• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.643-647
• /
• 1996

The dynamic behavior of hydrostatic table is represented as the theoretical model, 1-dof, 2-dof rigid body spring-damper system, and finite element model. By the experimental and theoretical methods, the validity of these models and some other dynamic behaviors, such as the effects of unbalanced load and three dimensional motion, are investigated. To make easier to consider the dynamic behavior of hydrostatic table in design process, the stiffness and damping coefficients are calculated using the simple approximation method delived from the mass flow continuity condition, and compared with experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1989

Theoretical studies have been made to analyze combined refraction diffraction of the wind waves propagating on a large scale current in water of varying depth. The governing equation for monochromatic waves was derived through splitting a mild slope equation into two equations. A numerical model is developed using finite difference scheme which is computationally very efficient for modelling large area. Numerical examples concerning the interactions between waves and rip currents over a gentle slope are presented, in which the current effects on the wave diffraction in the caustic region are closely examined.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1049-1058
• /
• 1990

Mathematical modeling equations of a parallel plate type reactor were obtained in the PECVD process in preparing hydrogenated amorphous silicon. Velocity profiles, temperature profiles and concentration profiles in the reactor were calculated from the model. The theoretical approach was attempted to obtain the deposition rate and film uniformity at different operating conditions by calculating RF discharge parameters and establishing the reaction mechanisms of a-Si:H thin film. The modelling equations are solved by a finite difference method with control volume balance. The mean electrom energy in discharge was applied to model simulation parameter. The magnitudes of the predicted deposition rate are in good aggrement with those of experiment. The results of computer simulation shows that uniform deposition profiles can.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.39-54
• /
• 1986

One of the important factors in practical welding situations is shunt effect which deteriorates weld quality due to a shunt current which flows in the exis- ting spot. Previously, this effect has not been analytically investigated, since the mechanism of shunt effect shows very complicated phenomena in the thermal and electrical behavior. In this paper this effect is extensively studied through theoretical and experimental analysis. The theoretical results obtained from a numerical analysis of the modelling of shunt effect are compared with experimental ones. Both results show good agreement and represent well the mechanism of shunt effect.

• International Commerce and Information Review
• /
• v.2 no.1
• /
• pp.25-48
• /
• 2009

With the rapid growth of e-logistics in the global logistics industry, it is important to gain further insight into this growing segment of Chinese logistics industry. The current situation in China consists of many small and medium-sized logistics firms. Furthermore, e-logistics is still relatively undeveloped in the majority of the Chinese logistics companies and presently there are still many problems unresolved. This paper attempted to review the concepts and theoretical background of e-logistics systems from previous studies. After acknowledging the essential issues related to e-logistics systems, a research model based on the theory acceptance model was designed and tested. The key factors to the e-logistics system (reliability, maintainability, software, facility and transportation) were validated through the modeling and testing process. Included in the modelling and testing process are other related factors of e-logistics process, logistics information system and added value as dependent variables in this model. The results of this study confirm that the e-logistics Process is affected by transportation, while maintainability and software factors influence logistics information system. reliability, maintainability, facility and transportation are significant factors associated with added value. This research aimed to provide theoretical and practical contribution to Chinese logistics companies and to give some insights into e-logistics system as a whole. The paper also provided some useful theoretical implication and practical guidelines for the development of e-logistics system in the chinese logistics industry.

• International Commerce and Information Review
• /
• v.11 no.2
• /
• pp.3-26
• /
• 2009

With the rapid growth of e-logistics in the global logistics industry, it is important to gain further insight into this growing segment of Chinese logistics industry. The current situation in China consists of many small and medium-sized logistics firms. Furthermore, e-logistics is still relatively undeveloped in the majority of the Chinese logistics companies and presently there are still many problems unresolved. This paper attempted to review the concepts and theoretical background of e-logistics systems from previous studies. After acknowledging the essential issues related to e-logistics systems, a research model based on the theory acceptance model was designed and tested. The key factors to the e-logistics system (reliability, maintainability, software, facility and transportation) were validated through the modeling and testing process. Included in the modelling and testing process are other related factors of e-logistics process, logistics information system and added value as dependent variables in this model. The results of this study confirm that the e-logistics Process is affected by transportation, while maintainability and software factors influence logistics information system. reliability, maintainability, facility and transportation are significant factors associated with added value. This research aimed to provide theoretical and practical contribution to Chinese logistics companies and to give some insights into e-logistics system as a whole. The paper also provided some useful theoretical implication and practical guidelines for the development of e-logistics system in the chinese logistics industry.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.427-448
• /
• 2014

At present, the time of easy oil and gas is over. Now, the largest part of fossil fuels is concentrated in the deepest levels of tectonic structures and in the sea shelves. One of the most cumbersome operations of their extraction is the bore-hole drilling. In connection with austere tectonic and climate conditions, their drivage every so often is associated with great and diversified technological difficulties causing emergencies on frequent occasions. As a rule, they are linked with drill string accidents. A key role in prediction of these situations should play methods of theoretical modelling. For this reason, there is a growing need for development and implementation of new numerical methods for computer simulation of critical and post-critical behavior of drill strings (DSs). In this paper, the processes of non-linear deforming of a DS in cylindrical cavity of a deep bore-hole are considered. On the basis of the theory of curvilinear flexible rods, non-linear constitutive differential equations are deduced. The effects of the longitudinal non-uniform preloading, action of torque and interaction between the DS and the bore-hole surface are taken into account. Owing to the use of curvilinear coordinates in the constraining cylindrical surface and a specially chosen concomitant reference frame, it became possible to separate the desired variables and to reduce the total order of the equation system. To solve it, the method of continuation the solution by parameter and the transfer matrix technique are applied. As a result of the completed numerical analysis, the critical states of the DS loading in the cylindrical channels of inclined bore-holes are found. It is shown that the modes of the post-critical deforming of the DS are associated with its irregular spiral curving prevailing in the zone of bottom-hole-assembly. The possibility of invariant state generation during post-critical deforming is established, condition of its bifurcation is formulated. It is shown that infinite variety of loads can correspond to one geometrical configuration of the DS. They differ each from other by contact force functions.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.335-343
• /
• 2024

This paper came up with the theoretical modelling of the metrology for the acoustic power using ultrasonic radiation force and showed some theoretical results. In order to do this, a scattering model for a rigid circular cone based upon the Kirchhoff approximation was made, which was followed by the calculation of acoustic power, and then, was converted to the radiation force. From these works, it provided the accuracy and limitation of the conventional method using a circular cone, and the expanded metrology modelling that can be applied to a circular cone with arbitrary apex angle. Using these, this study provided the dependence of the metrology for the acoustic power using ultrasonic radiation force on the frequency and the size of the target. As a result, the correction was yielded in the value of the acoustic power calculated by the suggested International Electrotechnical Commission (IEC) method, which needs to be added when the frequency and the size of the target was considered.

• Transactions of Materials Processing
• /
• v.11 no.2
• /
• pp.171-178
• /
• 2002

The elastic deflections of the cold forging die influence the dimensional accuracy of forged parts. The die dimension is continuously changed during the loading, unloading, and ejecting stage. In this paper, we evaluated the elastic deflections of cold forging die during the loading, unloding and ejecting stage with experimental and FEM analysis. Uni-axial strain gages are used to measure elastic strain of die during each forging stage. Strain gages are attached un the upper surface of die. A commercial F.E.M. code, DEFORM$-2D^{TM}$ is used to predict the elastic strains of die, to be compared those by experiments. Two modelling approaches are used to define the reasonable analysis method. The first of the two modelling approaches is to regard the die as rigid body over forging cycle. And then, the die stress is analyzed by loading the die with pressure from the deformed part. The other is to regard the die as elastic body from forging cycle. The elastic strain of tool is calculated and the tool is elastically deformed at each strep. The calculated results under the elastic die assumption are well agreed wish experimental data using the strain gages.

• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.15-23
• /
• 2011

This paper deals with the analysis for the operation characteristic of PV 3 phase inverter, considering the state equation through d-q coordinates transformation, and proposes an algorithm of controlling current using PI(Proportional Integral) controller to control the output and the theory algorithm of sinusoidal PWM method to design inverter. And also this paper performs PV modelling using PSCAD/EMTDC S/W which is commonly used in analysis of distribution system and confirms effectiveness of the modelling proposed in this paper by analyzing and comparing the EMTDC/PSCAD simulation result with the theoretical method.