• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.4
• /
• pp.591-597
• /
• 2009

Egg white protein (EWP) was glycated with maltopentaose (MP) through the Maillard reaction and subsequently phosphorylated by $85^{\circ}C$ dry-heating at pH 4.0 for 1 d in the presence of pyrophosphate. The functional properties of glycated, phosphorylated EWP were compared with those of native EWP and with EWP which was phosphorylated by dry-heating in the presence of pyrophosphate under the same conditions. The phosphorus content of EWP was increased to ~0.60% by phosphorylation, and to ~0.74% by glycation with MP and subsequent phosphorylation. The electrophoretic mobility of EWP increased through phosphorylation. The stability of EWP against heat-induced insolubility at pH 7.0 was considerably improved by phosphorylation alone and further by phosphorylation after glycation. The anti-ovalbumin antibody response was reduced significantly by glycation and phosphorylation, and further reduced by phosphorylation after glycation. The anti-ovomucoid antibody response was reduced significantly by glycation, phosphorylation and phosphorylation after glycation. The calcium phosphate-solubilizing ability of EWP was enhanced by both phosphorylation methods.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.244-250
• /
• 2013

We investigated green phosphorescent organic light-emitting diodes (PHOLEDs) with charge control layer (CCL) to produce high efficiency. The CCL and host material which was 4,4,N,N'-dicarbazolebiphenyl (CBP) of bipolar property can control the carrier movement in emitting layer (EML). The performance improvement by the insertion of CCL was realized to the well confined exciton and the reduced triplet exciton quenching effect in EML. Five types of devices (Device A, B, C, D, and E) were fabricated following the thickness of CCL within EML. The properties of device D using optimized thickness of CCL showed external quantum efficiency of 16.22% and luminous efficiency of 55.76 cd/A, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.281-281
• /
• 2014

The field emission properties of GaN are reported in the present study. To be a good field emitter, it requires a low work function, high aspect ratio, and strong mechanical stability. In the case of GaN, it has a quite low work function (4.1eV) and strong chemical/mechanical/thermal stabilities. However, so far, it was difficult to fabricate vertical GaN nanostructures with a high aspect ratio. In this study, we successfully achieved vertically well aligned GaN nanostructures with chemical vapor-phase etching methods [1] (Fig. 1). In this method, we chemically etched the GaN film using hydrogen chloride and ammonia gases at high temperature around $900^{\circ}C$. This process effectively forms vertical nanostructures without patterning procedure. This favorable shape of GaN nanostructures for electron emitting results in excellent field emission properties such as a low turn-on field and long term stability. In addition, we observed a uniform fluorescence image from a phosphor film attached at the anode part. The turn-on field for the GaN nanostructures is found to be about $0.8V/{\mu}m$ at current density of $20{\mu}A$/cm^2. This value is even lower than that of typical carbon nanotubes ($1V/{\mu}m$). Moreover, threshold field is $1.8V/{\mu}m$ at current density of $1mA$/cm^2. The GaN nanostructures achieved a high current density within a small applied field range. We believe that our chemically etched vertical nanostructures are the promising structures for various field emitting devices.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.4
• /
• pp.147-155
• /
• 2008

The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.322-331
• /
• 2008

In order to synthesize high-solid coatings, acrylic resins (HSAs) containing 90% solid content were first synthesized, then the synthesized HSAs were cured with a curing agent, isocyanate, at room temperature to obtain high-solid coatings. In the HSAs synthesis, conversion was in a range of $82{\sim}87%$, and viscosities and number-averaged molecular weight ($M_n$) of the HSAs were in a range of $4380{\sim}8010$ cP and $1540{\sim}1660$, respectively. From the correlation between $T_g$ value, viscosity and $M_n$, it was found that, with increasing $T_g$ value, viscosity increases rapidly and molecular weight increases slowly. From the visco-elasity measured by the pendulum method, it was found that the curing time decreased with increasing $T_g$ values. From the tests of physical properties of the coatings' film, $60^{\circ}$ specular gloss, impact resistance and heat resistance were proved to be good and pencil hardness, drying time and pot-life were proved to be poor.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.105-111
• /
• 2018

This paper presents the analysis of image quality with FHD(Full HD) resolution camera equipped DIC(Digital Image Correlation) platform for the measurement of the architectural structure's relative displacement. DIC platform was designed based on i.MX6 of Freescale. Displacement measurement based on DIC method, the error is affected by image quality factors as pixel number, brightness, contrast, and SNR[dB](Signal to Noise Ratio). The effect were analyzed. The displacement of ROI(Region Of Interest) area within the image was measured by sub-pixel units based on DIC method. The non-contact telemetry property of DIC method, it can be used to long distance non-contact measurement. The various displacement results was measured and analyzed with the image quality factor adjustment according to the distance(25m, 35m, 50m).

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.274-280
• /
• 2005

A chitinase was purified from the culture supernatant of Paenibacillus illinoisensis KJA-424 by protein precipitation, DEAE-Sephadex anion-exchange chromatography, and Sephadex G-150 gel filtration. The molecular weight of the purified chitinase was 54 kDa on SDS-PAGE and activity staining. Optimal pH and temperature were pH 5.0 and 60$^{circ}$C, the presence of 10 ruM Ag$^{+}$ and Hg$^{2+}$ inhibited the activity by $92.1/%$ and $97.7/%$, and the K$_{m}$ and V$_{max}$ values were 1.12 mg chitin mrl and 1.48$\mu$mol GlcNAc min$^{-1}$, respectively. The enzyme hydrolyzed tetramer to dimer, pentamer to dimer and trimer, and hexamer to dimer, trimer and tetramer, indicating an endo-splitting mechanism. The chitinase had no hydrolytic activity toward dimer and trimer. The chitinase inhibited the mycelial growth of Rhizoctonia solani, suggesting an antifungal property.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.524-534
• /
• 2010

Glass was fabricated using refused coal ore obtained from the Dogye coal mine in Samcheok. We additionally used soda ash and calcium carbonate to make a glass with the chemical composition of soda-lime glass, and we also used white, brown, and green glass cullet to make various kinds of colored glass. Transparent glass was fabricated by melting batch materials including refused coal ore at $1550^{\circ}C$ for 1 hr in an electrical furnace. The light transmittance and color chromaticity were measured by a UV/VIS/NIR spectrometer. Transparent glass with a light transmittance of over 80% was fabricated using normal refused coal ore and white glass cullet. Various kinds of colored glass with a light transmittance of 30-80% were fabricated using refused coal ore and brown or green glass cullet. The light transmittance of the mixed color glass samples, fabricated using normal refused coal ore and brown glass cullet and green glass cullet, indicated 30-47%, a relatively low value, in the condition of a cullet ratio of 20-50%. The characteristics of the color chromaticity of the glass samples were indicated in a chromaticity diagram by x-coordinates, y-coordinates, Y (lightness). The values of x-coordinates and y-coordinates were moved with a regular directional property according to the kind and amount of glass cullet. Therefore, we concluded that refused coal ore can be used for raw materials of color glass products like art glass and glass tile.