• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.999-1004
• /
• 2001

(1-Chloro-2,2-dicyanovinyl)benzene or 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene was reacted with 2-amino-phenol to give the model compound, hydroxy enaminonitrile, which was found to undergo thermal cyclization reaction to form the corresponding benzoxazole. This intramolecular cyclization reaction is expected to occur through nucleophilic attack to electropositive enamine carbon by ortho-hydroxy group on the phenyl ring, which is accompanied by the release of neutral malononitrile through rearrangement. From each bifunctional monomer, o-hydroxy substituted polyenaminonitrile was prepared and characterized as a new precursor polymer for well-known aromatic polybenzoxazole. Also the unusual macrocyclic dimer formation from the 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane polymerization reaction system was discussed. The thermal cyclization reactions and the properties of polymers were investigated using FT-IR and thermal analysis (DSC & TGA).

• Fibers and Polymers
• /
• 제2권2호
• /
• pp.92-97
• /
• 2001

New film forming aromatic poly(amide-imide)s containing isoindoloquinazolinedione (IQ) unit in the backbone chain (polymer XIV) have been successfully synthesized by preparing prepolymers of poly(amic acid-carbonamide). followed by subsequent thermal cyclization of the prepolymers. 4,4-Diamino-3-carbamoylbenzanilide (DACB) V has been synthesized by reduction of 3-carbamoyl-4-amino-4-nitrobenzanilide IV. The prepolymers of poly(amic-acid-carbonamide) (polymers VII and VIII) which exhibit viscosities ranging from 1.4 to 1.7 dl/g have been prepared by a condensation polymerization of monomers such as BPDA, ODA, and DACB. Polymer XIV has been obtained by thermal cyclization of the polymers VII and VIII. During the thermal cyclization reaction, imide ring structure was first introduced and then transformed to the structure of IQ unit. The thermal degradation rate of the resultant polymers were influenced by the cleavage of amide bond but the final char yield was comparable to that of poly(BPDA-ODA).

• 융복합기술연구소 논문집
• /
• 제12권1호
• /
• pp.13-18
• /
• 2022

Polyacrylonitrile was synthesized through suspension polymerization and then sieved to obtain spherical beads with a size of 200~510 ㎛. PAN was copolymerized with 2 mol% MMA monomer which is known to promote cyclization and crosslinking of nitrile group. The resonance cyclization reaction of the nitrile group in the synthesized PAN beads was observed near 170℃ with thermal analysis and FT-IR. The reaction conversion of the nitrile group in spherical beads was 23% during heat treatment, which was lower than that of the well-oriented PAN fiber used as a precursor of carbon fiber. This is because the stereo-regularity of molecular chains in the form of a random coil (spherical bead) is much lower than that of PAN fiber. It was confirmed that the compressive strength of the spherical PAN bead was greatly improved through the resonance cyclization and shrinkage according to the heat treatment, and it was also observed that the pores in PAN beads were formed after the heat treatment.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.195-205
• /
• 2016

A series of aromatic poly(hydroxyamide)s (PHAs) containing varying oligo(oxyethylene) substituents and 1,3-phenylene imide ring unit in the main chain were synthesized by the direct polycondensation reaction. The inherent viscosities of the PHAs exhibited in the range of 0.89~1.12 dL/g in DMAc or DMAc/LiCl solution. The PH-2~5 copolymers were easily soluble in strong aprotic solvents: DMAc, NMP, DMSO etc. and the PH-5 copolymer was soluble in less polar solvents such as m-creasol and pyridine with LiCl salt on heating. However, all PBOs were quite insoluble in other solvents, but only partially soluble in sulfuric acid. All copolymers (PH-2~5) could afford the flexible and tough films by solution casting. We identified that the PHAs were converted to the PBOs by the thermal cyclization reaction in the range of $200{\sim}380^{\circ}C$. The 10% weight loss temperatures and char yields of the PBOs were recorded in the range of $382{\sim}647^{\circ}C$ and 38.7~73.1% values at $900^{\circ}C$. The tensile strength and initial modulus of the PH-5 in the copolmers showed the highest values of 2.46 GPa and 49.55 MPa, respectively. The LOI values of the PHAs were in the range 26.6~29.0%, and increased with increasing 1,3-phenylene imide ring unit.

• Bulletin of the Korean Chemical Society
• /
• 제17권1호
• /
• pp.29-33
• /
• 1996

Mono-, or di-substituted chlorodicyanovinyl benzene compound was reacted with an excess amount of ethylenediamine to give corresponding imidazoline product with high reaction yield. This reaction occurs by stable imidazoline ring-forming process through nucleophilic attack of terminal amine on the enaminonitrile adduct, the reaction intermediate, toward electropositive enamine carbon, which is accompanied by the release of neutral malononitrile moiety. The similar reaction with 1,2-phenylenediamine produced stable enaminonitrile-amine adduct at lower temperature which could be cyclized intramolecularly to thermally stable benzimidazole at elevated temperature in solution or in solid state. From the difunctional compound of both reactants, poly(enaminonitrile-amine) could be prepared as a new soluble precursor polymer for well-known polybenzimidazole (PBI). The thermal cyclization reaction accompanying the release of malononitrile molecules was studied using thermalanalysis and infrared spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1089-1093
• /
• 1994

Polyesters containing enaryloxynitriles moiety have been newly prepared from p-bis[1-[4-(3-hydroxypropyl)phenoxy]-2,2-dicyano vinyl]benzene (3) and common diols with terephthaloyl chloride. The copolyesters have a good solubility in common organic solvents as well as polar aprotic solvents. They undergo a curing reaction at around 350 $^{circ}C$ and show a 50-60${\%}$ of residual weight at 500 $^{circ}C$. The enhanced thermal stabilities were due to the intramolecular cyclization or intermolecular cross-linking reaction of the dicyanovinyl group incorporated into polyester by copolymerization.

• Elastomers and Composites
• /
• 제52권2호
• /
• pp.143-153
• /
• 2017

Herein we studied the characterization of the PBO films formed via solution casting and thermal cyclization of poly(o-hyroxyamide)s(PHAs) that were synthesized by direct polycondensation of 3,3'-dihydroxybenzidine with 4,4'-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4'-(2,3-pyridinedioxy) dibenzoic acid. All the PHAs exhibited inherent viscosities in the range of 0.55~0.84 dL/g in DMAc solution. The copolymers, CPH-2-5, were partially soluble in less polar solvents like pyridine and THF. However, all the PBOs were not soluble in polar solvents, but only partially soluble in sulfuric acid. The temperatures corresponding to 10% weight loss of the PBOs with increasing content of quinoxalinedioxy unit were higher than those of the PHAs, and the char yields at $900^{\circ}C$ in $N_2$, tensile strength, and initial modulus of the PBOs were 1.1~1.3 times, 1.2~1.8, and 1.6~3.3 times higher, respectively, than those of the PHAs. The LOI value of CPB-2 was 38.5%, while that of CPB-1 was the highest at 40.0%. The LOI test confirmed that excellent flame retardants were synthesized.

• Carbon letters
• /
• 제14권1호
• /
• pp.34-39
• /
• 2013

Acrylonitrile (AN)-acrylamide (AM) copolymers were prepared by nitric acidic hydrolysis of homopolyacrylonitrile. The acrylamino group increased as a function of hydrolysis time, while crystallinity decreased. Differential scanning calorimetry and a thermal gravimetric analysis indicated that the acylamino introduced by acidic hydrolysis effectively enhanced the cyclization reaction at low temperature due to the change of the cyclization reaction mechanism. Char-yield of AN-AM copolymers also gradually increased with increasing hydrolysis time. The maximum char-yield was 49.48% when hydrolized at $23^{\circ}C$ in 65% nitric acid solution for 18 h, which was 30% higher than that of non-acidic hydrolysis of homopolyacrylonitrile. Simulation of the practical process also showed an increase of char yields, where the char yields were 55.43% and 62.60% for homopolyacrylonitrile and copolyacrylonitrile, respectively, with a hydrolysis time of 13 h.

• 폴리머
• /
• 제29권5호
• /
• pp.493-500
• /
• 2005

Poly(ethylene glycol)methyl ether(MPEG)와 dimethylphenoxy 팬던트 그룹을 갖는 polybenzoxazoles(PBOs)의 중합 전구체인 poly(o-hydroxyamides)(PHAs)를 저온 용액 중축합에 의해서 합성하였다. 합성된 중합 전구체들의 고유점도는 $0.51\~2.31$의 값을 나타내었다. 중합전구체는 FT-IR, $1H-NMR$, DSC, 그리고 TGA를 이용하여 특성을 조사하였다. MPEG단위를 갖는 PHAs는 MPEG의 분자량이 증가할수록 용매특성이 증가하는데, 특히 분자량이 1100인 MPEG를 갖는 PHA의 경우 aprotic 용매뿐만 아니라 에탄올, 메탄올, H,0에도 용해되었으나, 열적 고리화 반응에 의해 PBOs로 전환되면 어떠한 용매에도 용해되지 않았다. 그리고 MPEG만을 갖는 중합 전구체의 경우, MPEG의 분자량이 증가할수록 고리화 반응온도는 감소함을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.141-149
• /
• 2018

A series of aromatic poly(o-hydroxyamide)s (PHAs) were synthesized by the direct polycondensation reaction of 4,4′-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4′-(2,3-pyridinedioxy) dibenzoic acid with bis(o-aminophenol) including 2,2-bis-(amino-4-hydroxyphenyl)hexafluoropropane. The PHAs exhibited inherent viscosities in the range of 0.17-0.35 dL/g at $35^{\circ}C$ in a DMAc solution. These polymers showed low inherent viscosities and yielded brittle films. All the PHAs showed excellent solubility in aprotic solvents such as DMAc, DMSO, NMP, and DMF at room temperature and in less polar solvents such as pyridine and THF. However, all the PBOs were only partially soluble in $H_2SO_4$. The PBOs exhibited 10% weight loss at temperatures in the range of $537-551^{\circ}C$. The maximum weight loss temperature increased with an increase in the content of the quinoxaline-containing monomer. The residue of the PBOs showed a weight loss of 45.8-56.7% at $900^{\circ}C$ in a nitrogen atmosphere.