• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1043-1049
• /
• 2014

Density functional theory (DFT) calculations at the B3LYP/6-31G(d,p) theoretical level were performed for two novel explosives (compounds B and C) based on the guanidine-fused bicyclic skeleton $C_4N_6H_8$ (A). The heats of formation (HOFs) were calculated via isodesmic reaction. The detonation properties were evaluated by using the Kamlet-Jacobs equations. The bond dissociation energies (BDEs) for the thermolysis initiation bond were also analyzed to investigate the thermal stability. The results show that the compounds have high positive HOF values (B, 1064.68 $kJ{\cdot}mol^{-1}$; C, 724.02 $kJ{\cdot}mol^{-1}$), high detonation properties (${\rho}$, D and P values of 2.04 $g{\cdot}cm^{-3}$ and 2.21 $g{\cdot}cm^{-3}$, 9.98 $km{\cdot}s^{-1}$ and 10.99 $km{\cdot}s^{-1}$, 46.44 GPa and 59.91 Gpa, respectively) and meet the basic stability requirement. Additionally, feasible synthetic routes of the these high energy density compounds (HEDCs) were also proposed via retrosynthetic analysis.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.303-310
• /
• 2003

The phase behavior of binary blends of dimethylpolycarbonate-tetramethyl polycarbonate (DMPCTMPC) copolycarbonates and styrene-acrylonitrile (SAN) copolymers has been examined and then compared with that of DMPC/TMPC/SAN ternary blends having the same chemical components and compositions except that the DMPC and TMPC were present in the form of homopolymers. Both binary and ternary blends were miscible at certain blends compositions, and the miscible blends showed the LCST-type phase behavior or did not phase separated until thermal degradation temperature. The miscible region of binary blends is wider than that of the corresponding ternary blends. Furthermore, the phase-separation temperatures of miscible binary blends are higher than those of miscible ternary blends at the same chemical compositions. To explain the destabilization of polymer mixture with the increase of the number of component, interaction energies of binary pairs involved in these blends were calculated from the phase separation temperatures using lattice-fluid theory and then the phase stability conditions for the polymer mixture was analyzed with volume fluctuation thermodynamics.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.868-873
• /
• 2017

Natural convection is driven by the compositional buoyancy in solidification of a binary melt. The stabilities of convection in a growing mushy layer were analyzed here in the time-dependent solidification system of a near-eutectic melt cooled impulsively from below. The linear stability equations were transformed to self-similar forms by using the depth of the mushy layer as a length scale. In the liquid layer the stability equations are based on the propagation theory and the thermal buoyancy is neglected. The critical Rayleigh number for the mushy layer increases with decreasing the Stefan number and the Prandtl number. The critical conditions for solidification of aqueous ammonium chloride solution are discussed and compared with the results of the previous model for the liquid layer.

• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.188-194
• /
• 2001

Thermoplastic elastomers based on dynamically vulcanized NR/TOR/PP (rubber/PP=70/30) blends were prepared in a Haake banbury mixer. Effect of TOR content on the mechanical, dynamic mechanical and thermal stability of the rubber/plastic blends was characterized by UTM, DMTA, and TGA. On the addition of trans-polyoctylene rubber(TOR) to the rubber phase, there was a decrease in compression set and increase in tensile properties, hardness and dynamic properties as well as thermal stability or the elastomeric blends. Improvements in the properties were believed to be due to an increase in crosslink density of the rubber phase and increase in homogeneity of the blends.

• Carbon letters
• /
• v.2 no.1
• /
• pp.72-75
• /
• 2001

The performance of Li-ion system based on $LiCoO_2$ and Graphite is well optimized for the 3C applications. The charge-discharge mode, the manufacturing process, the cell performance and the thermal reactions affecting safety has been explained in the engineering point of view. The energy density of the current LIB system is in the range of 300~400 Wh/l. In order to achieve the energy density higher than 500 Wh/l, the active materials should be modified or changed. Adopting new high capacity anode materials would be effective to improve energy density.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.788-794
• /
• 2010

Camellia sinensis L. (green tea) seed oils were prepared by roasting at $213^{\circ}C$ and pressing (RP), pressing (P), and nhexane extraction (H). The physico-chemical properties of the RP, P, and H samples, including fatty acid composition, color, and sensory characteristics were analyzed. RP, P and H samples were thermally oxidized at $180^{\circ}C$, and oxidative stability was determined by DPPH, CDA, and p-AV at 0, 20, 40, 60, and 80 min. Compared to the P and H samples, RP resulted in significantly higher thermal oxidative stability according to the DPPH, CDA, and p-AV results (p<0.05). The ratio of unsaturated fatty acids to saturated fatty acids among RP, P, and H samples were significantly different (p<0.05). The oleic acid and linoleic acid contents in green tea seed oils were 58 and 23%, respectively. Hunter's color value of lightness (L) for the RP, P, and H samples was not significant. Redness (a) of RP was $3.47{\pm}0.119$ and yellowness (b) of H was $60.10{\pm}2.483$, which were significantly different. Compared to RP samples, H and P samples had the highest color and off-odor values in the sensory evaluation. RP samples showed the highest taste value and were significant overall (p<0.05). The thermal stability of RP extraction was more stable than any other method. Camellia sinensis L. seed oil extracted by RP had better sensory characteristics than other edible oils, including soybean oil, grape seed oil, and extra virgin olive oil.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.134-134
• /
• 2016

The effect of different thermal treatments on the sub-50 nm copper nanoparticles is examined in the aspects of chemical, electrical and surface morphology. The copper nanoparticles are chemically synthesized and fabricated for paste-type solution. Simple bar coating method is practiced as a deposition process to form copper thin film on a typical slide glass. Deposited copper thin films are annealed by two different routes: general tube furnace with 99.99 % Ar atmosphere and selective laser sintering process. The thermal behavior of the different thermal-treated copper thin films is compared by SEM, XRD, FT-IR and XPS analysis. In this study, the laser sintering process ensures low annealing temperature, fast working speed and ambient-accessible route. Moreover, the laser-sintered copper thin film shows good electrical property and enhanced chemical stability than conventional thermal annealing process. Consequently, the proposed laser sintering process can be compatible with plastic substrate for flexible applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.502-505
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a SiC (Silicon Carbide) thin film. SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A homeotropic alignment of nematic liquid crystal by ion beam (IB) exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is maintained by the ion beam alignment method on the SiC thin film surface until annealing temperature of $300^{\circ}C$. Consequently, homeotropic alignment effect of liquid crystal and the good thermal stability by the ion beam alignment method on the SiC thin film layer can be achieved.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.250-256
• /
• 2003

In this work, the effect of cationic initiator content on the electron-beam (EB) curing process of diglycidylether of bisphenol-A (DGEBA) resin was studied using near-infrared spectroscopy (NIRS), thermogravimetric analysis (TGA), and critical stress intensity factor $(K_{IC})$. Benzylquinoxalinium hexafluoroantimonate (BQH) were used as an initiator and its content was varied from 0.5 to 3 phr. NIRS measurements showed that the hydroxyl group of EB-cured epoxy resin was increased with increasing the BQH content. Thermal stability and $K_{IC}$ value of EB-cured epoxy resin were increased with increasing the BQH content but were decreased above 2 phr content. These results could be attributed to the decrease of the conversion and degree of crosslinking. In another word, the conversion and degree of crosslinking were restricted by the incomplete network structure from high reactivity at the BQH content above 2 phr, resulting in decreasings of thermal stability and $K_{IC}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.146-152
• /
• 2011

Thermal stability of $Ge_2Sb_2Te_5$ (GST) and $SiO_2$ doped GST (SGST) films for phase change random access memory applications was investigated by observing the change of surface roughness, layer density and composition of both films after isothermal annealing. After both GST and SGST films were annealed at $325^{\circ}C$ for 20 min, root mean square (RMS) surface roughness of GST was increased from 1.9 to 35.9 nm but that of SGST was almost unchanged. Layer density of GST also steeply decreased from 72.48 to 68.98 $g/cm^2$ and composition was largely varied from Ge : Sb : Te = 22.3 : 22.1 : 55.6 to 24.2 : 22.7 : 53.1, while those of SGST were almost unchanged. It was confirmed that the addition of a small amount of $SiO_2$ into GST film restricted the deterioration of physical and chemical properties of GST film, resulting in the better thermal stability after isothermal annealing.