• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1035-1046
• /
• 2003

In order to evaluate the TOPMODEL's prediction ability for spatial distribution of water table depths, two major assumptions and governing equation of water table depth are tested. For the test, data of hydrological observations are used and a soil survey is made in the steep hillslope with thin soils. Responses of water table and hydraulic properties of soil are coincident with two major assumptions of the TOPMODEL's such as water table gradient parallel to the local topographical slope and exponential decline in transmissivity with depths. Soil texture and the decline rate of transmissivity(f) we homogeneous in space at the 0∼0.3m depths of the soil of the hillslope, but they are heterogeneous in space below its 0.3m depths due to the vertical change of soil texture and the ‘f’. It is shown that the TOPMODEL's equation can be used for simulating distribution of water table depth at the depths with uniform values of the 'f'.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.27-37
• /
• 2012

To investigate the effect of aquifer disturbance on hydraulic properties while well drilling at unconsolidated aquifer, the following tests were conducted: the surge block and air-surging methods, which are well development methods used after well drilling; and step-drawdown tests and constant-rate pumping tests, which are used to assess changes in the aquifer after well drilling and development. The result of step-drawdown tests indicated that drawdown for a pumping-rate of $700m^3/day$ was 21.62 m after well development, decreasing 4.39 m from 26.01 m after well drilling. The skin factor used to identify the well properties decreased from 7.92 after well drilling to 5.04 after well development, respectively, which shows the improvement of well. Constant-rate pumping tests revealed a small increase in aquifer transmissivity after well development at MW-2, -3, and -4, centering around pumping well, from $1.684{\times}10^{-3}{\sim}4.490{\times}10^{-3}m^2/sec$ to $4.002{\times}10^{-3}{\sim}4.939{\times}10^{-3}m^2/sec$. MW-1, however, showed decline in hydraulic conductivity from $1.018{\times}10^{-2}m^2/sec$ to $6.988{\times}10^{-3}m^2/sec$, which was caused by a small decrease of aquifer permeability around monitoring well MW-1 due to latent factor of air interception and clogging in aquifer during surging. This finding indicates that fine particles have an effect on hydraulic properties at unconsolidated aquifers during well drilling; therefore, we consider that well drilling and development have an effect on hydraulic properties.