• 한국표면공학회지
• /
• 제34권1호
• /
• pp.62-67
• /
• 2001

Green technology is being developed up to a point that is feasible not only in an environmental sense, but also in an economical viewpoint. This paper introduces two case studies that applied $CO_2$ technology into nuclear industry. 1) Nuclear laundry : A laundry machine that uses liquid and supercritical $CO_2$ as a solvent for decontamination of contaminated working dresses in nuclear power plants was developed. The machine consists of a 16 liter reactor, a recovery system with compressors, and storage tanks. All $CO_2$ used in cleaning is fully recovered and reused in next cleaning, resulting in no production of secondary nuclear waste. Decontamination factor is still lower than that in the methods currently used in the plant. Nuclear laundry using $CO_2$ looks promising with technical improvements-surfactants and mechanical agitation. 2) $CO_2$ nozzle decontamination : An adjustable nozzle for controlling the size of dry ice snow was developed. Using the developed nozzle, a surface decontamination device was made. Human oils like fingerprints on glass were easy to remove. Decontamination ability was tested using a contaminated pump-housing surface. About 40 to 80% of radioactivity was removed. This device is effective in surface-decontamination of any electrical devices like detector, controllers which cannot be cleaned in aqueous solution.

• 농촌의학ㆍ지역보건
• /
• 제34권2호
• /
• pp.168-174
• /
• 2009

현대인이 편리하게 이용할 수 있는 자동판매기는 그 수요가 늘어나고 있는 추세이나 위생 실태 및 인식에 대한 조사가 드물다. 이를 파악하기 위하여 일 개 중소도시의 음료 자동판매기를 조사하였다. 2008년 10월에 경상북도 일개 중소도시 내 다양한 장소에 위치한 자동판매기 12대에서 밀크커피와 율무차를 각각 1잔씩 채취하여 바로 온도를 측정한 후 시료를 시험관에 옮겨 동국대학교 의과대학 미생물학교실에서 미생물 검사를 실시하였다. 동일 지역 대학생 81명을 대상으로 자체적으로 개발한 설문지로 설문 조사를 시행하였다. 밀크 커피와 율무차의 온도 측정에서 각각 6대(50.0%)와 8대(66.7%)가 기준치에 미달하였다. 두 음료 모두 기준치에 미달한 경우는 5대(41.7%)였다. 미생물 검사 중 일반세균수 항목에서 밀크 커피에서는 모두 기준치를 만족하였지만, 율무차의 경우 9대(75.0%)에서 기준치를 만족하지 못하여 상대적으로 율무차의 위생 상태가 불량함을 알수 있었다. 대장균군 항목에서는 모두 기준치를 만족하였다. 자동판매기 인식에 관한 설문 조사에서 깨끗할 것이라고 응답한 경우가 2명(2.7%)이었으며, 이외에는 보통 이하로 응답하여 자동판매기의 위생 상태에 관한 부정적인 인식을 확인할 수 있었다. 자동판매기 관련 위생법을 인지하고 있는 경우는 27명(33.3%)으로 이를 인지하지 못하는 경우가 많았다. 이번 연구에서 평상시에 우리가 쉽게 접하는 음료 자동판매기의 위생 상태가 미흡한 점과 이에 대한 부정적 인식을 확인할 수 있었다. 일상생활의한 부분으로 자리잡은 자동판매기와 관련된 조사가 앞으로 활발히 이루어져 현실적인 변화가 있어야 할 것이다.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.148-154
• /
• 2015

48-V ISG (Integrated Starter Generator) system has attracted attention to improve the fuel efficiency of ICE (Internal Combustion Engine) vehicle. One of the key components that significantly affects the cost and performance of the 48-V ISG system is the motor. In an ISG motor, the core and copper loss make the motor efficiency change because the motor has a broad driving operated range and more diverse driving modes compared with other motors. When designing an ISG motor, the selection of an electrical steel sheet is important, because the electrical steel sheet directly influences the efficiency of the motor. In this paper, the efficiency of the ISG motor, considering core loss and copper loss, is analyzed by testing different types of electrical steel sheets with respect to the driving speed range and mode. Using the results of a finite element method (FEM) analysis, a method to select the electrical steel sheet is proposed. This method considers the cost of the steel sheet and the efficiency according to driving mode frequency during the design process of the motor. A wound rotor synchronous machine (WRSM) was applied to the ISG motor in this study.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.61-70
• /
• 2001

This paper introduces a new digitization method with sensor fusion for shape measurement in reverse engineering. Digitization can be classified into contact and non-contact type according to the measurement devices. Important thing in digitization is speed and accuracy. The former is excellent in speed and the latter is good for accuracy. Sensor fusion in digitization intends to incorporate the merits of both types so that the system can be automatized. Firstly, non-contact sensor with vision system acquires coarse 3D point data rapidly. This process is needed to identify and loco]ice the object located at unknown position on the table. Secondly, accurate 3D point data can be automatically obtained using scanning probe based on the previously measured coarse 3D point data. In the research, a great number of measuring points of equi-distance were instructed along the line acquired by the vision system. Finally, the digitized 3D point data are approximated to the rational B-spline surface equation, and the free-formed surface information can be transferred to a commercial CAD/CAM system via IGES translation in order to machine the modeled geometric shape.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.22-28
• /
• 2007

Liquefied gas vaporizer is a machine to vaporize liquefied gas such as liquid nitrogen($LN_{2}$), liquefied natural gas(LNG), liquid oxygen($LO_{2}$) etc. For the air type vaporizer, the frozen dew is created by temperature drop (below 273 K) on vaporizer surface. The layer of ice make a contractions on vaporizer. The structure analysis on the heat transfer was studied to see the effect of geometric parameters of the vaporizer, which are length 1000 mm of various type vaporizer. Structure analysis result such as temperature variation, thermal stress and thermal strain have high efficiency of heat emission as increase of thermal conductivity. As the result, Frist, With-fin model shows high temperature distribution better than without-fin on the temperature analysis. Second, Without-fin model shows double contractions better then with-fin model under the super low temperature load on the thermal strain analysis. Third, Vaporizer fin can be apply not only heat exchange but also a stiffener of structure. Finally, we confirm that All model vaporizer can be stand for sudden load change because of compressive yield stress shows within 280 MPa on thermal stress analysis.

• 한국수정란이식학회지
• /
• 제10권3호
• /
• pp.203-208
• /
• 1995

This study was carried out to efficiently use the ultrarapid freezing method in the cryopreservation of mouse ova. For this, the effects of dehydration method, oval vigour and $0^{\circ}C$ controlling method on post-thawing viability were investigated. Fresh mouse ova were dehydrated in mPBS with 3.5M DMSO and /or 0.25M sucrose, and directly immersed in L$N_2$ for ultrarapidly freezing. The frozen ova were thawed at 37$^{\circ}C$, rehydrated in mPBS with 0.25M sucrose, and then repeatedly washed in HAM's Fl0 before evaluating the morphological normality of frozen-thawed ova. The results obtained showed that there was difference between treatments in a experiment. 1) The post-thawing viability of ova dehydrated in multi-step (48.4$\pm$13.8%) was higher than that of ova in two-step (40.9$\pm$14.0%). 2) The post-thawing viability of fertilized ova (87$\pm$14.0%) was significantly(p<0.0l) higher than that of unfertilized ova (5.4$\pm$5.4%). 3) The post-thawing viability of ova dehydrated and rehydrated using a cooling machine (95.8$\pm$4.2%) was significantly(p<0.05) higher than that on ice(84.1$\pm$9.9). In conclusion, in order to efficiently cryopreserve ova in vitro with ultrarapidly freezing method, highly viable embryos should be selected, heavy osmotic shock to the dehydrating ova should be avoided, and embryos in high osmotic condition were dehydrated and rehydrated in a constantly low temperature.

• 한국응용과학기술학회지
• /
• 제40권6호
• /
• pp.1191-1200
• /
• 2023

The lithium ion battery has applied to various fields of energy storage systems such as electric vehicle and potable electronic devices in terms of high energy density and long-life cycle. Despite of various research on the electrode and electrolyte materials, there is a lack of research for investigating of the binding materials to replace polymer based binder. In this study, we have investigated petroleum pitch/polymer composite with various ratios between petroleum pitch and polymer in order to optimize the electrochemical and physical performance of the lithium-ion battery based on petroleum pitch/polymer composite binder. The electrochemical and physical performances of the petroleum pitch/polymer composite binder based lithium-ion battery were evaluated by using a charge/discharge test, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and universal testing machine (UTM). As a result, the petroleum pitch(MP-50)/polymer(PVDF) composite (5:5 wt % ratio) binder based lithium-ion battery showed 1.29 gf mm^-1 of adhesion strength with 144 mAh g^-1 of specific dis-charge capacity and 93.1 % of initial coulombic efficiency(ICE) value.

• 한국식생활문화학회지
• /
• 제15권3호
• /
• pp.155-162
• /
• 2000

The purpose of this study was to analyse serving size, plate waste, and sensory evaluation on menu of university foodservice. This study was conducted in three restaurant of one university for 14 days, 1995. The serving size of food was measured by weighing machine. The plate waste of food was calculated by the aggregative selective plate waste measurement technique. Questionnaires of sensory evaluation were developed and hand-delivered at three restaurants. Rating criteria of sensory evaluation were appearance, taste, temperature, color, flavor, texture and overall quality. The plate waste of side dish were 35.5%, 42.5%, and 39.2% in A, B, and C restaurants. The plate waste of kimchi were 46.8%, 36.3%, and 55.9% in A, B, and C restaurants. So, university foodservice manager should concern quality of side dish and kimchi. The score of fried food in sensory evaluation was low. So, batch cooking was needed. The score of rice in sensory evaluation of C restaurants was very low. Therefore, steam ice cooker in C restaurants should be changed by gas automatic rice cooker.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.296-300
• /
• 2003

The autopilot system targets decreasing labor, working environment improvement, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization. Dynamic Ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And Load Condition of ship as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that is disturbance act in non-linear from, become factor who make serv ice of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using fuzzy algorithm ,Design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• 생물환경조절학회지
• /
• 제31권4호
• /
• pp.423-431
• /
• 2022

'탄소중립'에 대한 관심이 높아짐에 따라 CO₂를 농업적으로 이용하기 위한 시도가 증가하고 있다. 본 실험은 발전소에서 부산물로 배출되는 CO₂를 포집하여 액화·정제 후 시설 엽채류의 생육 및 생산성 증대를 위한 시비용 CO₂로의 활용 가능성을 평가하기 위해 수행되었다. 경상남도 하동지역의 부추, 취나물, 미나리 농장에 드라이아이스가 공급되었고 각 농장의 온실 중 하나의 온실은 대조군, 하나의 온실은 CO₂ 처리구로 사용되었다. CO₂의 시비는 자체 제작한 장치를 사용하여 드라이아이스에서 승화된 가스를 온실에 공급했다. 부추 온실은 대조군과 CO₂ 처리에서 온실 내 CO₂ 농도의 차이가 없었고 두 온실 모두 높은 CO₂ 농도를 보였다. 반면에 취나물과 미나리 온실에서는 CO₂ 시비 처리에서 높은 CO₂ 농도가 측정되었다. 취나물 및 미나리의 생육은 CO₂ 시비 처리구에서 유의성 있게 증가하였으며 수확량도 각각 36%와 25%로 증가하였다. 경제성 분석 결과, 취나물 농가에서는 소득률이 증가하였지만, 부추와 미나리 농가는 감소하는 것으로 나타났다. 따라서 화력발전소에서 부산물로 발생한 드라이아이스의 이용은 시설 엽채류의 생산성을 높일 수 있었다.