• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1428-1434
• /
• 2002

The ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the effect of initial spacing in surface profiles on wear and scuffing. Three kinds of surface spacing, which are closely related with initial surface micro-cracks on sliding surfaces, were produced on AISI 1045 steel surfaces using different grinding and polishing processes. Frictional forces and time to scuffing were measured, and the shape and amount of wear particles were analyzed to compare the with original surface profiles. From the tests, it was confirmed that the size of wear particles are related closely to the original spacing of the surface profile. The time to failure and amount of wear were sensitive to the surface spacing. The wider surface spacing shows much longer sliding life and smaller amount of wear than the others. Time to scuffing was increased with increasing surface pro(lie spacing. The size of wear particles increased while the wear and wear rate K were decreased with an increase in surface spacing. After the sliding tests, surface cracks of inner parts of the wear track formed due to scuffing were observed and compared among the specimens having the different surface spacing.

• 영어어문교육
• /
• 제15권4호
• /
• pp.217-235
• /
• 2009

This study aimed to explore how the Korean university students' reading motivation is related to their English (L2) reading behavior. The construct of the students' Korean (L1) and L2 reading motivation was investigated with the data obtained through the questionnaire from 120 sophomore students. A factor analysis was conducted to extract the major factors of motivation and determine the interrelationship among items in the questionnaire. As a result, 6 factors were extracted: Intrinsic Motivation for English Reading, Extrinsic Motivation 1 (Immediate Goal Orientedness), Extrinsic Motivation 2 (Integrative Orientation), Importance of L1 Reading, Intrinsic Motivation toward L1 reading, and Importance of L2 Reading Skill. The interrelatedness between the assessment results on the L2 reading behavior (reading amount, time and speed) and motivation factors was measured by correlation coefficients. It was found that Intrinsic Motivation toward English Reading was significantly related to the students' reading amount and Intrinsic Motivation toward Korean Reading had positive association with the students' reading time with statistical significance. Other factors did not show significant correlation with the students' reading behavior. In addition, the students' reading speed was significantly related to their reading amount as well, while reading time did not affect the speed gain.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.64-71
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The size of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• Tribology and Lubricants
• /
• 제17권5호
• /
• pp.399-405
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The sire of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• Journal of Chest Surgery
• /
• 제27권10호
• /
• pp.833-837
• /
• 1994

Lung contusion due to blunt chest trauma is the most common lung injury and correlated with the clinical course and prognosis. Its diagnosis by CT[Computerized Tomogram] gives a more clear and understandable three dimensional view, by which we are able to measure the volume of the contused and entire lung. Other variables are arterial blood gas, number of rib fracture, presence of hemopneumothorax, sternal fracture and clavicle fracture, number of associated non-thoracic injuries, ventilator time and presence of pulmonary complication. Percentage[%] of lung contusion are expressed as mean $\pm$ standard deviation and data analysis was performed by means of multivariate repeated measures analysis of variance to detect significant differences in variables between positive thoracic injury group and negative group. The paired t-test was used. Differences of percentage of lung contusion between groups were assessed by one-way analysis of variance. Simple linear regression was used to perform correlation analysis in the number of rib fracture and ventilator time. A p value less than 0.05 was considered statistically significant. Pneumothorax and the number of associated other injuries affect the amount of lung contusion and pulmonary complication group has more contused lung volume. Arterial blood gas study shows no correlation with the amount of lung contusion statistically. The number of rib fracture correlated with the amount of lung contusion, which also correlated with ventilator time[r=0.56, p<0.05]. In conclusion, quantitative anlysis of lung contusion by CT predicts the clinical course and treatment such as ventilator care.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.406-412
• /
• 1998

Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

• 산경연구논집
• /
• 제9권1호
• /
• pp.39-49
• /
• 2018

Purpose - This present aims to analyze the effect of export modes on initial export amount and time to export by selecting export modes among various success strategies and factors. Research design, data, and methodology - It surveyed 980 small and mid-sized venture enterprises across Korea. The export modes and its impact on exports through frequency analysis and cross analysis, and validated through a PPML(regression analysis applied the enterprise growth model) analysis. Results - Five export modes were investigated : direct export, indirect export, transfer from direct export to indirect export, transfer from direct export to indirect export, and parallel export to indirect export. It was found that SMVEs that exported directly from establishment to initial export had the shortest period, and also had the highest export price Conclusions - From a marketing point of view, it took an average of 1.6 years to switch from export directly to indirect export or directly export, and the reason for the export modes conversion was to supplement export specialists and improve export competitiveness. And the export amount and time period that SMVEs establishes and export is a significant factor in export success strategy and there has been few prior study in export modes.

• 한국산업정보학회논문지
• /
• 제15권5호
• /
• pp.53-61
• /
• 2010

인터넷은 무궁무진한 최선정보를 빠르게 교류할 수 있게 함으로, 학습자에게 풍부한 정보를 제공한다. 그러나 이러한 무한한 양의 정보제공은 모두 학습할 수 없기 때문에 학습자는 원하는 정보를 찾고 선택해야 한다. 이에 본 연구는 필터링을 통해 필요한 정보만 학습자에게 제공하여 정보의 양을 줄이고, 학습자가 요구하는 자료를 수집하여 개별적으로 제공하는 커스터마이징 학습 시스템 구현의 효과를 알아보는데 초점이 있다. 커스터마이징 학습 시스템은 학습자를 개별적으로 인식하고, 학습평가를 기반으로 학습자에게 적당한 자료를 수집 및 분석하여 제공하도록 설계되었다. 이를 통해 학습자는 해당 정보만 제공받음으로 시간대비 학습효율을 높이고 동시에 학습목표에 효과적으로 도달할 수 있다.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.8-15
• /
• 2014

For zero inventory and mixed assembly production, JIT (Just In Time) production system in Toyota and JIS (Just-In-Sequence) production system in Hyundai motor co. have been proposed in automobile production areas. Even though the production systems are popular in the areas, many subcontract companies producing part-modules for final production at a parent company suffers from excessive or shortage amount of inventory due to the time gap of production and delivery to the parent company. In this study, we propose an efficient real-time assembly sequence system applying a well-known Pareto method using Paint-In information in painting process and daily production planning information. Based on this system, a production line can estimate the shortage amount of UPH (Units Per Hour) at production line and recovers the amount before operating assembly production in the line. The proposed system provides efficiency on productivity compared with the previous system.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.904-909
• /
• 2005

To optimize the removal of free fatty acid in crude vegetable oil, response surface methodology was applied to determine the effects of five level-four factors and their reciprocal interactions on removal of free fatty acid. A total of 30 individual experiments were performed, which were designed to study reaction temperature, reaction time, catalyst amount and methanol amount. A statistical model predicted that the highest removal yield of free fatty acid was 99.8%, at the following optimized reaction conditions: a reaction temperature of 64.99$^{\circ}C$, a reaction time of 36.20 mins., an catalyst amount of 13.01% (w/v), and a methanol amount of 15% (v/v). Using these optimal factor values under experimental conditions in three independent replicates, the average removal yield was well within the value predicted by the model.