• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.683-691
• /
• 2020

A biomarker is needed to monitor and manage the health of pigs from heat stress (HS). Therefore, we investigated the effects of HS on growth performance, nutrient digestibility, and blood profiles in finishing pigs. A total of 12 finishing pigs (n = 12) were raised in thermal neutral (TN; 25℃) conditions for a 3-d adaptation period. After the adaption, 6 pigs were exposed to HS at 33℃ (HS33) for 5 d. The pigs were fed the same diet based on corn and soybean meal. Chromic oxide was added to all the diets at a level of 2 g·kg^-1 as an indigestible marker for the determination of the apparent total track digestibility (ATTD) of nutrients and amino acids. Blood samples were collected after the adaptation and heat treatment to verify the blood profiles. The HS33 pigs had a lower (p < 0.01) average daily feed intake (ADFI) and higher (p < 0.05) rectal temperature compared to the TN pigs. However, there was no difference in the ATTD of nutrients and amino acids. The HS33 pigs had reduced (p < 0.05) levels of serum glucose, non-esterified fatty acids (NEFA), total protein, albumin, and calcium compared to the TN pigs. However, the level of total bilirubin was increased (p < 0.05) in the HS pigs. In conclusion, HS reduced the feed intake and had an adverse effect on health. Altered blood profiles as a result of a negative energy balance are expected to be biomarkers of HS in finishing pigs.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.44-50
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effects of repeated porcelain firing process on the corrosion rates of the dental alloys. MATERIALS AND METHODS. Cr-Co, Cr-Ni and Pd-Ag alloys were used for this study. Each metal supported porcelain consisted of 30 specimens of 10 for 7, 9 and 11 firing each. Disc-shaped specimens 10 mm diameter and 3 mm thickness were formed by melting alloys with a propane-oxygen flame and casted with a centrifuge casting machine and then with the porcelain veneer fired onto the metal alloys. Corrosion tests were performed in quintuplicate for each alloy (after repeated porcelain firing) in Fusayama artificial saliva solution (pH = 5) in a low thermal-expansion borosilicate glass cell. Tamhane and Sheffe test was used to compare corrosion differences in the results after repeated firings and among 7, 9 and 11 firing for each alloy. The probability level for statistical significance was set at ${\alpha}$=0.05. RESULTS. The corrosion resistance was higher (30 mV), in case of 7 times firing (Commercial). On the other hand, it was lower in case of 11 times firing (5 mV) (P<.05). Conclusion. Repeated firings decreased corrosion resistance of Pd-Ag, Cr-Co and Cr-Ni alloys. The Pd-Ag alloy exhibited little corrosion in in vitro tests. The Cr-Ni alloy exhibited higher corrosion resistance than Cr-Co alloys in in vitro tests.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.1-9
• /
• 1990

Cholesteryl pentanoate $(C_{32}O_2H_{54})$ is orthorhombic, space group $P2_12_12_1$, with a = 21.930(3), b = 21.404(3), c = 6.419(5) $\AA$, Z = 4, V = 3012.8(5)$\AA$$^3$, $D_c$ = 1.04 g$cm^{-3}$, ${\lambda}(Mo\; K{\alpha}$ = 0.71069 $\AA$, $\mu$ = 0.58 $cm^{-1}$, F(000) = 1048, T = 298, R = 0.086 for 1502 unique observed reflections with I > 1.0 $\sigma$ (I). The structure was solved by direct methods and refined by cascade diagonal least-squares refinement. The C-H bond lengths and the methyl groups are fixed and refined as their ideal geometry. A comparison with other cholesteryl esters gives normal structure for the tetracyclic ring, while the tail regions of the side chain and the ester group which stands on end, show a variation from their normal values, presumably due to thermal effects. The molecules are stacked together by non-bonded van der Waals forces with the shortest intermolecular distance of 3.529 $\AA$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.20-29
• /
• 2013

Turbulent flow and combustion characteristics in a micro can combustor with a baffle plate are investigated by a Reynolds Stress Model. In order to examine the geometric effects on the turbulent combusting flow, several baffle configurations are selected. The interrelation between the flow structure and the thermal field are investigated by examing the variation of recirculation region, flame length and heat loss. For the flow mixing, the decreasing air hole is more efficient than the decrease of the fuel hole. As the fuel or air hole diameter decreases, combustion efficiency is enhanced and flame length is decreased. Additionally, as the diameter of air hole decreases, the heat loss and combustion temperature are increased, while they are reduced with decreasing the diameter of fuel hole.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.528-539
• /
• 2004

It is essential in commercial reactors that the safety limits imposed on the fuel pellets and fuel clad barriers, such as the linear power density (LPD) and the departure from nucleate boiling ratio (DNBR), are not violated during reactor operations. In order to accurately monitor the safety limits of current reactor states, a detailed three-dimensional (3D) core power distribution should be estimated from the in-core detector signals. In this paper, we propose a calculation methodology for detailed 3D core power distribution, using in-core detector signals and core monitoring constants such as the 3D Coupling Coefficients (3DCC), node power fraction, and pin-to-node factors. Also, the calculation method for several core safety parameters is introduced. The core monitoring constants for the real core state are promptly provided by the core design code and on-line MASTER (Multi-purpose Analyzer for Static and Transient Effects of Reactors), coupled with the core monitoring program. through the plant computer, core state variables, which include reactor thermal power, control rod bank position, boron concentration, inlet moderator temperature, and flow rate, are supplied as input data for MASTER. MASTER performs the core calculation based on the neutron balance equation and generates several core monitoring constants corresponding to the real core state in addition to the expected core power distribution. The accuracy of the developed method is verified through a comparison with the current CECOR method. Because in all the verification calculation cases the proposed method shows a more conservative value than the best estimated value and a less conservative one than the current CECOR and COLSS methods, it is also confirmed that this method secures a greater operating margin through the simulation of the YGN-3 Cycle-1 core from the viewpoint of the power peaking factor for the LPD and the pseudo hot pin axial power distribution for the DNBR calculation.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.44-49
• /
• 2009

In this study, we performed urrban climate simulation how both the factor of environmental land and artificial factors influence on the formation of urban temperature. With deducing quantitative data, this study could get more accurate results of the urban temperature using urban climate simulation system. In the case of natural land cover, it appeared that there are effects on the lowering temperature and the lower temperature rate appeared in the water land cover on the whole. This is considered as temperature in water land was low because of the characteristics of water land having evaporation latent heat was high and convective sensible heat was low. In case of building which has building coverage ratio, 5% with 10 floors and building coverage ratio, 15 % with 6 floors, it appears that the temperature in the water land is $33.6^{\circ}C$. In case of building coverage ratio 5%, temperature dropped when buildings has more than 4 stories. This is regarded as the size of building is bigger, the temperature dropped in relatively because of the fluctuation of the rate of solar heat from the land. At the present time, the urban temperature are higher because of various artificial factors in the city. With these results, this study supposed to be a basies of the future studies for considering both the composition of building coverate ratio and floor plan.

• Journal of Hydrogen and New Energy
• /
• v.23 no.5
• /
• pp.503-512
• /
• 2012

There is a new power generation system such as direct coal fuel cell (DCFC) with a solid oxide electrolyte operated at relatively high temperature. In the system, it is of great importance to feed coal continuously into anodic electrode surface for its better contact, otherwise it would reduce electrochemical conversion of coal. For that purpose, it is required to improve the electrochemical conversion efficiency by using either rigorous mixing condition such as fluidized bed condition or just by recirculating coal particle itself successively into the reaction zone of the system. In this preliminary study, we followed the second approach to investigate how significantly particle recycle would affect the coal conversion efficiency. As a first phase, coal conversion was analyzed and evaluated from the thermochemical reaction of carbon with air under particle recirculating condition. The coal conversion efficiency was obtained from raw data measured by two different techniques. Effects of temperature and fuel properties on the coal conversion are specifically examined from the thermochemical reaction.

• Journal of Hydrogen and New Energy
• /
• v.23 no.5
• /
• pp.455-460
• /
• 2012

This work describes the hydriding chemical vapor synthesis (HCVS) of the $MgH_2$ in a hydrogen atmosphere and the product's hydriding-dehydridng properties. Mg powder was used as a starting material to synthesize $MgH_2$ and uniformly heated to a temperature of $600^{\circ}C$ for Mg vaporization. The effects of hydrogen pressure on the morphology and the composition of HCVS-$MgH_2$ were examined by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is clearly seen that after the HCVS process, the particle size of synthesized $MgH_2$ was drastically reduced to the submicron or micrometer-scale and these showed different shapes (needle-like nanofibers and angulated plate) depending on the hydrogen pressure. It was found that after the HCVS process, the $H_2$ desorption temperature of HCVS-$MgH_2$ decreased from 380 to $410^{\circ}C$, and the minimum hydrogen desorption tempreature of HCVS-$MgH_2$ powder with needle-like shape can be obtained. In addition, the enhanced hydrogen storage performance for needle-like $MgH_2$ was achieved during subsequent hydriding-dehydriding cycles.

• Journal of Environmental Science International
• /
• v.19 no.10
• /
• pp.1257-1269
• /
• 2010

In this study the AWS was installed in three areas to analyze creation and characteristics of local wind circulation through observation. According to the result, in night time when mountain wind is well developed showed temperature in A area located in Dalbigol valley and B area adjacent with the valley was lower than C area located in the lowland of the center of city by $1.5\sim4^{\circ}C$. The wind speed was also shown two times stronger than C area. In addition, in terms of wind direction, A and B areas showed east wind consistently according to topographic shapes of Dalbigol valley with high altitude and residential sites of lowland with low altitude. Although the C area didn't show big changes in wind direction due to the effects of city structures, east wind is often seen so mountain wind from Dalbigol valley is found to have an effect at least. Through the analysis of temperature, wind speed, and wind direction, nigh time showed relatively cold mountain wind blew following Dalbigol valley, throughout residential sites and to the center of city with lowland. During the daytime, the temperature in the city with lowland and residential sites is constantly higher than A area located in Dalbigol valley, and strong wind speed following Dalbigol valley, and three areas have $200\sim300^{\circ}$ of main wind direction, so west valley wind throughout the city with lowland and following Dalbigol is clearly formed.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.65-71
• /
• 1997

We present heterojunction solar cells with a structure of metal/a-Si:H(n-i-p)/poly-Si(n-p)/metal for the terrestrial applications. This cell consists fo two component cells: a top n-i-p junction a-Si:Hi cell with wide-bandgap 1.8eV and a bottom n-p junction poly-Si cell with narrow-bandgap 1.1eV. The efficiency influencing factors of the solar cell were investigated in terms of simulation an experiment. Three main topics of the investigated study were the bottom cell with n-p junction poly-Si, the top a-Si:H cell with n-i-p junction, and the interface layer effects of heterojunction cell. The efficiency of bottom cell was improved with a pretreatment temperature of 900$^{\circ}C$, surface polishing, emitter thickness of 0.43$\mu\textrm{m}$, top Yb metal, and grid finger shading of 7% coverage. The process optimized cell showed a conversion efficiency about 16%. Top cell was grown by suing a photo-CVD system which gave an ion damage free and good p/i-a-Si:H layer interface. The heterojunction interface effect was examined with three different surface states; a chemical passivation, thermal oxide passivation, and Yb metal. the oxide passivated cell exhibited the higher photocurrent generation and better spectral response.