• 한국안전학회지
• /
• 제23권3호
• /
• pp.25-29
• /
• 2008

In automotive disc brake system, friction heat is not uniformly distributed due to various reasons such as thermal expansion and imperfections in geometry. It is well known that thermoelastic distortion due to fictional heating affects the contact pressure distribution and can lead to thermoelastic instability, where the contact load is concentrated in one or more small regions on the brake disc surface. These regions then take very high temperatures and passage of hot spots moving under the brake pads can cause low frequency vibration called brake judder. This paper presents the FEM(finite element method) result for the temperature distribution of ventilated disc brake. A steady state two-dimensional model of disc brake system predicts the surface temperatures during a multi-stop driving schedule.

• Tribology and Lubricants
• /
• 제16권2호
• /
• pp.7-7
• /
• 2000

Using a coupled thermal-mechanical analysis, the dynamic distortion of the ventilated disk brakes has been presented for a high-speed train. The offset ratio between the maximum and minimum values of the thermal distortions has been analyzed as a function of a braking number. The computed FEM results show that the offset rations in radial direction are much greater than those of circumferentially distorted components. This means that the axial distortions in radial direction may dominantly produce thermally caused wears and cracks at the rubbing surfaces.

• Tribology and Lubricants
• /
• 제16권2호
• /
• pp.99-105
• /
• 2000

Using a coupled thermal-mechanical analysis, the dynamic distortion of the ventilated disk brakes has been presented for a high-speed train. The offset ratio between the maximum and minimum values of the thermal distortions has been analyzed as a function of a braking number. The computed FEM results show that the offset ratios in radial direction are much greater than those of circumferentially distorted components. This means that the axial distortions in radial direction may dominantly produce thermally caused wears and cracks at the rubbing surfaces.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.276-282
• /
• 1999

Using a coupled thermal-mechanical analysis, the dynamic distortion of the ventilated disk brakes has been presented for a high-speed train. The offset ratio between the maximum and minimum values of the thermal distortions has been analyzed as a function of a braking number. The computed FEM results show that the offset ratios in radial direction are much greater than those of circumferentially distorted components. This means that the axial distortions in radial direction may dominantly produce thermally caused wears and cracks at the rubbing surfaces.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.137-142
• /
• 2003

In automotive brake systems, the frictional heat generated can cause high temperature at the interface of rotor and pad which may deteriorate the material properties of the sliding parts and can result in brake fade. Conventionally, a pie-shaped 3-dimentional model is adopted to calculate temperature of ventilated disk using finite element method. To overcome the difficulties in preparing 3D finite element model and reduce the computational time required, the ventilated rotor is to be analyzed, in this study, as an axisymmetric finite element model in which, taking into considerations the effects of cooling passages, a homogenization technique is used to obtain the equivalent thermal properties and boundary conditions for the elements placed at the vent holes. Numerical tests show the proposed procedure can be successfully applied in practice, replacing 3-dimensional thermal analysis of ventilated disk.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.93-100
• /
• 2003

This paper describes the thermoelastic instability arising from friction heat generation in braking and proposes the finite element methods to predict the variation of temperature and thermal deformation. In a conventional disc brake analysis, heat generation is only related with wheel speed and friction material and the interface pressure between disc and pad is assumed constant. But under dynamic braking conditions, the frictional heat causes the thermoelastic distortion that leads to more concentrated contact pressure distribution and hence more and more non-uniform temperature. In this paper, to complete the solution of the thermomechanically coupled problem, the linear relation model between pressure and temperature is proposed and demonstrated in examples of a simple two dimensional contact problem. And the two dimensional model has been extended to an annular three dimensional disc model in order to consider more realistic geometry and to provide a more accurate critical speed for automotive brake systems.

• 한국융합학회논문지
• /
• 제9권1호
• /
• pp.283-289
• /
• 2018

자동차 디스크 브레이크시스템에서는 열유속 및 열변형 등과 같은 이유로 마찰열이 균일하게 분산되지 않는다. 마찰열에 의한 열탄성 변형이 접촉압력 분포에 영향을 미치게 되고, 접촉하중이 디스크 브레이크 표면상의 작은 영역에 집중되어 열탄성 불안정성을 초래 할 수 있다. 본 연구에서는 실험적 계산식과 Kao 제안한 디스크와 패드의 접촉압력에 대한 해석방법을 참고로 하여 3차원 축대칭 모델을 통하여 실제로 제동 시 발생되는 디스크와 패드의 접촉을 고려한 온도해석 및 열변형 해석을 하였다. ANSYS를 사용하여 디스크와 패드의 접촉면에서 발생하는 열탄성 불안전성 문제를 열하중과 기계적 하중으로 동시에 고려하여 해석하였다. 디스크와 패드가 직접 접촉하는 3차원 축대칭 모델을 구성하여 디스크의 마찰면 온도, 열변형, 접촉 열응력을 관찰함으로써 디스크에서 일어나는 열적 거동을 보다 정확하게 관찰하였다.