• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.730-738
• /
• 1991

Machinable ceramics containing ${\beta}$-spodumene crystal was fabricated by melting method using domestic pyrophyllite. Raw materials were batched by molar ratio of 8:2, 7:3, 6:4, and 5:5 for fluorophlogopite and ${\beta}$-spodumene. These compounds were melted at 1450$^{\circ}C$ for 1 hr and formed in graphite mold. Base glasses were heat-treated according to 2-step schedule which was determined from DTA, XRD analysis and SEM observation. Fabricated machinable ceramics have excellent themal, chemical properties and machinability.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.83-87
• /
• 1999

The fabrication process and thermal properties of 50~71vol% SiCp/Al metal matrix composites (MMCs) were investigated. The 50~71vol% SiCp/Al MMCs fabricated by pressure infiltration casting process showed that thermal conductivities were 118~170W/mK and coefficient of thermal expansion (CTE) were 9.5~$6.5{\times}10^{-6}/K$. Specially, the thermal conductivity and CTE of 71vol%SiCp/Al MMCs were 115~156W/mK and 6~$7{\times}10^{-6}/K$. respectively, which showed a improved themal properties than the conventional electronic packaging materials such as ceramics and metals.

• 대한화학회지
• /
• 제47권3호
• /
• pp.199-205
• /
• 2003

우라닐 이온, $UO^+_2$와 Schiff-base 와의 착화합물이 글리실글라이신과 살리실알데히드, 2-히드록시-1-나프트알데히드, 2,3-디히드록시 벤즈알데히드 그리고 2,4-디히드록시 벤즈알데히드와의 축합에 의해 합성되었으며 이들 착화합물의 특성을 원소분석, 전도도 측정, 자기화율 측정, UV, IR, NMR 스펙트라와 DTA, TG, DSC 결과를 이용하여 조사하였다. 구조와 열분해 메카니즘이 제안되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1217-1219
• /
• 1995

The organization of phospholipid monolayers on a water surface was investigated by means of Maxwell-Displacement-Current(MDC)-Measuring technique. The phase transition from the gaseous phase to the gaseous-fluid phase which accompanies the polar ordering of lipid molecules was detected by the technique in the range of immeasurable low surface pressure and the molcular-area which gives the onset of the transition was determined for lipid monolayers. The vertical component of dipole moment of lipid membranes was determined from the charge flowing the rough the circuit, and we measured differential themal analysis of sample.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.411-414
• /
• 1999

70 ${\AA}$-thick oxides nitridied at various conditions were reoxidized at pemperatures of 900$^{\circ}C$ in dry-O$_2$ ambients for 5～40 mininutes. The gate oxide interface porperties as well as the oxide substrate interface properties of MOS(Metal Oxide Semiconductor) capacitors with various nitridation conditions, reoxidation conditions and pure oxidation condition were investigated. We stuided I$\sub$g/-V$\sub$g/ characteristics, $\Delta$V$\sub$g/ shift under constant current stress from electrical characteristics point of view and breakdown voltage from leakage current point of view of MOS capacitors with SiO$_2$, NO, RNO dielectrics. Overall, our experimental results show that reoxidized nitrided oxides show inproved charge trapping porperites, I$\sub$g/-V$\sub$g/ characteristics and gate $\Delta$V$\sub$g/ shift. It has also been shown that reoxidized nitridied oxide's leakage currented voltage is better than pure oxide's or nitrided oxide's from leakage current(1${\mu}$A) point of view.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.999-1004
• /
• 2001

(1-Chloro-2,2-dicyanovinyl)benzene or 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene was reacted with 2-amino-phenol to give the model compound, hydroxy enaminonitrile, which was found to undergo thermal cyclization reaction to form the corresponding benzoxazole. This intramolecular cyclization reaction is expected to occur through nucleophilic attack to electropositive enamine carbon by ortho-hydroxy group on the phenyl ring, which is accompanied by the release of neutral malononitrile through rearrangement. From each bifunctional monomer, o-hydroxy substituted polyenaminonitrile was prepared and characterized as a new precursor polymer for well-known aromatic polybenzoxazole. Also the unusual macrocyclic dimer formation from the 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane polymerization reaction system was discussed. The thermal cyclization reactions and the properties of polymers were investigated using FT-IR and thermal analysis (DSC & TGA).

• 한국군사과학기술학회지
• /
• 제22권5호
• /
• pp.644-653
• /
• 2019

With the development of themal observatory device(TOD), thermal camouflage system has been applied not only to the weapon system but also to the combat suit for soldiers. In this paper, the characteristic of thermal radiation of human body depending on the clothing material properties was analyzed through numerical simulations. The bioheat equation with thermoregulatory model was solved to obtain the realistic surface temperature of human body and these results are combined with the emissivity of human skin and clothing in order to calculate the thermal signature from the human body. According to each thermal resistance of clothing, the optimal background radiance which makes contrast radiance intensity(CRI) be lowest is different. Also, the average CRI variation per thermal resistance change is about twice as much as the case of evaporative resistance change.

• 폴리머
• /
• 제25권2호
• /
• pp.168-176
• /
• 2001

새로운 열잠재성 개시제로서 N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroan-timonate (CMH) 촉매가 diglycidylether of bisphenol A (DGEBA) 에폭시 양이온 중합계의 열적, 유변학적 특성 및 열정성에 미치는 영향에 대해 연구하였다. DSC에 의한 DGEBA/CMH 경화계의 열분석 결과, 본 경화계는 일정 온도까지 우수한 잠재성을 지닌 반응 기구임을 확인할 수 있었으며, 특히 개시제의 함량이 증가할수록 CMH의 높은 활성에 의해 DGEBA의 전환율 및 경화반응 속도가 증가하였다. 유변학적 특성은 레오미터를 사용하여 등온 조건 하, 저장 탄성율(G'), 손실 탄성율(G") 그리고 damping factor (tan $\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 실험 결과 경화 온도 및 CMH의 증가에 따른 활성의 차이로 인하여 에폭시 양이온 중합의 네트워크 구조 형성에 영향을 미쳐 겔화 시간이 단축됨을 알 수 있었다. 형성된 네트워크 구조의 열안정성은 TGA 분석을 통해 분해 활성화 에너지 및 열안정성 인자 등의 측정으로 고찰하였다.찰하였다.

• 한국진공학회지
• /
• 제13권2호
• /
• pp.72-78
• /
• 2004

TaN막 위에 magnetron sputtering으로 증착 시킨 Cu seed 막을 Cu 전해도금을 하기에 앞서 ECR plasma 장치로 전처리 세정하였다. 이때 Cu 막을 200∼$500^{\circ}C$로 변화시키면서 알곤 또는 질소 분위기에서 RTA(rapid themal annealing) 방법으로 열처리하였다. Cu seed 막 위에 전해도금법으로 형성한 Cu 막을 열처리했을 때 미세구조와 물리적 특성변화를 XRD(x-ray diffraction), EBSD(electron back-scattered diffraction), AFM(atomic force microscopy) 분석을 이용하여 조사하였다. $400^{\circ}C$보다 높은 온도에서 재결정이 일어났으며, 열처리 온도를 증가함에 따라 Cu막의 비저항이 감소하고 (111) 우선배향성이 증가하는 경향을 나타냈다. 최소의 비저항과 부드러운 표면 및 (111) 배향성이 뛰어난 Cu막을 얻기 위한 최적의 열처리 조건은 $400^{\circ}C$의 질소분위기에서 120초간 RTA처리를 하는 것으로 판단된다. 이 조건하에서 전해도금된 Cu막의 비저항(resistivity)과 표면 거칠기(surface roughness)는 각각 1.98$\mu$O-cm 및 17.77nm였다.