• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.687-699
• /
• 2018

Understanding rain infiltration into the ground is an important feature of landslide risk evaluation. In this study, a landslide risk index for the study area is suggested, wherein the result of the landslide risk evaluation, based on the factor of safety (FS), is used. The landslide risk index is a landslide risk prediction index that utilizes the saturated depth ratio of the ground. Based on the landslide risk result for the study area, it was found that the FS was first to decrease. However, it gradually became convergent over the 50-year rainfall intensity study period, a result that is similar to the relationship between the saturated depth ratio and soil thickness. Moreover, saturated depth was also found to be deeper on gentle slopes than steep slopes. As such, the landslide risk index, based on the Inhu-ri study result, is thus suggested. Additionally, the suggested landslide risk index was compared and analyzed against the rainfall intensity of previous landslide experience. Results thus revealed that almost all landslides that occurred were over 0.7, which is the second grade, based on the landslide risk index.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.483-489
• /
• 2020

Particulate matter is divided into PM10 (particle diameter of 10 ㎛ or less) and PM2.5 (particle diameter of 2.5 ㎛ or less), which are approximately 1/5 of the thickness of the hair. Due to its effect on the human body, lung disease, arteriosclerosis and heart It is known as a carcinogen that causes various diseases such as diseases. It is known that the main cause of such fine dust is nitrogen dioxide (NOx), which is emitted from automobiles in about 57.3% of urban roadsides. Therefore, in this study, as part of the development of functional construction materials to reduce NOx generated from road transport pollutants, comparative evaluation of NOx reduction performance was conducted according to the replacement rate of cement mortar in which cement was replaced with a porous material. In addition, the NOx reduction performance of cement mortar according to the photocatalyst application method and the number of applications was compared an d evaluated. As a result of the experiment, when activated ocher was substituted by 30%, it showed a reduction effect of about 32.7%, showing the best reduction performance.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.93-100
• /
• 2006

The lateral soil movement in soft grounds undergoing improvement with application of vertical drains is analyzed on the basis of monitoring data at three fields, in which fifty six monitoring sites are located. Based on the investigations, the criterions are suggested to predict the lateral soil movement. In order to predict the lateral soil movement in the improved soft grounds by using the dimensionless parameter R suggested by Marche & Chapuis (1974), it is desirable that the maximum lateral displacement in the soft ground below the toe of embankment should be applied to calculate R instead of the lateral displacement at the toe of embankment. The lateral soil movement may increase rapidly, if the safety factor of slope is less than 1.4 in case of high ratio of H/B (Thickness of soft ground/Embankment width) such as 1.15 or is less than 1.2 in case of low ratio of H/B such as 0.05. Also, the graph suggested by Tschebotarioff (1973), which illustrates the relationship between the maximum height of embankments and the undrained shear strength of soft grounds, can be applied to the evaluation for the possibility of the lateral soil movement due to embankments on soft grounds.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.419-425
• /
• 2023

This paper presents the research results of analyzing the high-temperature corrosion characteristics of three currently commercialized heat exchanger tube materials under actual operating conditions of a biomass power plant. In order to precisely analyze the high-temperature corrosion characteristics of these materials, a high-temperature corrosion evaluation device was installed in the power plant equipment, which allows for adjusting the surface temperature of the heat exchanger tubes. Experiments were conducted for approximately 300 hours under various temperature and operating conditions. In this study, the commercialized heat exchanger tube materials used were SA213T12, SA213T22, and SA213T91 alloys. In order to objectively analyze the high-temperature corrosion characteristics of each material, an international standard-based process to remove corrosion products was applied to obtain the weight change of the specimens, and the average thickness loss and corrosion rate were derived. Thus, the high-temperature corrosion results for each condition were quantitatively compared and analyzed. In addition, in order to increase the reliability of the high-temperature corrosion evaluation method introduced in this study, the surface and cross-sectional corrosion of the specimens were confirmed by using scanning electron microscopy and energy-dispersive X-ray analysis. Based on these analysis results, it was found that the corrosion resistance of the commercial heat exchanger materials increases as the content of chrome and nickel in the composition increases. Additionally, it was found that the corrosion phenomenon is rapidly accelerated as the surface temperature increases. Finally, the replacement period (lifetime) of the heat exchanger tubes under each condition could be inferred through this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.198-203
• /
• 2023

Purpose. The aim of this study was to evaluate the proximal contact with a dental floss compared to a celluloid strip and a metal strip in normal dental arch and investigate what the most effective method for measuring is. Materials and methods. The subjects of this study was consisted with 20 healthy adults (10 males and 10 females) who had normal dentition. A dentist with more than 5 years of clinical experience evaluated the proximal contacts using a dental floss method, a celluloid strip method, and a metal strip method. Statistical analysis were performed by the use of Mann-Whitney U test. A P-value < .05 was considered statistically significant in all analysis. In addition, in the evaluation of proximal contact using a dental floss, the measurement of proximal contact using a celluloid strip and a metal strip was compared. Results. 80 % of all proximal contact was proper. Proper proximal contact was observed at the posterior area compared to the anterior area (P < .05). And male had proper proximal contact at the anterior area, female had proper proximal contact at the posterior area (P < .05). The consistency analysis between the results of the celluloid strip and the metal strip experiment on the results obtained from the floss using the consistency scale Kappa index shows that using celluloid strip is more advantageous than using the metal strip. Conclusion. Only 80% of all proximal contact was proper. Using celluloid strips with various thickness for evaluating of proximal contact is considered to be helpful for accurate measuring of proximal contact.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.4
• /
• pp.215-229
• /
• 2023

In this study, non-destructive technologies that can be applied to evaluate the integrity of valve materials, safety against internal pressure caused by corrosion, and the blocking function of large-diameter water valves during operation without requiring specimen collection or manpower entering the inside of the valve were tested to assess the reliability of the technologies and their suitability for field application. The results showed that the condition of the graphite structure inside the valve body can be evaluated directly through the optical microscope in the field without specimen collection for large-diameter water butterfly valves, and the depth of corrosion inside the valve body can be determined by array ultrasound and the tensile strength can be measured by instrumented indentation test. The reliability of each of these non-destructive techniques is high, and they can be widely used to evaluate the condition of steel or cast iron pipes that are significantly smaller in thickness than valves. Evaluation of blocking function of the valves with mixed gas showed that it can be detected even when a very low flow rate of mixed gas passes through the disk along with the water flow. Finally, as a result of evaluating the field applicability of non-destructive technologies for three old butterfly valves installed in the US industrial water pipeline, it was found that it is possible to check the material and determine the suitability of large-diameter water valves without taking samples, and to determine the corrosion state and mechanical strength. In addition, it was possible to evaluate safety through the measurement results, and it is judged that the evaluation of the blocking function using mixed gas will help strengthen preventive response in the event of an accident.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.37-46
• /
• 2024

This study investigates the evolution of concrete damage due to chloride-induced steel corrosion through Impact-echo (IE) testing. Three reinforced concrete specimens, each measuring 1500 mm in length, 400 mm in width, and 200 mm in thickness, were fabricated using three concrete mixture proportions of blended cement types: ordinary Portland cement, ground granulated blast-furnace slag and fly ash. Steel corrosion in the concrete was accelerated by impressing a 0.5 A current following a 35-day cycle of wet-and-dry saturation in a 3% NaCl solution. Initial IE data collected during the saturation phase showed no significant changes, indicating that moisture had a minimal impact on IE signals and highlighting the slow progress of corrosion under natural conditions. Post-application of current, however, there was a noticeable decline in both IE peak frequency and the P-wave velocity in the concrete as the duration of the impressed current increased. Remarkably, progressive monitoring of IE proves highly effective in capturing the critical features of steel-corrosion induced concrete deterioration, such as the onset of internal damages and the rate of damage propagation. These results demonstrate the potential of progressive IE data monitoring to enhance the reliability of diagnosing and prognosticating the evolution of concrete damage in marine environment.

• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.185-189
• /
• 2004

The purpose of this study was to determine the possibility of in vitro maturation of tiger oocytes. Immature oocytes were recovered from a pair of ovaries. A total of 78 oocytes was collected, of which forty three were classified as good oocytes with compact cumulus cells and uniform cytoplasm. Forty three COCs were in vitro matured at $39^{\circ}C$, 5% CO2 in air atmosphere for 48 h in a IVM medium (TCM-199 supplement with 10% FBS, 0.6 mM cysteine, 0.2 mM pyruvic acid and 10 IU/mL HMG). Experiment I: the morphologic evaluation was conducted by measuring the diameter of oocytes with or without ZP, the thickness of ZP and the diameter of cytoplasm by microeyepiece at the same magnification (${\times}$100). Experiment II: the evaluation of meiotic development was conducted of the nuclear development stage of tiger oocytes. The results were summarized as follows: 1. The diameter of tiger oocytes $(176.5\pm6.1{\mu}m)$ with ZP was significantly (p<0.05) bigger than that of bovine oocytes $(150.7\pm4.9{\mu}m).$ The ZP thickness of tiger oocytes $(20.4\pm2.9{\mu}m)$ was significantly (p<0.05) bigger than that of bovine oocytes $(12.0\pm2.6{\mu}m;$ p<0.05). However, there was no significant difference in the diameter of cytoplasm (without ZP) between tiger $(122.1\pm9.7{\mu}m)$ and bovine oocytes $(118.7\pm7.5{\mu}m).$ 2. The rates of meiotic development of tiger oocytes were achieved GV (12.5 %) and MII (50.0%), respectively. These results indicated that tiger oocytes could be developed to MII in in vitro culture system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1037-1044
• /
• 1996

This study was conducted to investigate the prevalence of childhood obesity and to figure out the correlation between percentage of body fat and various criteria used for evaluating childhood obesity, and to suggest a new convenient criterion applicable to obesity assessment for large population. subject of 309(male: 153, female: 156) from Uisung elementary school in Kyungbuk, in the age range from 10 to 12 were recruited. The prevalence of obese was evaluated by the methods of Slaughter skinfold equations for children, BMI, and RI. fourteen(4.5%) by Slaughter eq, 39(12.6%) by BMI, 31 (10%) by RI were found to be obese. The results indicate that the evaluation of child obesity is influenced by the methods applied; that is, BMI and RI tend to overpredict the obese while percentage of body fat tend to underestimate. Percentage of body fat by Slaughter equations using triceps and calf skinfold is highly correlated with triceps plus subscapular skinfold thickness(male: r=0.91, female: r=0.88) and with Kim equations for Korean children(male: r=0.93, femlae: r=0.88). The results suggest that, if necessary, practitioners can adequately predict body composition without exposing the upper torso of females.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.195-202
• /
• 2013

The present study was undertaken to investigate the effects of increasing pig market weight on the incidence of the 'caky-fatty' belly, carcass grade and carcass quality traits. To this end, 500 (Yorkshire ${\times}$ Landrace) ${\times}$ Duroc market pigs consisting of equal numbers of barrows and gilts were slaughtered at body weights ranging from 85 to 150 kg and their carcasses were analyzed. Backfat thickness (BFT; mm) of the barrows and gilts regressed on live weight (kg) linearly as follows: BFT (y) = 0.1827x + 3.4825 ($r^2$ = 0.4671) and y = 0.2015x-0.6972 ($r^2$ = 0.4736), respectively. The caky-fatty belly, which, by definition of the present study, had = 55% fat by weight in the dorsal-side half of a 5 cm-wide belly strip between the $11^{th}$ and $12^{th}$ ribs, was found in 10 carcasses from barrows. However, no belly was condemned as 'caky-fatty' by the retailers. Total number of carcasses which were down-graded on account of overweight was as many as 101 (20.2%). The $1^+A$-grade carcasses exhibited a superior intramuscular fat score to all other grades, but except for this and the defective quality traits, no visible differences were found in carcass quality among different carcass grades. In conclusion, the current carcass grading system, which is sparingly reflective of the carcass quality and also under-evaluates the larger but otherwise normal carcasses, may as well be revised. Moreover, the incidence of the caky-fatty belly appears not to be a critical factor to be considered when increasing the pig market weight.