• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.49-54
• /
• 2006

Confinement is major contribution to bond strength between reinforcement steel bars and concrete. Cover thickness, bar spacing and transverse reinforcement are the key confinement factors of current provisions for the development and splices of reinforcement. However, current provisions are still too complicated to determine the values of the confinement, which need to be well delineated in the process of design. In this study, an experimental work using beam-end and splice specimens was performed to examine the effect of concrete cover on bond strength. The results of this experiment and previously available data are analyzed to identify the effects of confinement on bond strength. From this reevaluation, new provisions for the development and splices of reinforcement are proposed. The provisions suggest some limitations in the confinement index. The new provisions will allow the engineers to use a simple and yet satisfactory and appropriate method or a precise approach for design to determine the values of confinement on the calculation of development and splice lengths.

• 한국지진공학회논문집
• /
• 제19권3호
• /
• pp.121-132
• /
• 2015

The purpose of this study is to investigate the behavior characteristics of new hollow reinforced concrete (RC) bridge pier sections with triangular reinforcement details and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details and the spacing of the transverse reinforcement. Additional eight column section specimens were tested under quasi-static monotonic loading. In this study, the computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), was used. A innovative confining effect model was adopted for new hollow bridge pier sections. This study documents the testing of new hollow RC bridge pier sections with triangular reinforcement details and presents conclusions based on the experimental and analytical findings.

• 한국지반환경공학회 논문집
• /
• 제20권1호
• /
• pp.43-49
• /
• 2019

본 논문에서는 쏘일네일 설계에 위상최적화 기법을 도입하여 비탈면 높이별로 필요로 하는 보강력을 최적화하였다. 최대 비탈면 높이에서의 최적설계 결과를 보강형상밀도화하여 비탈면의 높이 변화에 따라 적용 시 쏘일네일의 수평간격의 위상최적화가 가능하였다. 단계별로 비탈면 높이를 달리하여 한계평형해석을 수행하고 쏘일네일의 수평간격이 고정값일 때 초과되는 안전율을 확인하였다. 비탈면 높이에 따른 필요 보강력을 밀도화 함으로써 최적화의 과정을 효율적으로 수행할 수 있었다. 또한 쏘일네일의 축력을 보강형상밀도에 반영하기 위하여 유한요소법을 이용하여 부재력을 반영하였다. 보강형상밀도를 산정하여 비탈면 높이별로 위상최적기법을 적용 시 비탈면 높이마다 기준안전율을 만족하는 반복적인 재해석과정을 효과적으로 감소시킬 수 있어 수평간격을 위상 최적화하는 방법이 경제적인 설계에 활용도가 높을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.492-499
• /
• 1997

Experimental research was conducted to investigate structural performance of concrete columns confined with welded reinforcement grids were tested under simulated seismic loading. The columns were subjected to constant axial compression accompanied by incrementally increasing lateral deformation reversals. The results indicate thar welded reinforcement grid can be used effectively as confinement reinforcement provided that the steel used, have sufficient ductility and the welding process employed does not alter the strength and elongation characteristics of steel. The grids improved the structural performance of columns, which developed lateral drift ratios in excess of 3% with the spacing and volumetric ratio of transverse reinforcement similar to those required by the ACI 318-95 Building Code.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.331-338
• /
• 1995

Results of an experimental of the shear and flexures strength of doubly reinforced concrete beams were summarized. A total of 24 beams was tested; 4 without web reinforcement and 20 with web reinforcement in the form of vertical stirrups. Main variables were compressive strength of concrete which was 26.88MPa and 63.4MPa, spacing of stirrups which was no-stirrups, 200, 150, 120, 100 and 90mm. Tests results were compared with stength predicted using the equations of ACI 318-89. The shear reinforcement ratio of the beams, which failed simultaneously under both flexures and shear, were 0.66pvmax for low strength concrete beams and 0.56pvmax for high strength concrete beams, respectively. Thus, ACI equations for shear reinforcement were very conservative.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.109-116
• /
• 2004

상재하중 및 보강재의 포설 간격이 보강토옹벽의 변형거동에 미치는 영향을 평가하기 위하여 일련의 모형실험을 수행하였다. 모형 보강토옹벽은 $100cm \times 140 \times 100cm$ 크기의 모형토조내에 축조하였다. 본 모형실험에서는 보강재로 인장강도 2.26t/m의 지오그리드를 사용하였고, 뒤채움흙으로는 통일분류법상 SM에 해당되는 화강풍화토를 사용하였다. 모형옹벽 축조후 상재하중 재하에 따른 벽체수평변위와 보강재의 인장변형을 측정하였다. 실험결과, 상재하중이 증가할수록 모형 보강토옹벽의 벽체변위 및 보강재 인장력이 증가하였다. 벽체 최대수평변위 및 보강재 최대 인장력은 벽체 하단으로부터 0.7H 지점에서 측정되었으며, 그 크기는 상재하중이 증가할수록 변형증가율이 커지는 비선형적인 형태를 보였다.

• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.67-75
• /
• 2003

본 연구에서는, 기존 강재스트립 보강재의 표면마찰저항력 이외에도 지지저항력의 발휘가 동시에 예상되는 새로운 형태의 버팀재 볼트 접합형 강재스트립 보강재가 제시되었으며, 이에 대한 인발거동특성을 파악하기 위해 실내인발시험을 통하여 보강재의 폭, 상재하중의 크기 및 지지저항부재 유무 등이 흙과 보강재 사이의 마찰특성에 미치는 영향을 평가하였다. 또한 수동저항부재간의 상호간섭효과 등을 분석하기 위해, 지지저항부재의 설치개수와 위치 및 간격 등을 달리한 여러 조건 하에서 시험을 실시하였고, 이와 같은 시험결과를 바탕으로 하여 버팀재의 위치와 간격비에 따른 상호간섭의 영향 등이 고려된 인발저항계수 산정식을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.306-311
• /
• 1994

Experimental research was carried out to investigate the confinement effect of concrete specimens confined by interlocking spirals subjected to the concentric axial compressive load. Main variables are the compressive strength of concrete with 2 levels(normal and high strength), the spacing of the spiral reinforcement, the yield strength of the spiral reinforcement with 2 levels and 4 different interlocking lengths. For the same volumetric ratio, the use of interlocking spirals is not as effective as the single spirals, provided that the spirals have the same diameter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.493-499
• /
• 1997

Objectives of this study is to investigate the behaviors of the confined concrete columns having different core sizes, lateral reinforcement ratios and spacing ratios by using the 3-dimensional analysis of confined concrete columns. In this paper, analyses are done by 3-D nonlinear finite element analysis considering continuum fracture and plasticity and then analysis results are compared with those of model tests. From the comparison, it is shown that the technique in this paper can be used effectively for the analysis of confined concrete columns.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.259-266
• /
• 2000

This study was conducted to investigate the seismic behavior assessment of circular reinforcement concrete bridge piers particularly with regard to assessing the displacement ductility curvature ductility response modification factor(R) and plastic hinge region etc, The experimental variables of bridge piers test consisted of transverse steel details amount and spacing different axial load levels etc. The test results indicated that reinforcement concrete bridge piers with confinement steel by the code specification exhibited suffcient ductile behavior and seismic performance. Also it is found that current seismic design code specification of confinement steel requirements may be revised.