• Journal of Preventive Medicine and Public Health
• /
• v.48 no.3
• /
• pp.151-169
• /
• 2015

Objectives: The deleterious effects of air pollution on various health outcomes have been demonstrated. However, few studies have examined the effects of air pollution on liver enzyme levels. Methods: Blood samples were drawn up to three times between 2008 and 2010 from 545 elderly individuals who regularly visited a community welfare center in Seoul, Korea. Data regarding ambient air pollutants (particulate matter ${\leq}2.5{\mu}m$ [$PM_{2.5}$], nitrogen dioxide [$NO_2$], ozone [$O_3$], carbon monoxide, and sulfur dioxide) from monitoring stations were used to estimate air pollution exposure. The effects of the air pollutants on the concentrations of three liver enzymes (aspartate aminotransferase [AST], alanine aminotransferase [ALT], and ${\gamma}$-glutamyltranspeptidase [${\gamma}$-GTP)]) were evaluated using generalized additive and linear mixed models. Results: Interquartile range increases in the concentrations of the pollutants showed significant associations of $PM_{2.5}$ with AST (3.0% increase, p=0.0052), ALT (3.2% increase, p=0.0313), and ${\gamma}$-GTP (5.0% increase, p=0.0051) levels; $NO_2$ with AST (3.5% increase, p=0.0060) and ALT (3.8% increase, p=0.0179) levels; and $O_3$ with ${\gamma}$-GTP (5.3% increase, p=0.0324) levels. Significant modification of these effects by exercise and alcohol consumption was found (p for interaction <0.05). The effects of air pollutants were greater in non-exercisers and heavy drinkers. Conclusions: Short-term exposure to air pollutants such as $PM_{2.5}$, $NO_2$, and $O_3$ is associated with increased liver enzyme levels in the elderly. These adverse effects can be reduced by exercising regularly and abstinence from alcohol.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.254-259
• /
• 2009

An experiment was conducted to evaluate the effect of different levels of extracted pigment from Dietzia natronolimnaea biomass as a source of canthaxanthin in comparison with synthetic canthaxanthin on egg yolk pigmentation. The experiment used a completely randomized design (CRD). A total of 63 laying hens, 68 weeks old, were used and the birds were allotted to 7 dietary treatments with each treatment replicated three times with three hens per replicate. Treatments consisted of 3 levels of synthetic canthaxanthin (4, 8 and 16 ppm), 3 levels of extracted pigment from D. natronolimnaea biomass (4, 8 and 16 ppm) and control. Changes in yolk color were determined in 2 eggs taken at random, during the four week experimental period from each replicate. Supplementation of extracted pigment from D. natronolimnaea biomass had a significant effect on the color of egg yolks (p<0.05). Yolk color score of the control group was 6.83 in BASF color fan and the yolk color score of different extracted pigment levels was 11.00, 12.50 and 14.50, respectively. The yolk colors of different levels of synthetic canthaxanthin were 12.00, 14.00 and 15.00, respectively. The effect of pigment supplementation on egg yolk color was better explained by polynomial response curves. The $R_{2}$ indicated that for 3 supplementation levels of each pigment studied, over 90% of the color variation could be explained by the pigment concentration. The egg yolk color after 15 and 30 days of storage was not significantly different, but boiling reduced egg yolk color significantly (p<0.05).

• Korean Journal of Community Nutrition
• /
• v.8 no.2
• /
• pp.192-201
• /
• 2003

The purposes of this research were to assess dietary fatty acid patterns and to elucidate the relationship between the serum cholesterol levels and dietary fatty acid patterns, plasma fatty acid compositions, BMI (body mass index), and other lipid profile. The subjects were 151 adults aged 23 to 80 years, selected from the Outpatient Clinic and Cardiova-scular Department of the Seoul Municipal Hospital. Dietary data were obtained using three day food records. Sixteen dietary fatty acids were analyzed using Korean and US nutrient databases. The subjects were divided into three serum cholesterol levels: desirable (< 200 mg/dl, N = 44), borderline-risk ($\geq$ 200 - < 240 mg/dl, N = 35), and high-risk ($\geq$ 240 mg/dl, N = 72) groups. The high-risk group had higher BMI, waist, and waist to hip ratio (WHR) than the desirable and borderline-risk groups. Serum concentrations of triglyceride, LDL cholesterol and LDL/HDL cholesterol ratio were significantly higher in the high-risk group as compared to those in the other two groups. The serum cholesterol levels were highly correlated with BMI (r = 0.435), triglyceride (r = 0.425) and LDL/HDL cholesterol (r = 0.870) ratio. The highest fatty acid intake was from oleic acid (33 - 34% of total fatty acid intakes), which was followed by linoleic acid (27%), palmitic acid (19%), and stearic acid (7%). There was no correlation between the serum cholesterol levels and the dietary fatty acid intakes, polyunsaturateumonounsaturateusaturated fatty acids (P/M/S) and $\omega$6/$\omega$3 ratios. The correlation between plasma fatty acids such as myristic acid, oleic acid, linoleic acid, and docosahexaenoic acid and serum cholesterol levels was also weak. (Korean J Community Nutrition 8(2) : 192~201, 2003)

• Earthquakes and Structures
• /
• v.22 no.6
• /
• pp.561-570
• /
• 2022

It is of great importance to be able to evaluate different structural systems not only based on their seismic performance but also considering their lifetime service costs. Many structural systems exist that can meet the engineering requirements for different performance levels; therefore, these systems shall be selected based on their economic costs over time. In this paper, two structural systems, including special steel moment-resisting and the ordinary concentric braced frames, are considered, which are designed to meet the three performance levels: Immediate Occupancy (IO), Life Safety (LS), Collapse Prevention (CP). The seismic behavior of these two systems is studied under three strong ground motions (i.e., Tabas, Bam, Kajour earthquake records) using the Perform3D package, and the incurred damages to the studied systems are examined at two hazard levels. Economic analyses were performed to determine the most economical structural system to meet the specified performance level requirements, considering the initial cost and costs associated with damages of an earthquake that occurred during their lifetime. In essence, the economic lifetime study results show that the special moment-resisting frames at IO and LS performance levels are at least 20% more economical than braced frames. The result of the study for these building systems with different heights designed for different performance levels also shows it is more economical from the perspective of long-term ownership of the property to design for higher performance levels even though the initial construction cost is higher.

• Journal of Audiology & Otology
• /
• v.23 no.2
• /
• pp.76-82
• /
• 2019

Background and Objectives: Noise levels and room acoustic parameters at a tertiary referral hospital, Seoul National University Hospital (SNUH) in Korea, are investigated. Materials and Methods: Through a questionnaire, acoustically problematic rooms are identified. Noise levels in emergency rooms (ERs) and intensive care units (ICUs) are measured over about three days. Acoustically critical and problematic rooms in the otolaryngology department are measured including examination rooms, operating rooms, nurse stations, receptions, and patient rooms. Results: The A-weighted equivalent noise level, L_Aeq, ranges from 54 to 56 dBA, which is at least 10 dB lower than the noise levels of 65 to 73 dBA measured in American ERs. In an ICU, the noise level for the first night was 66 dBA, which came down to 56 dBA for the next day. The noise levels during three different ear surgeries vary from 57 to 62 dBA, depending on the use of surgical drills and suctions. The noise levels in a patient room is found to be 47 dBA, while the nurse stations and the receptions have high noise levels up to 64 dBA. The reverberation times in an operation room, examination room, and single patient room are found to be below 0.6 s. Conclusions: At SNUH, the nurse stations and receptions were found to be quite noisy. The ERs were quieter than in the previous studies. The measured reverberation times seemed low enough but some other nurse stations and examination rooms were not satisfactory according to the questionnaire.

• Korean Journal of Audiology
• /
• v.23 no.2
• /
• pp.76-82
• /
• 2019

Background and Objectives: Noise levels and room acoustic parameters at a tertiary referral hospital, Seoul National University Hospital (SNUH) in Korea, are investigated. Materials and Methods: Through a questionnaire, acoustically problematic rooms are identified. Noise levels in emergency rooms (ERs) and intensive care units (ICUs) are measured over about three days. Acoustically critical and problematic rooms in the otolaryngology department are measured including examination rooms, operating rooms, nurse stations, receptions, and patient rooms. Results: The A-weighted equivalent noise level, L_Aeq, ranges from 54 to 56 dBA, which is at least 10 dB lower than the noise levels of 65 to 73 dBA measured in American ERs. In an ICU, the noise level for the first night was 66 dBA, which came down to 56 dBA for the next day. The noise levels during three different ear surgeries vary from 57 to 62 dBA, depending on the use of surgical drills and suctions. The noise levels in a patient room is found to be 47 dBA, while the nurse stations and the receptions have high noise levels up to 64 dBA. The reverberation times in an operation room, examination room, and single patient room are found to be below 0.6 s. Conclusions: At SNUH, the nurse stations and receptions were found to be quite noisy. The ERs were quieter than in the previous studies. The measured reverberation times seemed low enough but some other nurse stations and examination rooms were not satisfactory according to the questionnaire.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.31-52
• /
• 2022

Investigating and evaluating the long-term creep behavior of historical buildings built on seismic zones is of great importance in terms of transferring these structures to future generations. Furthermore, assessing the earthquake behavior of historical structures such as masonry stone bridges is very important for the future and seismic safety of these structures. For this reason, in this study, earthquake analyses of a masonry stone bridge are carried out considering strong ground motions and various water levels. Tokatli masonry stone arch bridge that was built in the 10th century in Turkey-Karabük is selected for three-dimensional (3D) finite difference analyses and this bridge is modeled using FLAC3D software based on the three-dimensional finite difference method. Firstly, each stone element of the bridge is modeled separately and special stiffness parameters are defined between each stone element. Thanks to these parameters, the interaction conditions between each stone element are provided. Then, the Burger-Creep and Drucker-Prager material models are defined to arch material, rockfill material for evaluating the creep and seismic failure behaviors of the bridge. Besides, the boundaries of the 3D model of the bridge are modeled by considering the free-field and quiet boundary conditions, which were not considered in the past for the seismic behavior of masonry bridges. The bridge is analyzed for 6 different water levels and these water levels are 0 m, 30 m, 60 m, 70 m, 80 m, and 90 m, respectively. A total of 10 different seismic analyzes are performed and according to the seismic analysis results, it is concluded that historical stone bridges exhibit different seismic behaviors under different water levels. Moreover, it is openly seen that the water level is of great importance in terms of earthquake safety of historical stone bridges built in earthquake zones. For this reason, it is strongly recommended to consider the water levels while strengthening and analyzing the historical stone bridges.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.3
• /
• pp.73-84
• /
• 2011

This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT ($-40^{\circ}C$), RT, and HT ($200^{\circ}C$)) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.163-176
• /
• 1998

In this study, airborne particle samples were obtained to determine the concentrations of particulate air pollutants in indoor and outdoor air of public facilities in Taegu area. Total of 12 public facilities, regulated by the Public Sanitary Law, were selected as sampling sites, which include three underground arcades, one railway and two bus terminals, three general hospitals, and three department stores. In each place, sampling was carried out seasonally during the period of October 1994 to July 1995, and four samples per each site per season were collected both indoors and outdoors simultaneously. After determination of suspended particulate matter (SPM) mass concentrations, the particle samples were divided into two parts for subsequent chemical analysis: one for the analysis of trace elements and the other for water soluble ions. Seasonal levels of SPM appeared to be the highest in spring and the lowest in summer both indoors and outdoors, while locational variations of highest in statioyterminals, and lowest in department stores . SPM concentrations indoors and outdoors did not show any significant differences each other in most places . However, there were significant correlations between indoor and outdoor levels of SPM and other chemical species . These results indicates that indoor SPM levels are likely to be significantly affected by outdoor sources in many places. The most significant source of SPM was estimated to be the resuspension of soil/road dust both indoors and outdoors . The concentrations of toxic heavy metals (Pb, Cd, Cr, Cu) in underground arcades appeared to be very much lower than the established air quality guidelines for underground environments. In addition, it is likely that micro-environmental parameters such as temperature, humidity, and air velocity, play a less significant role than outdoor air quality as a factor affecting the levels of particulate pollutants in indoor environments of public facilities in Taegu area.

• Journal of the Korean School Mathematics Society
• /
• v.1 no.1
• /
• pp.139-149
• /
• 1998

The purpose of this study is to check out whether the method that students make problems and anouence them to both students and teacher in the next class influence on the students' intersts, attitudes, logical thinking ability and lerning achievement in mathematics. The following is the experimental design and procedure. First, the author divided students into two groups. One is the experimental group and the other is the control group. These two groups' students consist of the advanced level, the intermediate level and the elementary level according to the students' learning proficiency Second, the author used the different teaching method between the experimental group and the control group. The author gave the experimental group's students the learning assignment problems according to their three levels and made students present the problems to the instructor and classmates in the next class. On the other hand, the author gave the control group's students learning assignment problems according to their three levels, and made them only submit their assingment to the instructor. The results of this study are as follows : 1)The method of solving and presenting the self-made problems on the basis of the informations to solve the given preceding model learning problems according to students' levels made students' learning attitudes more positive even though the method couldn't enhance the students' interests in mathematics. 2)The method of solving and presenting the self-made problems was effective to improve the logical thinking ability for especially the intermediate level's students among the three levels. In addition, the intermediate level's students showed great positive changes in their improvements of the learning achievment. It is assumed that this result is caused by two major factors(reasons). One is students' confidence that they can solve the fundamental problems without difficulty. And the other is students' desire to solve the problems of the intermediate level or more advanced level.