• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.785-789
• /
• 2006

BiSrCaCuO(2223) superconductor was fabricated by the thermal pyrolysis method. The superconducting precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12 h is not in the amorphous state as expected but in a crystalline state. In this paper, the establishment of fabrication condition was examined so as to improve the related properties to the practical use of BiSrCaCuO superconductor, and we reported the production of the BiSrCaCuO by the pyrolysis method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.12
• /
• pp.1208-1213
• /
• 2007

Some structural problems and temperature difference of the pyrolysis equipment were improved by using the structure analysis and the optimal design of torch. The pyrolysis equipment developed in this study is expected to the excellent pyrolysis effect. To modify user-friendly the dimension of a part, we developed the feature modeling system that all of the related parts automatically change applying to the three-dimensional modeling method.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.2
• /
• pp.223-233
• /
• 2020

Fast pyrolysis is one of the most promising technologies for converting biomass to liquid fuels. Pyrolysis bio-oil can replace petroleum-based fuels used in various thermal conversion devices. However, pyrolysis bio-oil is completely different from petroleum fuels. Therefore, in order to successfully use pyrolysis bio-oil, it is necessary to understand the fuel characteristics of pyrolysis bio-oil. This paper focuses on fuel characteristics and upgrading methods of pyrolysis bio-oil and discusses how these fuel characteristics can be applied to the use of pyrolysis bio-oils. In addition, the fuel quality standards of fast pyrolysis bio-oil were examined.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1276-1280
• /
• 2003

Thermal behavior of bromphenols was investigated by direct pyrolysis at high temperature. The thermal degradation products formed by the pyrolysis of mono-bromophenols (o-, m-, and p-) were identified by gas chromatography-mass spectrometry. During the pyrolysis reactions, several kinds of dioxins and furans were produced, and the relative ratio of pyro-products was dependent on the substituted position of bromine in phenolic structure due to the effect of symmetry and steric hindrance. The formation of dioxins can be explained by the phenoxy radical addition and Br atom elimination at an ortho-carbon site on phenolic structure. On the other hand, the formation of furans can be explained by the ortho-ortho carbon coupling of phenoxy radicals at unsubstituted sites to form o, o'-dihydroxydiphenyl intermediate via its keto-tautomer, followed by $H_2O$ elimination. The pyrolysis temperature has also a substantial effect on the dimerized products quantities but little effect on the type of pyro-products. Moreover, the formation mechanism of pyro-products was suggested on the basis of products identified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.83-91
• /
• 2005

Pyrolysis-mass spectrometry has been used to characterize the 17 biological materials including bacteria and proteins. In this study, an in situ thermal-hydrolysis methylation(THM) procedure using tetramethylammonium hydroxide(TMAH) was employed. The biological materials are ionized using chemical ionization(CI) method with ethanol by ion trap mass spectrometer(ITMS), which attached with our own made pyrolyzer module, and then their pyrolysis mass spectra were obtained. The major distinct characteristic peaks were selected from all the range of mass spectra, and analyzed using principal component analysis(PCA) method to assess the classification/identification possibility of biological materials.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1337-1338
• /
• 2006

BiSrCaCuO was prepared by the thermal pyrolysis method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $90^{\circ}C$ and calcination at $840^{\circ}C-920^{\circ}C$ for 4h, the high Tc phase was cleary observed. In this paper, the establishment of fabrication condition and additive effects of second elements were examined so as to improve the related properties to the practical use of BiSrCaCuO superconductor, and we reported the production of the BiSrCaCuO high Tc superconductor by the pyrolysis method.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.706-713
• /
• 2011

The effects of silica-alumina type catalysts addition on the thermal decomposition of ethylene vinyl acetate (EVA) resin have been studied in a thermal analyzer (TGA, DSC) and a small batch reactor. The silica-alumina type compounds tested were kaolinite, bentonite, perlite, activated clay and clay. As the results of TGA experiments, pyrolysis starting temperature for EVA resin had the 1st pyrolysis temperature range of 300~$400^{\circ}C$ and the 2nd pyrolysis temperature range of 425~$525^{\circ}C$. The silica-alumina type catalysts did not affect the pyrolysis rate in EVA pyrolysis reaction. In the DSC experiments, addition of kaolinite and bentonite catalysts reduced the heat of fusion and heat of 2nd pyrolysis reaction. In the batch system experiments, the mixing of silica-alumina type catalysts enhanced the yield of fuel oil, and affected to the distribution of carbon numbers. In the silica-alumina type inorganic material used in this experiments, bentonite was the most effective from the pyrolysis heat, yields, and the characteristics of fuel oil.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.821-827
• /
• 1995

Polychlorodibenzo-p-dioxins(PCDDs) have been prepared by microsacale pyrolysis of trichlorophenates. During the pyrolysis reaction, dechlorinated dibenzo-p-dioxins were also formed by the thermolysis of PCDDs. The dechlorination pathways of PCDDs were suggested in this reaction. The identification of these products was performed using capillary column gas chromatography-mass spectrometry.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.34-41
• /
• 2011

Fire characteristics can be analyzed more realistically by using more accurate properties related to the fire dynamics and one way to acquire these fire properties is to use one of the inverse property estimation techniques. In this study two optimization algorithms which are frequently applied for the inverse heat transfer problems are selected to demonstrate the procedure of obtaining pyrolysis properties of charring material with relatively simple thermal decomposition. Thermal decomposition is occurred at the surface of the charring material heated by receiving the radiative energy from external heat sources and in this process the heat transfer through the charring material is simplified by an unsteady 1-dimensional problem. The basic genetic algorithm(GA) and repulsive particle swarm optimization(RPSO) algorithm are used to find the eight properties of a charring material; thermal conductivity(virgin, char), specific heat(virgin, char), char density, heat of pyrolysis, pre-exponential factor and activation energy by using the surface temperature and mass loss rate history data which are obtained from the calculated experiments. Results show that the RPSO algorithm has better performance in estimating the eight pyrolysis properties than the basic GA for problems considered in this study.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.2
• /
• pp.103-110
• /
• 2003

This study was conducted to investigate the pyrolysis products of ι-menthol by Curie-Point pyrolysis. The pyrolysis of ι-menthol was performed at 16$0^{\circ}C$, 42$0^{\circ}C$, $650^{\circ}C$, and 92$0^{\circ}C$ by Curie-Point Pyrolyzer and their pyrolysis products were analyzed by GC/MSD. In addition, tobacco leaves added ι-menthol were pyrolyzed at the same condition in case of ι-menthol. The beginning temperature for pyrolysis formation was in the vicinity of 42$0^{\circ}C$ and the major components of the pyrolysis products identified were iso-menthol, 2-menthene, menthomenthene, and menthone. The amount of these components was increased by increasing temperature and the hydrocarbons such as hexadecene and pentadecene formed by ring cleavage were generated at 92$0^{\circ}C$. The yield of ι-menthol in pyrolysis of tobacco leaves was decreased as the temperature of pyrolysis was raised and the pyrolysis products of ι-menthol weren't identified in the pyrolysis of tobacco leaves. Also, to analyze the weight decrease, ι-menthol was analysed by thermal analyzer(TA), and then the weight decrease of ι-menthol was occurred in the vicinity of 18$0^{\circ}C$.