• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.20-31
• /
• 2024

Purpose: Research and development of high-strength concrete enables high-rise buildings and reduces the self-weight of the structure by reducing the cross-section, thereby reducing the thickness of beams and slabs to build more floors. A large effective space can be secured and the amount of reinforcement and concrete used to designate the base surface can be reduced. Method: In terms of field construction and quality, the effect of reducing the occurrence of drying shrinkage can be confirmed by studying the combination of low water bonding ratio and minimizing bleeding on the concrete surface. Result: The ease of site construction was confirmed due to the high self-charging property due to the increased fluidity by using high-performance water reducing agents, and the advantage of shortening the time to remove the formwork by expressing the early strength of concrete was confirmed. These experimental results show that the field application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher can be expanded in high-rise buildings. Through this study, we experimented and evaluated whether ultra-high-strength concrete with a strength of 130 MPa or higher, considering the applicability of high-rise buildings with more than 120 floors in Korea, could be applied in the field. Conclusion: This study found the optimal mixing ratio studied by various methods of indoor basic experiments to confirm the applicability of ultra-high strength, produced 130MPa ultra-high strength concrete at a ready-mixed concrete factory similar to the real size, and tested the applicability of concrete to the fluidity and strength expression and hydration heat.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• Journal of the Korean Society for Library and Information Science
• /
• v.7
• /
• pp.89-195
• /
• 1980

The advanced developing countries including Korea are assumed to have reached a developmental stage which necessitates them to formulate and implement a plan for a national information network. Most of the governments in the advanced developing countries are well aware of the necessity for such a plan and some of them have actually commenced their studies on the feasibility of a national network of their own hoping to achieve maximum utility of their limited information resources. Two urgent problems facing planners in the design of a national information network are identified. One is lack of an optimum organisational model to enable them to meet their own situations, and the other is lack of a guideline to help designers evaluate the alternative structures and models when they are available. In resolving these two problems, network planners in the advanced developing countries would benefit from the achievement of the objectives of the present study. The major objective is to elicit and describe common information needs, desires and value of the people using information, and other common factors which are responsible for the present information services in the advanced developing countries and which have implications for the basic structure of the national information network. The value of this study is to aid administrators in Korea and those in the other advanced developing countries who are responsible for making national policies and who are now beginning to recognise the need for information services with the planning of economic and social development so as to enable all the groups in the community to have access to the information which are essential for decision making, research work, studies and even for recreational reading. This recognition will hopefully give them a rational basis for formulating right policies on information services. The methodology utlised for collecting the required data in this study falls under the category of observation and largely consists of the two techniques: literature review and postal questionnaire. Background information on the individual advanced developing: countries was gathered from monographic and periodical literature. and country reports presented at the various international conferences were analysed for other relevant data. For most of the data needed for the present study, a questionnaire on 'Library and Information Services as They Are Available in the Selected Countries' was formulated. This questionnaire was designed to be completed without help, by an expert who was well informed of the library and information services in his or her country. The questionnaire was intended to look in details at what information services in the advanced developing countries were doing-whom they were serving, in what way, and how well and establish to what extent they were meeting the nation's information requirements. It was also intended to ascertain the respondents' ideas on possible future developments in information provision in their countries, that is, in the advanced devanced developing countries. The questionnaire was posted to a total of 63 natinal librarians, directors of national information centres and those of other major libraries or information centres in 21 selected countries. Complete usable responses were received from 34 persons in 14 countries. In order to identify common characteristics of the information needs and desires in the advanced developing countries and the present situation of the information services to meet them, and the requirements and constraints peculiar to those countries which bought to be considered in the design of a national information network for advanced developing countries, an individual report on the current status of information activities for each of the fourteen countries chosen for this study, was presented. The procedure used was to arrange the data acquired in the questionnaire responses and other sources, in the form of fifteen country reports to be summarised by cross-section characteristics later.