작아질수록 양력의 감소와 항력의 증가를 보였다. 본 연구 해석 결과에 따라 순항조건에서의 익형은 상,하 주익간 수직 간격을 넓게 배치하는 것이 가장 효율적으로 볼 수 있다.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.457-471
• /
• 2023

The paper evaluates the aerodynamic coefficients on a blunt-nose re-entry capsule with a conical cross-section followed by a cone-flare body. A computer code is developed to solve three-dimensional compressible inviscid equationsfor flow over a Space Recovery Experiment (SRE) configuration at different flare-cone half-angle at Mach 6 and angle of attack up to 5°, at 1° interval. The surface pressure variation is numerically integrated to obtain the aerodynamic forces and pitching moment. The numerical analysis reveals the influence of flare-cone geometry on the flow characteristics and aerodynamic coefficients. The numerical results agree with wind tunnel results. Increase of cone-flare angle from 25° to 35° results in increase of normal force slope, axial forebody drag, base drag and location of centre of pressure by 62.5%, 56.2% and 33.13%, respectively, from the basic configuration ofthe SRE of 25°.