• 공업화학
• /
• 제5권6호
• /
• pp.1056-1061
• /
• 1994

$80^{\circ}C$에서 열처리하거나, $80^{\circ}C$와 상대습도 85%인 습도 조건에서 처리한 황동이 피복된 강선 코드의 표면 상태와 고무와 접착 성질을 조사하였다. 열처리로 황동의 산화가 진행되었으며, 습윤처리 후에는 더 심하게 산화되었다. 처리기간이 길어질수록 전처리한 코드의 접착 성질이 나빠졌으며, 고무부착 정도가 심하게 저하되었다. 황동 피복층의 산화로 인한 코드의 접착 성질 저하를 산화아연층의 과도한 성장과 연계지어 설명하였다.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.25-29
• /
• 2020

The purpose of this study was to investigate the characteristics of lignin fractionated from waste wood (WW) using a two-step process of ethanol organosolv pretreatment followed by ultrafiltration with membranes of different molecular weight cut-offs (1, 5 and 20 kDa). The different permeates obtained were characterized by fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The analysis by FT-IR and NMR of these lignins showed that the lignin core was successfully separated from WW. TGA curves confirmed that the thermal properties of lignin fractionated by ultrafiltration were almost identical to each other. The results from GPC confirmed that fractionating of lignin was achieved by ultrafiltration. For the membrane fractionation process, values of molecular weight decreased as the cut-offs used to obtain the fractions became smaller. As a result, fractionating lignin by a two-step process allowed separating different fractions of lignin of different molecular weights yielded high purity without interference from existing pollutants in WW. The two-step process offers the possibility of using fractionated WW as an untapped source of lignin.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.293-293
• /
• 2010

Carbon nanotubes (CNTs) have attracted considerable attention as possible routes to device miniaturization due to their excellent mechanical, thermal, and electronic properties. These properties show great potential for devices such as field emission displays, CNT based transistors, and bio-sensors. The metals such as nickel, cobalt, gold, iron, platinum, and palladium are used as the catalysts for the CNT growth. In this study, diamond-like carbon (DLC) was used for CNT growth as a nonmetallic catalyst layer. DLC films were deposited by a radio frequency (RF) plasma-enhanced chemical vapor deposition (RF-PECVD) method with a mixture of methane and hydrogen gases. CNTs were synthesized by a hot filament plasma-enhanced chemical vapor deposition (HF-PECVD) method with ammonia (NH3) as a pretreatment gas and acetylene (C2H2) as a carbon source gas. The grown CNTs and the pretreated DLC filmswere observed using field emission scanning electron microscopy (FE-SEM) measurement, and the structure of the grown CNTs was analyzed by high resolution transmission scanning electron microscopy (HR-TEM). Also, using energy dispersive spectroscopy (EDS) measurement, we confirmed that only the carbon component remained on the substrate.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.451-454
• /
• 2000

We have grown vertically aligned carbon nanotubes in a large area of Co-Ni codeposited Si substrates by the thermal CVD usign $C_2H_2$ gas. Since the discovery of carbon nanotubes, growth of carbon nanotubes has been achieved by several methods such as laser vaporization, arc discharge, and pyrolysis. In particular, growth of vertically aligned nanotubes is important to flat panel display applications. Recently, vertically aligned carbon nanotubes have been grown on glass by PECVD. Aligned carbon nanotubes can be also grown on mesoporous silica and Fe patterned porous silicon using CVD. In this paper, we demonstrate that carbon nanotubes can be vertically aligned on catalyzed Si substrate when the domain density of catalytic particles reaches a certain value. We suggest that steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically and each nonotubes are grown in bundle.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1809-1816
• /
• 2000

본 연구는 상압유통식 반응장치를 이용하여 석유화학공단에서 주로 발생되는 휘발성 유기화합물(volatile organic compound: VOC) 인 methanol의 연소에 대한 다양한 금속-프탈로시아닌의 촉매활성에 관하여 연구하였다. Co-PC의 촉매활성은 air+methanol의 혼합물을 이용하여 전처리한 경우가 air만으로 전처리한 경우보다 더 높았으며, 금속-PC의 촉매활성은 metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC의 순서 였다. TG/DTA 분석 결과, 금속-PC 의 열분해 용이 성은 metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC의 순서로 나타었으며, 금속과 프탈로시아닌의 결합특성에 따른 차이로 판단된다. XRD 및 EA 분석결과, 전처리한 후의 Zn-PCS와 metal free-PC는 원래의 결정구조가 거의 유지되었지만, Co-PC, Cu($\alpha$)PC 및 Fe-PC는 원래의 결정구조가 파괴되는 것으로 나타났다. 전처리한 후의 Co-PC는 금속산화물인 $Co_3O_4$의 형태로 존재하였으며, Co-PC의 촉매활성이 가장 우수하였다. Co-PC 상에서 methanol의 촉매연소는 반응물의 농도가 높거나 접촉시간(W/F)이 짧을 경우, 중간생성물로서 HCHO 및 $HCOOCH_3$가 관찰되었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제21권1호
• /
• pp.65-74
• /
• 2017

Here we investigated the central processing mechanisms of mechanical allodynia and found a direct excitatory link with low-threshold input to nociceptive neurons. Experiments were performed on male Sprague-Dawley rats weighing 230-280 g. Subcutaneous injection of interleukin 1 beta ($IL-1{\beta}$) ($1ng/10{\mu}L$) was used to produce mechanical allodynia and thermal hyperalgesia. Intracisternal administration of bicuculline, a gamma aminobutyric acid A ($GABA_A$) receptor antagonist, produced mechanical allodynia in the orofacial area under normal conditions. However, intracisternal administration of bicuculline (50 ng) produced a paradoxical anti-allodynic effect under inflammatory pain conditions. Pretreatment with resiniferatoxin (RTX), which depletes capsaicin receptor protein in primary afferent fibers, did not alter the paradoxical anti-allodynic effects produced by the intracisternal injection of bicuculline. Intracisternal injection of bumetanide, an Na-K-Cl cotransporter (NKCC 1) inhibitor, reversed the $IL-1{\beta}$-induced mechanical allodynia. In the control group, application of GABA ($100{\mu}M$) or muscimol ($3{\mu}M$) led to membrane hyperpolarization in gramicidin perforated current clamp mode. However, in some neurons, application of GABA or muscimol led to membrane depolarization in the $IL-1{\beta}$-treated rats. These results suggest that some large myelinated $A{\beta}$ fibers gain access to the nociceptive system and elicit pain sensation via $GABA_A$ receptors under inflammatory pain conditions.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1923-1930
• /
• 2012

Mn-Cu계 촉매를 사용하여 암모니아 SCR(Selective catalytic Reduction)공정에서 질소산화물 제거능을 측정하였다. 반응온도를 3가지 형태로 변화시키는 조건에서 촉매에 대한 초기반응온도의 영향을 조사하였다. 200, 300 그리고 $340^{\circ}C$에서 소성한 촉매를 사용하여 온도변화에 따른 질소산화물 전환율, 그리고 $H_2$-TPR 시스템에서 온도변화에 따른 수소소모율을 측정하였다. 이산화황가스 공급유무를 조절함으로써 촉매에 대한 이산화황가스의 불활성화 효과를 파악하였다. $340^{\circ}C$ 이상의 온도에서 소성한 촉매는 열적쇼크에 의해 일부 불활성화되며, 이러한 불활성화 원인은 비표면적과 수소 전환율 결과로부터 추론할 수 있다.

• 센서학회지
• /
• 제27권4호
• /
• pp.237-241
• /
• 2018

The real-time enrichment and detection of pathogens are serious issues and rapidly evolving field of research because of the ability of these pathogens to cause infectious diseases. In general, bacterial detection is accomplished by conventional colony counting or by polymerase chain reaction (PCR) after DNA extraction. As colony counting requires considerable time to cultivate, PCR is an attractive method for rapid detection. A small number of pathogens can cause diseases. Hence, a pretreatment process, such as enrichment is essential for detecting bacteria in an actual environment. Thus, in this study, we developed a microfluidic chip capable of performing rapid enrichment of bacteria and the extraction of their genes. A lectin, i.e., Concanavalin A (ConA), which shows binding affinity to the surface of most bacteria, was coated on the surface of magnetic particles to nonspecifically capture bacteria. It was subsequently concentrated through magnetic forces in a microfluidic channel. To lyse the captured bacteria, magnetic particles were irradiated by a wavelength of 532nm. The photo-thermal effect on the particles was sufficient for extracting DNA, which was consequently utilized for the identification of bacteria. Our device will help monitor the existence of bacteria in various environmental situations such as water, air, and soil.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.108-113
• /
• 2017

The use of aluminum-based coagulants in water pretreatment is being carefully considered because aluminum exposure is a risk factor for the onset of Alzheimer's disease. Lightly burned-dolomite kiln dust (LB-DKD) was evaluated as an alternative coagulant because it contains high levels of the healthful minerals calcium and magnesium. An organic pore forming agent (OPFA) was incorporated to prepare porous granules after OPFA removal through a thermal decomposition process. A spray drying method was used to produce uniform and reproducible spherical granules with low density, since fine dolomite particles have irregular agglomeration behavior in the hydration reaction. The use of fine dolomite powder and different porosity granules led to a visible color change in raw algae (RA) containing water, from dark green to transparent colorlessness. Also, dolomite powders and granules exhibited a mean removal efficiency of 48.3% in total nitrogen (T-N), a gradual increase in the removal efficiency of total phosphorus (T-P) as granule porosity increased. We demonstrate that porous dolomite granules can improve the settling time and water quality in summer seasons for the emergent treatment of excessive algal blooms in eutrophic water.