• 한국콘텐츠학회논문지
• /
• 제15권2호
• /
• pp.499-506
• /
• 2015

마찰속도란 벽면 가까이의 흐름에서 벽면의 마찰 응력과 밀도로 정의되는 속도의 차원을 갖는 양이다. 또한 마찰속도는 바닥 흐름에서 전단력을 나타내는 수리학적 매개변수이다. 게다가 개수로 설계나 하천, 해안에서 유사 및 물질의 거동을 파악하는데 정확한 마찰속도의 산정이 매우 중요하며 주 흐름방향의 혼합계수를 결정하는데 필수적인 요소이다. 이러한 마찰속도를 산정하는 방법들은 하상경사를 이용하는 방법, 레이놀즈 응력분포를 이용하는 방법, 점성저층에서 평균유속의 선형법칙을 이용하는 방법, 벽 전단 응력의 직접적 측정방법 등이 있다. 본 연구에서는 기존 방법과 달리 확률통계 기법에 사용되는 엔트로피 개념에 접목하여 새로운 마찰속도공식을 제안하였고, 이를 검증하기 위해 Song의 실측 실험데이터를 이용하였다. 제안한 공식과 마찰속도 공식에 의해 산정된 마찰속도의 결정계수는 0.999-1.000로 잘 일치한 것으로 분석되었다.

• 한국지반공학회논문집
• /
• 제21권3호
• /
• pp.65-77
• /
• 2005

본 연구에서는 계단식 보강토 옹벽에 대한 측소 모형실험 수행하고 그 결과를 토대로 계단식 보강토 옹벽의 파괴 메카니즘을 분석하였다. 보강토 옹벽의 모형설험은 5m 높이의 현장옹벽에 대해 상사법칙을 적용하여 축소$\cdot$모사하였으며 상사법칙 적용 결과에 따라 보강재를 선택하여 실험을 실시하였다. 또한, 파괴 메카니즘 분석을 위해 자중에 의한 파괴를 성공적으로 유도하였다. 실험결과를 토대로 보강토 옹벽의 상$\cdot$하단 옹벽의 이격거리와 보강재 길이가 파괴 양상에 미치는 영향을 분석하였으며 아울러 현재 적용되고 있는 설계기준의 타당성 검토하였다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1652-1660
• /
• 1990

본 연구에서는 원관내에서 복사에 관여하는 고온의 가스유동에 의한 복사열전 달과 대류열전달간의 상호작용에 대해 실험과 수치해석을 통하여 고찰하고자 한다. 실험으로는 프로판가스의 화염생성에 의한 속도, 온도 및 벽면에서의 열유속분포를 측 정하고, 수치적으로는 냉염(cold flame) 상태서 측정한 난류요동성분과 연소시의 입구 속도와 온도를 초기조건으로 하여 밀도와 점성계수의 온동에 따른 변화를 고려한 K-.epsilon. 모델과 구조화근사법 및 최근에 개발되어 사용되기 시작한 Weighted Sum of Gray Gas- es모델을 사용하여 속도, 온도 및 열유속 분포를 계산하여 수치해석의 결과와 실험결 과를 비교함으로써 모델의 타당성을 검증하고, 복사에 의한 열전달량과 대류에 의한 열전달량을 분리하여 각 모드가 온도분포 및 열유속분포에 미치는 영향을 고찰하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.457-462
• /
• 2011

The sidewall of the HEMU-400x consists of two parts. One is the multi-layered structure including aluminium extruded panel and the other is the double glazed window. When the train runs in a tunnel, the equivalent sound insulation performance of the side wall significantly influences the internal noise levels. In aspect of the sound insulation strategy, it is important to make two parts have similar performance. In this study, the intensity sound transmission loss (ITL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance of the two parts in respect of the weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy is investigated to reduce the interior noise.

• 한국해양공학회지
• /
• 제19권4호
• /
• pp.9-14
• /
• 2005

In the present paper, the wave absorbing performance of the fully submerged horizontal porous plates has been investigated, numerically and experimentally. The submerged porous system is composed of multi-layered horizontal porous plates that are clamped at the vertical setwall, which are slightly inclined and placed vertically, in parallel, with spacing. The hydrodynamic interaction of incident waves with the rigid porous multi-layered plates was formulated within the context of linear wave-body interaction theory and Darcy's law. In order to validate the effectiveness of the present computing code, the numerical results were compared with the analytical and experimental results. It is found that triple horizontal porous plates with slight inclination, if properly tuned for wave energy dissipation against the standing waves in front of the vertical wall, can have high performances in reducing the reflected wave amplitudes against the incident waves over a wide range of wave frequency.

• 한국주거학회논문집
• /
• 제12권3호
• /
• pp.75-83
• /
• 2001

The deteriorted high-rise apartments make a social problem in now days. As a result, and new alternative plan for deteriorted high-rise apartments such as the remodeling concept must be considered. This study aims to develop the remodeling items which is the guide lines when remodeling of the apartment will be conducted. Thorough the case studies of maintenance and repair status of the deteriorted apartments in seoul, reasonable guidelines for selection of remodeling items were developed. Physical maintenance items includes those that need major repair activity like wall painting, water proof roof, change/repairs/implement of heating system, boiler, city gas pipelines, cold and hot water pipes, elevators, cleaning of water tanks. The period of repair is shorter than the durable year of law or codes. As a result of the study, basic maintenance items and actual repair period were proposed. This result will be the basic guidelines for remodeling items.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.21-27
• /
• 1999

In this paper, tile characteristics of flow resulting from the configurations of piston head and intake-port of the cylinder in a gasoline-direct-injection engine are investigated numerically. Calculations are carried out from intake process to the end of compression. GTT code which includes the third order upwind Chakravarthy-Osher TVD scheme and κ-ε turbulence model with the law of wall as a boundary condition. As a result, a piston head with a smaller radius of curvature and larger radius gives stronger reverse tumble. It is also shown that as the maximum tumble ratio increases by the configuration of the intake-port the tumble ratio at the end of compression stroke increases. It is concluded that flows at the end of compression stroke can be controlled by the optimum design of intake-port and piston head.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2737-2742
• /
• 2007

Strong wind flow around a building complex was numerically studied by LES. The original motivation of this work stemmed from the efforts to develop a risk assessment technique for windstorm hazards. Lagrangian-averaged scale-invariant dynamic subgrid-scale model was used for turbulence modeling, and a log-law-based wall model was employed on all the solid surfaces including the ground and the surface of buildings to replace the no-slip condition. The shape of buildings was implemented on the Cartesian grid system by an immersed boundary method. Key flow quantities for the risk assessment such as mean and RMS values of pressure on the surface of the selected buildings are presented. In addition, characteristics of the velocity field at some selected locations vital to safety of human beings is also reported.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.133-139
• /
• 2011

In this paper, Based on Two-dimensional Flow Theory, adopting quasi-orthogonal method and point-by-point integration method to design the impeller of the low specific speed centrifugal pump by code, and using RANS (Reynolds Averaged N-S) Equation with a standard k-${\varepsilon}$ two-equation turbulence model and log-law wall function to solve 3D turbulent flow field in the impeller of the low specific speed pump. An analysis of the influences of the blade profile on velocity distributions, pressure distributions and pump performance and the investigation of the flow regulation pattern in the impeller of the centrifugal pump are presented. And the result shows that this method can be used as a new way in low speed centrifugal pump impeller design.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2015

An analytical model of liquid sloshing is developed to consider the energy-loss effect through a partially submerged porous baffle in a horizontally oscillating rectangular tank. The nonlinear boundary condition at the porous baffle is derived to accurately capture both the added inertia effects and the energy-loss effects from an equivalent non-linear drag law. Using the eigenfunction expansion method, the horizontal hydrodynamic force (added mass, damping coefficient) on both the wall and baffle induced by the fluid motion is assessed for various combinations of porosity, submergence depth, and the tank's motion amplitude. It is found that a negative value for the added mass and a sharp peak in the damping curve occur near the resonant frequencies. In particular, the hydrodynamic force and free surface amplitude can be largely reduced by installing the proper porous baffle in a tank. The optimal porosity of a porous baffle is near P=0.1.