• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.376-384
• /
• 2018

본 연구에서는 투과면을 이용하는 음향상사법으로 제자리 비행하는 UH-1H 로터 블레이드 주위의 원방 소음을 예측하였다. 두께 소음과 하중 소음, 그리고 충격파 및 끝단 후류 등에 의해 발생하는 유동 소음을 예측하기 위해 블레이드 표면을 포함하는 투과면을 구성하였다. 3차원 압축성 Euler 방정식 및 Navier-Stokes 방정식을 적용하여 공력 해석을 수행하고 비교하였다. 투과면의 위치에 따라 High Speed Impulsive 소음을 예측 및 검증하였다. 블레이드 끝단에서 발생하는 충격파에 의한 소음원이 지배적인 요소임을 확인하였으며, 충격파를 온전히 포함하도록 투과면을 구성하는 것이 중요함을 보였다.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.41-48
• /
• 2013

Ice accretion on the solid surface is an importance factor in assessing the performance of aircraft and wind turbine blade. Changes in the external shape due to ice accretion can greatly deteriorate the aerodynamic performance. In this study, a three-dimensional upwind-type second-order positivity-preserving finite volume CFD scheme based on the unstructured mesh topology is developed to simulate two-phase flow in atmospheric icing condition. The code is then validated by comparing with NASA IRT experimental data on the sphere. The present results of the collection efficiency are found to be in close agreement with experimental data and show improvement near the stagnation region.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1394-1405
• /
• 2022

The importance of ensuring the inherent safety and security has been more emphasized in recent years to demonstrate the integrity of nuclear facilities under external human-induced events (e.g. aircraft crashes). This work suggests a simulation methodology to effectively evaluate the impact of a commercial aircraft engine onto a dry storage facility. A full-scale engine model was developed and verified by Riera force-time history analysis. A reinforced concrete (RC) structure of a dry storage facility was also developed and material behavior of concrete was incorporated using three constitutive models namely: Continuous Surface Cap, Winfrith, and Karagozian & Case for comparison. Strain-based erosion limits for concrete were suitably defined and the local responses were then compared and analyzed with empirical formulas according to variations in impact velocity. The proposed methodology reasonably predicted such local damage modes of RC structure from the engine missile, and the analysis results agreed well with the calculations of empirical formulas. This research is expected to be helpful in reviewing the dry storage facility design and in the probabilistic risk assessment considering diverse impact scenarios.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.325-331
• /
• 2017

Purpose: There is active research that improves both reliability and fatigue life of structures which widely used in the aerospace fields of defense industry. The effects of three parameters (pressure, peening time, nozzle distance) on Almen intensity and coverage will be investigated by using the experimental and analyzed data. Methods: we employed a Box-Behnken design. Additionally, to verify the validity of the optimal condition obtained from experimental results, metallurgical analyses of the shot-peened aerospace part were conducted with respect to surface morphology, residual stress. Results: Optimal shot peening condition is determined as (distance, pressure, time) by optimizing simultaneously the two responses of intensity and coverage. At the optimal peening condition the prediction interval for Almen intensity is well within the required range. And, the validity of the condition was checked by using the real aerospace aluminum alloy plate. Conclusion: Shot peening introduces significant levels of compressive residual stress and induces improves both reliability and fatigue life of structures.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.671-679
• /
• 2008

The effect of Pre-cooled Turbojet Engine installation and nozzle exhaust jet on Hypersonic Turbojet EXperimental aircraft(HYTEX aircraft) were investigated by three-dimensional numerical analyses to obtain aerodynamic characteristics of the aircraft during its in-flight condition. First, simulations of wind tunnel experiment using small scale model of the aircraft with and without the rectangular duct reproducing engine was performed at M=5.1 condition in order to validate the calculation code. Here, good agreements with experimental data were obtained regarding centerline wall pressures on the aircraft and aerodynamic coefficients of forces and moments acting on the aircraft. Next, full scale integrated analysis of the aircraft and the engine were conducted for flight Mach numbers of M=5.0, 4.0, 3.5, 3.0, and 2.0. Increasing the angle of attack $\alpha$ of the aircraft in M=5.0 flight increased the mass flow rate of the air captured at the intake due to pre-compression effect of the nose shockwave, also increasing the thrust obtained at the engine plug nozzle. Sufficient thrust for acceleration were obtained at $\alpha=3$ and 5 degrees. Increase of flight Mach number at $\alpha=0$ degrees resulted in decrease of mass flow rate captured at the engine intake, and thus decrease in thrust at the nozzle. The thrust was sufficient for acceleration at M=3.5 and lower cases. Lift force on the aircraft was increased by the integration of engine on the aircraft for all varying angles of attack or flight Mach numbers. However, the slope of lift increase when increasing flight Mach number showed decrease as flight Mach number reach to M=5.0, due to the separation shockwave at the upper surface of the aircraft. Pitch moment of the aircraft was not affected by the installation of the engines for all angles of attack at M=5.0 condition. In low Mach number cases at $\alpha=0$ degrees, installation of the engines increased the pitch moment compared to no engine configuration. Installation of the engines increased the frictional drag on the aircraft, and its percentage to the total drag ranged between 30-50% for varying angle of attack in M=5.0 flight.

• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.47-54
• /
• 2011

A rotating propeller of turboprop aircraft gives much effect on the aerodynamic characteristics of wing such as lift, moment and stall. Specially propeller effect on the wing surface is much more dominant when aircrafts are in landing or take-off conditions. In the present paper, three dimensional Navier-Stokes simulations for the interaction of propeller and wing were carried out for medium sized turboprop aircraft. For rotating propeller, unsteady sliding mesh method was used to simulate a relative motion between moving and static bodies. For the power effect analysis in landing and take off configurations, double slotted flap was also considered and the aerodynamic characteristics were investigated. It was shown that the propeller slipstream enhanced the lift slope including maximum lift by eliminating local flow separation region and this enhancement was more dominant with high lift device.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.52-59
• /
• 2021

Titanium alloy (Ti-alloy) is widely used as a material for core parts of aircraft structures and engines that require both lightweight and heat-resistant properties owing to their high specific stiffness. Most parts used in aircraft have I-, L-, and H-shaped thin-walled structures for weight reduction. It is difficult to machine thin-walled structures owing to vibrations and deformations during machining. In particular, cutting tool damage occurs in the corners of thin-walled structures owing to the rapid increase in cutting force and vibration, and machining quality deteriorates because of deep tool marks on machined surfaces. In this study, milling experiments were performed to derive an effective method for machining a L-shaped thin-walled structure with Ti-alloy (Ti-6Al-4V). Three types of machining experiment were performed. The surface quality, tool wear, cutting force, and vibration were analyzed comprehensively, and an effective machining method in terms of tool life and machining quality was derived.

• Strategy21
• /
• 통권42호
• /
• pp.196-223
• /
• 2017

The aim of this paper is to analyze China's naval strengthening and threat reflected in submarines, aircraft, destroyers and missile capabilities and US Navy's counter-forces. China is strengthening its naval forces in accordance with its three-step naval force build-up plan, and the introduction of Russian destroyers and submarines is a foothold for China's naval enforcement. The Chinese Navy also converted the concept of the First-Second Island Chain Defense, which it had already maintained, to the concept of maritime layer defense. Currently, the Chinese Navy maintains the concept of a Three-Maritime Layer Defense which includes the South China Sea, where artificial islands are being built by China, in the First Layer Defense and the East China Sea in the Third Layer Defense. Along with the advancement of Chinese Navy's submarines, surface vessels and aircraft's operational capabilities, ballistic and cruise missile capabilities become a major threat to the US Navy. If a crisis occurs in the East China Sea or in the Taiwan Waters, the US Navy will face more difficulties in employing the Carrier Strike Group to manage the crisis. Meanwhile, if a crisis occurs on the Korean Peninsula, it will be a burden to dispatch Carrier Strike GroupS to the East and West Seas of the Korean Peninsula. For the stable future, the US Navy should develop a strategy to respond more effectively to the Chinese Navy, which is challenging new maritime supremacy in East Asia.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.66-72
• /
• 1997

Circular-to-rectangular transition ducts are used as exhaust components of high performance fighter aircraft with vectored thrust nozzles. Three-dimensional incompressible Navier-Stokes solver is used to analyze the transition duct. Cross sections of transition duct are defined by superelliptic equation. The grid system is generated by Non-Uniform Rational B-Spline, after generating surface grid by blending the cross sections. Good agreement between the results of the computational simulation and the experimental data is observed.

• 한국항공우주학회지
• /
• 제36권3호
• /
• pp.211-219
• /
• 2008

본 연구에서는 삼차원 비정렬 비점성 유동 해석 코드를 이용하여 전투기 형상의 외부 장착물이 꼬리 날개에 미치는 공력 간섭효과에 대한 연구를 수행하였다. 수치적 기법으로는 격자점 중심(vertex-centered)에 기초한 유한체적법과 시간 적분을 위한 내재적인 point Gauss-Seidel 반복 계산법을 사용하였다. 해석 코드의 검증을 위해 전투기 형상에 대한 정상 유동 계산을 수행하였으며 결과를 실험 데이터와 비교하였다. 외부 장착물의 후류(wake)를 정확히 포착하기 위해 예상되는 후류 영역에 대해 국부적인 격자 조밀화를 수행하였으며 천음속 영역에서의 비정상 유동 해석을 통해 외부 장착물에서 발생하는 후류가 수평꼬리날개에 미치는 간섭효과를 확인하였다. 공력 간섭효과를 감소시키기 위한 대안으로는 뒷전 플랩 꺽임각(trailing edge flap deflection)을 고려하였으며 이에 대한 정량적인 감소효과를 제시하였다.