• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.159-164
• /
• 2000

In this paper a new type refrigerant liquid subcooling system which adopts ice storage system is proposed. And the cycle characteristicso of a new system was investigated. Since this system subcools a refrigerant in the daytime using the ice storaged by electric power in the night it is high efficiency heat pump system which have the merit of ice storage system and possible to improve the performance of the heat pump. The running to storage the ie was carried out for 10 hours in the night and th evaporating temperature was set on $-5^{\circ}C.$ Subcooling operation stayed as 430^{\circ}C$ subcooling degree and perfomed till the water in the IST(Ice storage tank) was reached $12^{\circ}C$. The experimental result showed that a new system was superior to the existing refrigeration system generally. The total cooling capacity of a new system was about 11% higher than that of the existing refrigeration system. And the COP of a new system was improved by 22% compared to the existing refrigeration system.

• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.49-58
• /
• 2009

This study was done to provide a case model with a concept of environmental integration based on the water circulation system. Area of interest (AOI) is the Eastern Pangyo New Town area, which has several advantages in adaptation of a water circulation system. The AOI has a potential of maintaining water resources, and has a good condition to construct the water circulation system. Research done for the purpose of the establishment of the water circulation system in the Eastern Pangyo New Town shows the following. The main sources of water supply in the water circulation system in the Eastern Pangyo New Town is from two subway stations and runoff water, along with the natural water flowing from the mountains, rain water, and stream water. It was determined that more than 35,000 tons of water would be needed for the creation of water circulation system at the Eastern Pangyo. If the creation of infrastructure for the use of runoff and rain water as well as the periodic management can be provided, it can serve as the new model for a new city with water circulation system. In addition, since the Eastern Pangyo New Town water circulation system can secure enough amount of water resources, natural drainage system (NDS) in which it can be in dry condition in non-rainy days, is applied and connected to the typical waterways. Such water circulation system has many positive aspects including the wise use of water resources, and providing wild Life animals corridors and habitats. Also, the water circulation system can lead to the environmental education to the residents and visitors on environmental awareness of the water circulation system and their environment.

• 한국의료질향상학회지
• /
• 제27권2호
• /
• pp.30-44
• /
• 2021

Purpose: The aim of this study was to investigate the changes in perception of the New Diagnosis-Related Group (DRG)-based payment system, make overall evaluation after participation, and examine opinions on further policy improvement among employees of a public hospital participating in the pilot project in Korea. Methods: We investigated changes in perception of the New DRG-based payment system before and after participation in the pilot project using a qualitative research method. We conducted individual in-depth interviews with the management and healthcare professionals and Focus Group Interviews (FGIs) with the staff in the nursing and administrative departments. Results: Before implementing the pilot project of the New DRG-based payment system, the management was in favor of participating in the pilot project, whereas the healthcare professionals were strongly opposed to participation in the pilot project, and the staff in the nursing and administrative departments were slightly opposed to participation. After implementing the pilot project, there were remarkable changes in the perception of the New DRG-based payment system among healthcare professionals and the administrative staff. Healthcare professionals' perception was altered in a positive way, while the administrative staff's perception of the system became negative. Conclusion: There were no restrictions on clinical practice or deterioration of quality of care observed in association with the participation in the New DRG-based payment system. However, certain unintended consequences of the New DRG-based payment system may arise as well. Therefore, the government needs to examine the problems identified in this study to reflect on and improve the New DRG-based payment system for stable expansion.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.922-930
• /
• 1999

This paper describes a new 14-CPU real-time distributed automatic gauge control (AGC) system for POSCO's No. 2 Hot Strip Mill at Pohang Works. The new AGC system has adopted gaugemeter AGC, Monitor AGC, and roll gap disturbance compensators. The computer system for the new AGC system has been developed based on VMEbus computer systems and a commercial real-time operating system. A VMEbus computer system is also used for the position servo control of hydraulic cylinders. All the application programs and input/output signals have been reasonably distributed over the control computer systems for the maximum reliability and effectiveness of the system. The new AGC system has been successfully used for the No. 2 Hot Strip Mill.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.914-915
• /
• 2017

Importance and usage of the recommender system increases with the increase of information. The accuracy of the system recommendation primarily depends on the data. There is a problem in recommender systems, known as cold start problem. The lack of data about new products and users causes the cold start problem, and the system will not be able to give correct recommendation. This paper deals with cold start problem by comparing product specification and the review of the resembled products. The user, who likes the resembled product of the new one has more probability of taking interest in the new product as well. However, if a user disagreed with resembled product due to some reasons which the user mentioned in the reviews. The new product overcomes that issue, so the user will greatly accept the new product. Therefore, the system needs to recommend new product to those users as well, in this way the cold start problem will get resolved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.150-157
• /
• 1999

As the customer demands thickness quality stricter, new techniques of automatic thickness control(AGC), is adopted to continuous cold rolling mills. The cold rolling mills of Pohang Works have revamped the existing conventional AGC system that control the thickness at all-stands automatically by the mass flow AGC based on the measurement of strip-speed and thickness between mill stands. The No. 2 Cold Rolling Mill be has adopted the New AGC system since Oct. 1995, and The No.1 Cold Rolling Mill since June. 1999. Thanks to the New AGC system, precise control of thickness is possible not only at constant rolling speed region, but also during line speed up and down. This report describes application techniques of the New AGC system and performance of the system.

• 한국중재학회지:중재연구
• /
• 제20권3호
• /
• pp.121-145
• /
• 2010

In the past, ADR has not been used as frequently in Japan as it has in other parts of the industrialized world. However, though litigation is still the most utilized vehicle of dispute resolution by Japanese financial institutions, this will be changing. The New Financial ADR system, which was created by a June 2009 amendment to the Financial Instruments and Exchange Act, is meant to deal with every stage of financial-related disputes and, as such, strives to resolve disputes before they become significant and acts to ameliorate any post-ADR issues that may remain, thereby completing the FIEA's purpose to protect investors. Since the foundation of the New Financial ADR system applies to all related industries, new provisions were set out in 16 business related acts, such as the Banking Act, the Insurance Business Act, and FIEA itself. October 2010 will mark the formal introduction of a new system of financial ADR in Japan. New Financial ADR in Japan will be modeled on the Financial Ombudsman Service in the United Kingdom, but will not feature one comprehensive dispute resolution system in which one dispute resolution institution covers all disputes in the financial field. The New Financial ADR system is merely one step towards a foundation of comprehensive financial ADR such as FOS. It must be noted, however, that this all important first step was over seven years in the making, involving a great deal of discussion, debate, and compromise amongst many parts of Japanese government, business, and society. The New Financial ADR system grants participating parties the ability to stop the clock on any statute of limitations which may correspond to any future possible court cases related to the dispute,13 and further grants the ability to suspend related court proceedings while the parties are utilizing the New Financial ADR system. In addition, where financial institutions have not accepted dispute resolution proceedings or have not accepted a special conciliation proposal, the Ministry of Finance may issue an order compelling compliance if it is found that certain actions are necessary to ensure the appropriate operations of a financial institution's business. In Japan, as best practices have not yet been created.

• Journal of the Korean Data and Information Science Society
• /
• 제21권1호
• /
• pp.185-194
• /
• 2010

In recommender systems which are used widely at e-commerce, collaborative filtering needs the information of user-ratings and neighbor user-ratings. These are an important value for recommendation in recommender systems. We investigate the in-formation of rating in NBCFA (neighbor Based Collaborative Filtering Algorithm), we suggest new algorithm that improve prediction accuracy of recommender system. After we analyze relations between two variable and Error Value (EV), we suggest new algorithm and apply it to fitted line. This fitted line uses Least Squares Method (LSM) in Exploratory Data Analysis (EDA). To compute the prediction value of new algorithm, the fitted line is applied to experimental data with fitted function. In order to confirm prediction accuracy of new algorithm, we applied new algorithm to increased sparsity data and total data. As a result of study, the prediction accuracy of recommender system in the new algorithm was more improved than current algorithm.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.439-450
• /
• 1997

Most of Korean feed mill has a pregrind system which was suitable for the processing of less number of ingredients and finished products, and good for the mash type feed product. But industries has been changed in production volume and cost, and also from mash to further processed products such as pelleted and extruded. Therefore, Korea feed industries now should change the process, especially the grinding system from the current pregrind to other grind system, but this change will cost a lot of investment and also loosing current grinding system, and should have production shut down during the construction period. To solve these problems, combined grinding system based on a new model mill has been developed. The combined grind system is combination of pregrind and postgrind system, which has the advantages of those two grind systems, and also which can allow to utilize existing pregrind system continuously without any production interruption due to new postgrind system construction. This newly developed model has been applied to the feed mill expansion project of `B`feed company in 1994, and it was very successful application and showed excellent results as we intended. The new model mill, combined grind system applied can save fixed asset investment because old pregrind system can be used as is, and also can reduce production cost and improve product quality. And the possibility of critical production shut down can be much lowered. Within this new grinding model development, multi-screen combination system has been developed for the better grinding texture quality and safer operation. This new model mill with combined grind system will be applied by most feed manufacturing plant and may enhance their production competitiveness, and the further study and development should be continued.

• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.181-196
• /
• 1998

The aim of this research is the development of a CAPP system which can use the old experience of process planning to generate a process plan for a new part and learn from its own experience using the concept of stratified case-based reasoning(CBR). A process plan is determined through the hierarchical process planning procedure that is based on the hierarchical feature structure of a part. Each part and case have their own multiple abstractions that are determined by the feature structure of the part. Retrieving the case in stratified case-based process planning is accomplished by retrieving the abstraction that is most similar to the input part abstraction in each abstraction level of the case-base. A new process plan is made by the adaptation that translates the old case's process plan into the process plan of a new part. Operations, machines and tools, setups and operation sequence in each setup are determined in the adaptation of abstraction using some algorithms and the reasoning based on knowledge-base. By saving a new part and its process plan as a case, the system can use this new case in the future to generate a process plan of a similar part. That is, the system can learn its own experience of process planning. A new case is stored by adding the new abstractions that are required to save as the new abstraction to the existing abstractions in the case-base.