• Tribology and Lubricants
• /
• 제4권2호
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.941-946
• /
• 2018

Currently, due to the development of technology, the industry is proceeding with the development of advanced materials with high performance such as light weight, heat resistance and electric conductivity. Carbon Fiber Reinforced Plastics (CFRP) is an excellent material with high heat resistance, high strength and thermal shock resistance. In order to obtain excellent hole shape in CFRP drilling, we compared the modified drill shape and the conventional carbide drill. On the other hand, we determine the proper helix angle by observing the CFRP surface according to the helix angle at the trimming of the end mill proceeding after the hole machining.

• Composites Research
• /
• 제29권1호
• /
• pp.40-44
• /
• 2016

원자력발전소에서 사용되고 있는 핵연료 피복관은 핵분열 생성물들의 외부 유출을 방지하기 위해 고온 고압의 냉각수 분위기에서 우수한 산화저항성을 가져야 한다. 그러나 후쿠시마 원전사고의 LOCA(Loss-Of-Coolant-Accident)와 같은 중대사고에서 핵연료의 피복관과 수증기 사이의 격렬한 반응으로 인해 급격한 고온산화를 동반한 다량의 수소발생으로 수소폭발을 방지하기 위한 핵연료의 개발이 요구되고 있다. 이에 따라 핵연료 피복관의 안전성 향상을 위해 내방사선성이 우수하며 높은 강도와 산화, 부식에 대한 내화학적 안정성 및 우수한 열전도도 의 특성을 갖는 SiC와 같은 구조용 세라믹스가 활발히 연구되고 있다. $SiC_f/SiC$ 복합체 보호막 금속 피복관은 지르코늄 피복관 튜브에 SiC 섬유를 필라멘트 와인딩 한 후 Polycarbosilane을 polymer로 함침하여 기지상을 형성하는 공정을 이용하였다. 따라서 이렇게 제조한 $SiC_f/SiC$ 복합체 금속 피복관을 Drop Tube Furnace를 이용한 열충격에 따른 시편의 산화 및 미세조직을 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.417-420
• /
• 2009

본 연구의 그라파이트는 로켓 노즐목 재료로 많이 사용되는 것으로써 다른 어떤 내열재료보다 로켓추진기관의 작동시간 동안 그 형상을 유지할 수 있는 삭마저항성과 열전도도가 큰 재료이다. 노즐목으로 사용되는 그라파이트는 내삭마성, 사용가능 온도, 가격, 무게측면에서 유리하지만 열충격 강도가 상대적으로 작기 때문에 설계시 구조적인 안전성을 충분히 확보해야만 한다. 본 연구에서는 로켓 노즐목으로 많이 사용하는 ATJ 그라파이트에 대하여 실험과 해석을 통하여 고온 파괴 인성치를 결정하였으며, 열충격시험 결과를 그라파이트 재료의 비선형성을 고려한 hypo elastic 기법을 이용한 해석적 방법으로 비교하여 해석의 정확성을 확인하였다.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.62-68
• /
• 2016

Feeder cable assembly는 정보통신용 자동차부품이다 기능을 제대로 하지 않으면 자동차의 제어와 안전에 큰 문제가 발생한다. 가속수명시험은 시험시간을 단축할 목적으로 짧은 시간에 잠재적인 고장모드와 고장을 찾기 위하여 기속조건(스트레스, 스트레인, 온도 등)에서 실험을 실시하는 것이다. 고장원인은 부품의 품질과, 고장으로 유도하는 공정, 디자인에 의해 발생하는 결함이다. 열충격은 온도차에 의하여 부품의 열팽창 정도가 다른 것에 기인한다. 열충격시험은 부품이 급격한 온도차를 견디는 능력을 실험하는 것이다. 본 연구에서는 가속시험의 coffin-manson 식을 이용하여 정상조건(최고온도 $80^{\circ}C$, 최저온도 $-40^{\circ}C$)과 가속조건(최고온도 $120^{\circ}C$, 최저온도 $-60^{\circ}C$)을 이용하여 가속계수를 계산하여 2.25 값을 얻었다. 정상조건에서 1,000 사이클 실험이 가속조건에서 444 사이클 실험만하여도 됨을 알 수 있었다. Bx 수명 식을 이용하여 가속조건에서 시료가 5개, B0.04%.10years 조건에서 747 사이클 결과를 얻었다. 정상조건에서 1,000 사이클, 가속조건에서 747 사이클 실험한 feeder cable assembly 시료 5개를 각각 네크워크 분석기를 이용하여 성능시험을 실시하고, 와이블분포의 모수분포값을 비교한 결과 가속이 잘 되었음을 알 수 있었다. 동등한 신뢰도에서 가속실험을 통하여 시험시간을 1/4 정도 단축할 수 있었다.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.67-77
• /
• 1999

The Ni base superalloy Mar-M247 substrate was aluminized or aluminized after boronizing by the pack cementation under Ar atmosphere. The hot corrosion resistance and after-heat-treatment effect of aluminized specimens were studied by the cyclic hot corrosion test in $Na_2SO_4$-NaCl molten salt. XRD analysis showed that the $Ni_2Al_3$ phase was formed between the coated layer and substrate below 1273K but the NiAl phase above 1273K. The peak of the NiAl phase was developed after heat treatment. Corrosion test showed that corrosion resistance of the specimen with the NiAl phase was better than that with the $Ni_2Al_3$ phase. Corrosion resistance could be improved by heat treatment to form ductile NiAl phase, where cracks were not formed by thermal shock on coating layer. Moreover, it appeared that heat treatment played a role to improve corrosion resistance of Al diffusion coating above 1273K. The existence of boron in the Al diffusion coating layer obstructed outwared diffusion of Cr from the substrate, and it influenced on corrosion resistance of the coating layer by weakening adherence of the oxide scale.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.48-53
• /
• 2019

Carbon fiber reinforced SiC composites (C/SiC) have high-temperature stability and excellent thermal shock resistance, and are currently being applied in extreme environments, for example, as aerospace propulsion parts or in high-performance brake systems. However, their low thermal conductivity, compared to metallic materials, are an obstacle to energy efficiency improvements via utilization of regenerative cooling systems. In order to solve this problem, the present study investigated the bonding strength between carbon fiber and matrix material within ceramic matrix composite (CMC) materials, demonstrating the relation between the microstructure and bonding, and showing that the mechanical properties and thermal conductivity may be improved by treatment of the carbon fibers. When fiber surface was treated with a nitric acid solution, the observed segment crack areas within the subsequently generated CMC increased from 6 to 10%; moreover, it was possible to enhance the thermal conductivity from 10.5 to 14 W/m·K, via the same approach. However, fiber surface treatment tends to cause mechanical damage of the final composite material by fiber etching.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.26-34
• /
• 2016

Automotive today has been transforming to an electronic product by adopting a lot of convenience and safety features, suggesting that joining materials and their mechanical reliabilities are getting more important. In this study, a Sn-Cu-Cr-Ca solder composition having a high melting temperature ($>230^{\circ}C$) was fabricated and its joint properties and reliability was investigated with an aim to evaluate the suitability as a joining material for electronics of engine room. Furthermore, mechanical properties change under complex environment were compared with several existing solder compositions. As a result of contact angle measurement, favorable spreadability of 84% was shown and the average shear strength manufactured with corresponding composition solder paste was $1.9kg/mm^2$. Also, thermo-mechanical reliability by thermal shock and vibration test was compared with that of the representative high temperature solder materials such as Sn-3.5Ag, Sn-0.7Cu, and Sn-5.0Sb. In order to fabricate the test module, solder balls were made in joints with ENIG-finished BGA and then the BGA chip was reflowed on the OPS-finished PCB pattern. During the environmental tests, resistance change was continuously monitored and the joint strength was examined after tests. Sn-3.5Ag alloy exhibited the biggest degradation rate in resistance and shear stress and Sn-0.7Cu resulted in a relatively stable reliability against thermo-mechanical stress coming from thermal shock and vibration.

• 한국결정성장학회지
• /
• 제29권2호
• /
• pp.61-70
• /
• 2019

Geopolymer는 시멘트와 비교하여 $CO_2$ 배출량의 감소, 내화성, 낮은 열전도성 등 다양한 장점을 보유하고 있는 eco-friendly 건설재료이다. 그러나 표면에 화염을 가할 경우 geopolymer panel 표면의 열적거동에 대한 연구결과는 많지 않다. 본 연구에서는 내열성 건축자재로서 화염노출시 geopolymer 경화체의 표면특성을 조사하기 위하여 alumina 골재가 사용된 geopolymer 경화체 표면의 화염노출 특성에 대하여 조사하였다. 화염노출시 panel의 외형변형 및 열충격에 의한 크랙은 없었으며, calcite의 잔존량과 aluminosilicate gel의 halo 패턴으로 보아 화염에 의한 탈탄산 및 탈수는 표면에 국한되어 발생했으며, geopolymer 경화체의 내구성은 화염조사 후에도 유지되고 있는 것으로 판단된다. Quartz와 calcite가 감소함에 따라 gehlenite와 calcium silicate가 증가하는 경향을 나타내고 있으며, BFS의 치환량이 많을수록 현저하게 나타난다. 화염노출에 따른 미세구조의 변화는 탈탄산, 결정수의 탈수 등으로 기공의 형성과 발전되는 과정을 거쳐 calcium silicate, gehlenite 등과 같은 새로운 결정상의 형성에 의해 geopolymer panel 표면의 치밀화와 강화기구로 작용하여 내구성이 향상된 것으로 생각된다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.195-214
• /
• 2000

The high-speed steel (shorten as HSS) consists of Fe and several kinds of transition metal carbides. The cutting tools or wear-resistant materials made from HSS experience relatively high thermal shock because a coolant such as water or oil is flowed over the surface of heated HSS. The purpose of this research is to increase the hardness, strength, fracture toughness and thermal shock resistance of HSS. A possible strategy is to incorporate a hard ceramic material with high strength in HSS matrix. This paper describes the processing, microstructure and mechanical properties of the oriented unidirectional mullite fiber/HSS composite. The unidirectional mullite fibers of 10${\mu}{\textrm}{m}$ diameter were dispersed by the ultrasonic irradiation of 38 kHz in an ethylenglycol suspension containing HSS powder of 11${\mu}{\textrm}{m}$ median size. The dried green composites with 4-68 vol% fibers were hot-pressed for 2h at 100$0^{\circ}C$ in Ar atmosphere under a pressure of 39 MPa. The higher density was achieved in the composite with a lower content of fibers. The oriented unidirectional fibers were well dispersed in the HSS matrix. The average distance between the center of fibers in the cross section was close to the value calculated from the fiber fraction. No reaction occurred at the interfaces between HSS and mullite fibers in the composites. The composite with 13.6 vol% fibers showed 100 MPa of four point flexural strength at room temperature. The thermal expansion of composite with heating was influenced by the orientation of mullite fibers.