• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.559-564
• /
• 2016

The objectives of this paper are to develop a finite element analysis model to analyze press-fitted and bending load conditions in a press-fitted assembly, and propose a hub shape optimization method to minimize contact pressure near the shaft contact edge. Numerical asymmetric-axisymmetric finite element models have been developed to predict contact stress on press-fitted shafts. The global optimization method, genetic algorithm, local optimization method, and sequential quadratic programming were applied to a press-fitted assembly to optimize the hub contact edge geometry. The results showed that the maximum contact pressure with the optimized hub shape decreased more than 60 % compared to conventional hubs and the maximum contact stress affecting fatigue life was reduced about 47 %. Hub shape optimization can be useful to increase the load capability of press fits in terms of wear and fatigue behavior.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.85-91
• /
• 2015

The press-fit shaft is an important part used in automobiles, vessels, and trains. This study proposes an optimized design method to reduce damage that may occur in the press-fitted shaft by modifying the shape of the boss step of the press-fitted shaft. To reduce the time and cost of running the optimized design method, an approximate design optimization is applied and an optimized algorithm is generated using a genetic algorithm that is widely used in engineering fields and an approximate model using a response surface method. The planned experiments for the data that are needed to generate the approximate model use a central composite design (CCD) and Latin hypercube sampling (LHS), and the results of the approximate optimization using the above two design of experiments are to be compared.

• 복식
• /
• 제50권7호
• /
• pp.235-247
• /
• 2000

This study was conducted to consider the formation of sleeves from the point of view that dress is one of expressive arts. The formative meaning of a sleeve and its chronological formation according to its formative changes as an evidence showing the Internal changes of social culture were examined, centering around day dress of England in the 11th to 19th centuries. Then, sleeves were formatively classified and their aesthetic values were considered to help do formative, aesthetic expression of dress design in the present times. Literatures and references concerning the history of domestic and foreign dress were used as a method of study. The results of this study are summarized as follows. 1. In the women's dress, the formation of the sleeve focuses on aesthetic decoration. This means that in the androgentric society the status of women are subordinate socioculturally. 2. Sleeves were classified into a fitted shape and a extension shape according to the aesthetic formation. The fluted shape expressed the beauty of body with emphasis old natural body, whereas the extension shape represented aesthetic expression of decoration. 3. The formation of a sleeve has influence on forming an image of dress by making the silhouette of dress natural or distorted, expresses the harmonious beauty of the whole dress, and produces the expressional beauty that gives a distinct characteristic to a dress.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.97-106
• /
• 2011

목적: 구면 콘택트렌즈(렌즈)가 각막에 피팅되는 경우 렌즈가 각막을 누르는 힘(압력, 부착력)을 tight 및 flat 피팅 별로 이론적으로 비교 분석하였다. 방법: Tight 및 flat 피팅 상태에서 렌즈의 각막 부착력을 계산할 수 있는 방정식 및 수치해석 프로그램(모델)을 수립하였다. 이 모델에 근거하여 BC, 직경, 두께, 모서리 형상 등 제반 렌즈변수와 각막형상(각막의 장축/단축 비, p) 변화에 수반되는 렌즈의 각막부착력을 tight 또는 flat 피팅 별로 예측/해석하였다. 결과: 각막의 p값이 증가할수록 각막부착력은 증가한다. p 값 증가에 따른 부착력 상승은 flat 피팅 경우가 tight에 비해 월등히 크다. 렌즈의 BC가 증가할수록 각막부착력은 flat 피팅에서는 큰 폭으로 감소하는데 반해 tight 피팅에서는 그 증가가 미미하다. 렌즈 직경이 증가할수록 각막부착력은 tight/flat 피팅 모두에서 미미하게 감소한다. 렌즈의 모서리형상(모서리각도 ${\Psi}$)과 렌즈두께는 tight 피팅에서만 영향을 미치는 요소들이다. Tight 피팅된 렌즈가 각막을 누르는 힘은 모서리 각도에 비례하여 증가한다. Tight 피팅 렌즈는 두께가 증가할수록 렌즈가 각막을 누르는 각막부착력은 두께에 반비례로 감소한다. 결론: 피팅상태의 렌즈가 각막을 누르는 힘에 가장 크게 영향을 미치는 2 가지 요소는 각막의 만곡도와 렌즈의 BC이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1467-1468
• /
• 2010

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.42-47
• /
• 2010

In this paper, the characteristics of contact surface damage due to fretting in a press-fitted shaft below the fretting fatigue limit are proposed by experimental methods. A series of fatigue tests and interrupted fatigue tests of small scale press-fitted specimen were carried out by using rotating bending fatigue test machine. Macroscopic and microscopic characteristics were examined using scanning electron microscope (SEM), optical microscope or profilometer. It is found that fretting fatigue cracks were initiated even under the fretting fatigue limit on the press-fitted shafts by fretting damage. The fatigue cracks of press-fitted shafts were initiated from the edge of contact surface and propagated inward in a semi-elliptical shape. Furthermore, the fretting wear rates at the contact edge are increased rapidly at the initial stage of total fatigue life. After steep increasing, the increase of wear rate is nearly constant under the load condition below the fretting fatigue limit. It is thus suggested that the fretting wear must be considered on the fatigue life evaluation because the fatigue crack nucleation and propagation process is strongly related to the evolution of surface profile by fretting wear in the press-fitted structures.

• 천문학회보
• /
• 제38권1호
• /
• pp.37.2-37.2
• /
• 2013

We present the galaxy luminosity function (LF) of the Abell 119 cluster. Deep images in u, g, r bands were taken using MOSAIC 2 CCD on a Blanco 4-m telescope at CTIO. Based on scaling relations at faint magnitudes and spectroscopy at bright magnitudes, accurate membership of galaxies is determined. The LF is fitted by a single Schechter function and a two components (Gauss + Schechter) function. Blue galaxies are well fitted by a single Schechter function with steep slope ${\alpha}$ ~ -1.55). Red galaxies in the inner, high density region are fitted by single Schechter function with shallow slope (${\alpha}$ ~ -1.30), while red galaxies in the outer, low density region are well fitted by a two components function. The different slope of LFs between the inner and outer seems to stem from the luminosity segregation of A119 indicating larger number ratio of luminous to faint ratio towards the cluster center. The different shape of LFs seems to be resulted from the different composition of luminous and faint galaxies among main-cluster, sub-cluster, and infall region.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.91-103
• /
• 2014

Shirts which have been a inner-wear in men's suit in the past, are being changed into an item that 20's men utilize to their individuality. Dress shirts have gotten out of its shape, becoming tight and slim with activity and fashion trend. In this study, two patterns of fitted dress shirts in a clothing construction text book were compared with the pattern of an apparel company with regard to the size tolerance and appearance silhouette; this comparison was performed through a fitting test and an appearance evaluation. According to the study, size tolerance of chest girth and waist girth were about 6~8cm and 10~18cm, respectively. Neck girth of the collar was tight in both the fitting test and appearance evaluation. Thus, the measurement value of the neck base girth had to be used for the collar pattern making. Moreover, approximately 35cm is a moderate size for the width on the upper arm in sleeve. Therefor the factors such as size tolerance of waist girth, height of sleeve cap, slim sleeve width and measurement value of neck base girth are being considered for the pattern making of fitted dress shirts.

• 복식문화연구
• /
• 제30권6호
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Asia pacific journal of information systems
• /
• 제25권3호
• /
• pp.563-578
• /
• 2015

Forecasting daily box-office performance is critical for planning the distribution of marketing resources, and by extension, maximizing profits. For certain movies, the number of viewers increases rapidly at the beginning of their theatrical run, and the increments slow down later. Other movies are not popular in the beginning, but the audience sizes grow rapidly afterward. Thus, the audience attendance of movies grow in different trajectories, which are influenced by various factors including marketing budget, distributors, directors, actors, and word of mouth. In this paper, we propose a method for predicting the daily performance trajectory of running movies based on the hierarchical linear model. More specifically, we focus on the effect of online word of mouth on the shape of the growth curves. We fitted the mean trajectory of the cumulative audience size as a cubic function of time, and allowed the intercept and slope to vary movie-to-movie. Moreover, we fitted the linear slope with a function of online word of mouth predictors to help determine the shape of the trajectories. Finally, we provide performance predictions for individual movies.