• 대한영양사협회학술지
• /
• 제30권1호
• /
• pp.11-28
• /
• 2024

This study aimed to establish the optimal amount of thickening agent for the appropriate viscosity in soups and beverages, which are part of the dysphagia diet. The soups were bean sprout soup and soybean paste soup; the beverages were orange juice, regular milk, and low-fat milk; the thickening agent was one type of xanthan gum product. After adding the thickening agents (from 1 g to 5 g per 200 mL of the test food), syringe tests were conducted over time (5, 10 and 15 minutes) to verify the effects of the amount of thickening agent added per sample and the time between addition and achieving the resulting viscosity, and to establish the optimal addition conditions to reach IDDSI levels 1, 2, and 3 of the dysphagia diet. Water (based on 200 mL) was used as the standard control. These results provide a useful basis for customized diets based on the patient's dysphagia severity. On the other hand, this study is limited by including only liquid foods in the dysphagia diet and one type of xanthan gum-based thickening agent. Therefore, it is necessary to conduct continuous research, based on the study results, to modify the viscosity of the dysphagia diet using various thickening agents and foods and prevent nutritional deficiencies by managing the diet according to the patient's swallowing ability.

• 한국주조공학회지
• /
• 제30권6호
• /
• pp.241-246
• /
• 2010

The viscosity of foam metal is necessary to get the pores, but it is difficult to manufacture net-shape foam, because the fluidity decreases by increasing viscosity. In this study, the A356 alloy which has good fluidity and less defect was selected and fabricated to foam metal. To understand about effect of thickening agent on foaming and mechanical properties, quantity of thickening agent was changed. The pore size, porosity and distribution of foam metal were measured by i-solution program. And compression test were performed by UTM. In case of 3.0wt% Ca in thickening agent, it is found that most of foam consist of homogeneous shape, and the growth height had the highest value of 204 mm in the all fabricated foams. The porosity was 93% and compressive strength was 3.1 MPa. In the microstructure, the $Al_2Si_2Ca$ intermetallic compound and Ti were observed. The vickers hardness value rose with increasing viscosity value.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.318-326
• /
• 2015

A pre-treatment process is essential for getting high quality of digital textile printing(DTP). In this study, we have studied three kinds of carrageenan polymer(k-, ${\lambda}$-, i-Carrageenan) as a pre-treatment thickening agent for the first time. Alginate polymer was also examined and its results were compared with that of the three kinds of carrageenan polymer. To confirm the performance of each thickening agent, we examined for a sharpness, color strength and fastness(washing, rub, light). The result showed that ${\lambda}$-Carrageenan has superior property in sharpness with low viscosity and i-Carrageenan was excellent in the color strength among the pre-treatment agents. Washing fastness to color change and staining for the all samples were 4 or 4-5 grade. Both dry and wet rubbing fastness of the samples were 4-5 grade. However, ${\lambda}$-Carrageenan coated sample has the lowest grade in light fastness. As a result, we found the possibility of carrageenan polymer as pre-treatment agent.

• 한국조리학회지
• /
• 제13권1호
• /
• pp.112-118
• /
• 2007

This study was carried out to investigate the quality characteristics of snow crab cream soup in order to seek the possibility of using fresh yams and potatoes instead of roux as thickening agents. The highest crude lipid(p<.05) and moisture(p<.001) were examined for the snow crab cream soup with yams and with potatoes as thickening agents($S_1$),($S_2$). The highest pH levels of $S_2(5.75)$ for the snow crab cream soup with yams and with potatoes were 75% and 25%. respectively. The highest lightness of 71.51(L value) was found in the 100% potato as a thickening agent($S_5$)(p<.001). The redness(a value) and yellowness(b value) were increased by adding potatoes to the snow crab soup(a=p<.001), (b=p<.01). Viscosity was increased by potato contents, and highest for the snow crab cream soup($S_5$) (p<.001). In sensory evaluation, the highest sensory scores for flavor and texture(p<.001) of mean 5.11 and 5.05, respectively, were obtained from the snow crab cream soup with yams(75%) and with potatoes(25%)($S_4$). The highest overall acceptability of mean 5.11 was found in the snow crab cream soup with yams(50%) and with potatoes(50%) as thickening agents($S_3$)(p<.001).

• 한국조리학회지
• /
• 제13권3호
• /
• pp.44-53
• /
• 2007

This study investigated the utilization of pumpkin cream soup mixture of pumpkin P1(sweet pumpkin 25%, pumpkin 75%), and S1(rice flour 100%) and S3(rice powder 50%, glutinous rice powder 50%) as thickening agents showed highest preference for pumpkin cream soup. Rice powder was used in pumpkin cream soup as a thickening agent. Hunter's color marked the lowest value in using group of flour roux, in contrast with the highest value in using glutinous rice powder roux. The results of viscosity were diverse according to the condition of relationships between the percentage of contents flour, rice and glutinous rice control. For the sensory evaluation, parameters such as appearance, color, viscosity and savory taste increased significantly from the control at glutinous rice roux, and overall acceptability marked the lowest result in flour roux control.

• 한국식품조리과학회지
• /
• 제20권6호
• /
• pp.568-574
• /
• 2004

In order to seek the possibility of using rice flour and potato as thickening agent instead of roux, sensory evaluations of cream soups manufactured from 3 different thickening agents were conducted. The viscosity, moisture and lipid contents, and the color affecting the quality of the soup were investigated. The results were as follows: 1. As thickening agents for 200g of the cream soups, rice flour and potatoes at 20.5 and 20g, respectively, were needed in order to make soup with a similar concentration to that manufactured using 20g of roux. 2. In the sensory tests, the soup made with rice flour had the most preferred overall acceptability, with a significantly preferable taste. The soup made with rice flour had the strongest whiteness and savory taste, but that made with roux had the strongest viscosity and smooth feeling in the mouth feel. There was no difference between the samples with regard to nutty flavor. The whiteness, palatability, viscosity and smooth feel sensory properties were positively correlated with the overall acceptability. Among these properties, the palatability showed the highest correlation (r=0.538) with overall preference. 3. The cream soup made using potatoes as the thickening agent had a $76.20\%$ water content, whereas those made with rice flour and roux had 73.00 and $64.00\%$ respectively The fat content of the cream soup made with roux was $10.24\%$, which was twice as high as those of the rice flour and potato soups. 4. Among the 3 kinds of cream soup, the one made with rice flour had the whitest color.

• 한국의류학회지
• /
• 제41권2호
• /
• pp.212-223
• /
• 2017

This research investigated the screen printing method for natural indigo dye on cotton fabric. We examined four types of thickening agents (arabic gum, guar gum, indalca, and CMC) based on their ability to retard the oxidation of natural indigo print paste while the paste remained on the screen frame. The results indicated that the retardation of arabic gum towards oxidation was the greatest among the four types of thickening agents. The highest K/S value of the printed cotton was observed with a dye concentration of 50g/L fermented indigo powder. The best printing results were obtained when the duration of dye efficiency was tested for the 10 minutes of the dye paste remaining on the screen with a thickening agent concentration of 26.56% that represented 530 cps viscosity. The test of colorfastness to washing and rubbing of the printed cotton resulted in grade 5, and the colorfastness to sunlight resulted in grade 4. Chinese traditional Naminwhapo printing was reproduced on cotton fabric using the natural indigo printing method derived from this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.68-69
• /
• 2019

Integrating 3D printing into architecture is gaining attention because it allows construction of construction structures without formwork. Among them, 3D printing construction materials must have high flow performance and at the same time ensure the performance that does not collapse during lamination. Therefore, in this study, we tried to determine the fluidity and lamination properties of mortar formulations, and set the thickener incorporation ratio as the formulation parameters. As a result of this experiment, it was confirmed that the lamination performance was secured from the thickening agent mixing rate of 1.5%.

• 대한환경공학회지
• /
• 제36권3호
• /
• pp.172-177
• /
• 2014

가압형 부상법에 비해 낮은 압력에서 미세기포를 발생시키는 저압형 부상법을 슬러지 부상 농축에 적용하여 그 성능을 검증하고 실제 적용가능성을 확인하였다. 파일롯 규모의 저압형 부상조를 충남 N.S. 하수처리장에 설치하여 혼합슬러지의 농도, 응집제 주입량 및 혼합슬러지 대비 미세기포수의 비율과 같은 운전 변수가 혼합슬러지 농축에 미치는 영향을 확인하였다. 미세기포는 내부 압력이$1.5kgf/cm^2$으로 유지된 미세기포발생기에서 공기와 기포조제가 포함된 물을 고속 충돌 방식으로 발생시켰으며, 이를 부상농축 실험에 사용하였다. 장기운전 시 유입된 혼합슬러지의 SS 농도는 평균 14,400 mg/L였으며, 응집제 농도 27.6 mg/L, 기포조제 농도 4.0 mg/L, 혼합슬러지 대비 미세기포수의 비를 9.7%로 하여 저압형 부유부상조를 운전한 결과, 60,300 mg/L의 농축슬러지 고형물함량과 99% 이상의 고형물 회수율을 얻었다. 이 경우의 고형물 표면적 부하율은 $30kg/m^2/hr$로 2011년 환경부에서 제정한 하수도 상압 부상농축 시설기준 25 $kg/m^2/hr$을 상회하였다.

• 한국식품영양과학회지
• /
• 제30권6호
• /
• pp.1060-1067
• /
• 2001

깍두기에 여러 가지 점증제를 첨가하여 2$0^{\circ}C$에서 숙성시키면서 이화학적, 관능적 특성을 측정한 결과는 다음과 같다. 산도는 점증제 첨가군이 대조군보다 높았으나 숙성 말기 (숙성 7일)에 xanthan gum 첨가군과, 산처리 전분은 대조군보다 낮았다. 유리당 함량은 점증제 첨가군이 담금 직후에는 대조군보다 높았으나 숙성됨에 따라 크게 감소하여 숙성 7일에는 xanthan gum을 제외한 모든 점증제가 대조군보다 낮았다. 주요 유리당으로는 대조군과 점증제 첨가군 모두 포도당과 과당이었으며, 이들 당의 함량은 숙성 기간이 경과됨에 따라 감소하였으나, 만니톨은 증가하였다. 점도는 담금직 후에는 점증제 첨가군이 대조군에 비해 높았으나 숙성초기에 급격히 감소하여 대조군과 유사하였으나 xanthan gum 첨가군의 점도는 대조군보다 매우 높았고 숙성이 진행되어도 점도의 감소정도가 적어 초기 점도를 유지하였다. 경도는 숙성이 진행되면서 감소하였으나 찹쌀, 인산가교전분, xanthan gum 첨가군은 숙성 7일에 대조군에 비해 유의적으로 높았다(p<0.05). 관능적 특성으로 신냄새, 신맛, 감칠맛은 모든 처리군에서 유의적인 차이는 없었다. 군냄새는 숙성 5일에 찹쌀, 밀가루, 산처리 전분 첨가군은 대조군에 비해 유의적으로 높았으며, xanthan gum, 인산가교 전분, 초산아디피산 전분은 유의적인 차이가 없었다. 전분맛은 xanthan gum 첨가군이 숙성 3일 이후에 대조군에 비해 유의적으로 높았다 (p<0.05). 점도는 숙성이 경과됨에 따라 유의적으로 낮아졌 으나 인산가교 전분과 xanthan gum 첨가군은 유의적으로 높았다. 경도는 찹쌀, 초산아디피산 전분, 인산가교 전분 첨가군이 유의적으로 낮았고, xanthan gum 첨가군은 숙성기간이 경과되어도 경도가 높게 유지되었다(p<0.05). 전반적인 기호도는 숙성 7일에 찹쌀, 밀가루, 옥수수 전분 첨가군이 대조군에 비해 유의적으로 낮은 점수를 나타내었고, 산처리 전분, 인산가교 전분, xanthan gum 첨가군은 대조군과 차이가 없었다.