• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1399-1406
• /
• 2005

Recently authors have proposed a new method to estimate failure strength of a pipe with local wall thinning subject to either internal pressure or global bending. The proposed method was based on the equivalent stress averaged over the minimum ligament in the locally wall thinned region, and the simple scheme to estimate the equivalent stress in the minimum ligament was proposed, based on the reference stress concept. This paper extends the new method to combined internal pressure and global bending. The proposed method is validated against FE results for various geometries of local wall thinning under combined loading. The effect of internal pressure is also investigated in the present study. Comparison of maximum moments, predicted according to the proposed method, with published full-scale pipe test data fur locally wall-thinned pipes under combined internal pressure and global bending, shows good agreement.

• Corrosion Science and Technology
• /
• v.13 no.4
• /
• pp.130-138
• /
• 2014

Wall thinning can be classified into three types: flow-accelerated corrosion, cavitation erosion and solid particle erosion. This article presents a study of solid particle erosion, which frequently causes damages to power plants' pipe system. Unlike previous studies, this study uses a mechanism to make solid particles in a fluid flow collide with pipe materials in underwater condition. Experiment is conducted in three cases of velocity according to solid-water ratio using the three types of the materials of A106B, SS400, and A6061. The experiments were performed for 30 days, and the surface morphology and hardness of the materials were examined for every 7 days. Based on the velocity change of the solid particles in a fluid flow, the surface changes, the change in the amount of erosion, the erosion rate and the variation in the hardness of carbon steel and aluminum family pipe materials can all be determined. In addition, factor-based erosion rates are verified and a wall-thinning relation function is suggested for the pipe materials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.3
• /
• pp.278-286
• /
• 2011

The on-line monitoring for the wall thinning in secondary system has been considered one of main issues for the safety of nuclear power plants. To establish the on-line monitoring technique for the pipe wall thinning, the development of the ultrasonic transducer working in high-temperature is very important. In this investigation, the magnetostrictive transducer is concerned for high temperature condition up to $300^{\circ}C$. The magnetostrictive transducer has many advantages such as high working temperature, durability, cost-effectiveness, and shear waves, most of all. A thin Fe-Co alloy patch whose Curie temperature is over $900^{\circ}C$ was employed as a ferromagnetic material for magnetostriction. Wave transduction experiments in various temperature were carried out and the effect of bias magnets was considered together with the dry coupling performance of the transducer. From experimental results, consequently, it was found that the magnetostrictive transducer works stable even in high temperature up to $300^{\circ}C$ and can be a promising method for the on-line monitoring of the wall thinning in nuclear power plants.

• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.67-72
• /
• 2009

This paper covers finite element simulations to evaluate tube bending process of auto chassis component i.e. trailing-arm product. The rear of the auto chassis structure is primarily composed of CTBA and trailing-arm. When a car rolls into a corner, the trailing arm reacts to roll in the same degree as the car body. During the bending process of trailing arm the tube undergoes significant deformation. Thus forming defects such as excessive thinning and flattening of the tube will be formed in the outside of the tube. In this paper, we analyzed the effect of process parameters in rotary draw bending process and searched the optimized combination of process parameters using orthogonal arrays method to minimize the forming defects. In this process we analyzed several parameters which are displacement of pressure die, boosting force, initial position of mandrel bar, dimensions of mandrel in regarding to the thinning and flattening of the tube.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.493-496
• /
• 2010

This paper proposes an effective hardware scheme for thinning stage processing of a fingerprint identification algorithm based on minutiae with 40% cycle occupation of 32-bit RISC microprocessor. The thinning step is needed to be processed by hardware block, because it is performed repeatedly by processing the same operation using an image window masking method. It can reduce the burden of the system and improve speed. The hardware is implemented by HDL and simulated. The result is compared with a conventional one.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1244-1249
• /
• 2024

A combination of flow-accelerated corrosion (FAC) tests and corresponding computational fluid dynamics (CFD) tests were performed to determine the hydrodynamic parameters that could help predict the highly susceptible location to FAC in the elbow section. The accelerated FAC tests were performed on a specimen containing elbow sections fabricated using commercial 2-inch carbon steel pipe. The tests were conducted at flow rates of 9 m/s under the following conditions: water temperature of 150 ℃, dissolved oxygen <5 ppb, and pH 7. Thickness reduction of the specimen pipe due to FAC was measured using ultrasonic testing. CFD was conducted on the FAC test specimen, and the turbulence intensity, and shear stress were analyzed. Notably, the location of the maximum hydrodynamic parameters, that is, the wall shear stress and turbulent intensity, is also the same location with maximum FAC rate. Therefore, the shear stress and turbulence intensity can be used as hydrodynamic parameters that help predict the FAC-induced wall-thinning rate. The results provide a method to identify locations susceptible to FAC and can be useful for determining inspection priority in piping systems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.407-414
• /
• 2008

This study introduces an automatic image matching algorithm that can be applied for the scale different image pairs consisting of the satellite pushbroom images and the aerial frame images. The proposed method is based on several image processing techniques such as pre-processing, filtering, edge thinning, interest point extraction, and key-descriptor matching, in order to enhance the matching accuracy and the processing speed. The proposed method utilizes various characteristics, such as the different geometry of image acquisition and the different radiometric characteristics, of the multi-sensor images. In addition, the suggested method uses the sensor model to minimize search area and eliminate false-matching points automatically.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.5
• /
• pp.50-54
• /
• 2009

The new method to improve pine-fungi activity are needed by customed forest tending. Fungi is essencial for human life. Pine-mushroom (Trichroma matsutake)products are related to fungi activity. These are improved by customed forest tending. For example, species arrangement, thinning ratio, light control, water supply etc.

• Journal of Korea Foresty Energy
• /
• v.24 no.2
• /
• pp.37-45
• /
• 2005

This study presents a method how to estimate the change of stand volume, the stand biomass and the carbon removals, using dynamic stand growth model according to whether the practices for forest management are implemented or not. As a result, it shows that the rate of stand change was significantly high if the practices were implemented. Consequently, the change of carbon removals was also high. The carbon removals at the stand where the practices were not implemented, was estimated about 0.27tC/ha. And the carbon removals at the stand where the practices were implemented, was estimated 166.02tC/ha(thinning from above) and 163.75tC/ha(thinning from below). It is confirmed that the thinning activities has a great influence on the change of carbon removals and there was little difference of the carbon removals between thinning types. From this result, it is proved that forest management like thinning activities is prerequisite condition to improve the carbon removals of stand.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.486-491
• /
• 2015

In this study, we evaluated the differences in fruit development and quality indices of fruits subjected to blossom thinning before full bloom in 'Hanareum' and 'Niitaka' pears (Pyrus pyrifolia Nakai). We carried out a thinning treatments at 5 days before full bloom, targeting the blossoms at the 1st and 2nd position (T1) or the blossoms at the 6th and 7th position (T2) from the basal part of the flower cluster in both cultivars. Blossom thinning treatments increased the average fruit weight of early-season Asian pear 'Hanareum' up to 10.5% (T1) and 11.0% (T2) at harvest time (110 days after full bloom). The mid-season 'Niitaka' pear showed increased fruit weight of up to 12.6% (T1) and 16.8% (T2) at harvest time (170 days after full bloom). Moreover, these treatments increased the production rate of bigger sized fruits in both cultivars. Removal of blooms also affected fruit quality indices; the bloom-thinned fruits showed higher soluble solids contents (about $1^{\circ}Brix$) and higher skin color redness ($a^*$) especially in 'Niitaka' pears when compared to the non-thinned controls. Overall, the treatments increased the fruit size and weight as well as fruit quality including soluble solids and skin color. Bloom thinning treatment targeting the 6th to 7th blossom from the basal part of the flower cluster may be recommended as the practical thinning method in Asian pear 'Hanareum' and 'Niitaka'.