• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.516-522
• /
• 2014

Old architectural wood materials damaged by a fire were evaluated on the basis of wood species and scanning electron microscopy (SEM) observation of wood tissues in combination with energy dispersive X-ray spectroscopy (EDXS) analysis. Results of SEM observation showed that tracheid wall thickness of burned parts was very thin compared with undamaged and sound wood, and tylosoid in the resin canals disappeared after the exposure to fire. SEM-EDXS analysis indicated that carbon and oxygen peaks occurred in the original energy band, and the carbon peak was higher than that of the oxygen in the burned part. A computerized tomography was also undertaken to investigate the carbonization layer formed by fire and possible internal defects.

• 한국유체기계학회 논문집
• /
• 제15권6호
• /
• pp.31-38
• /
• 2012

Rotor of rotating machinery is the highly damaged part. Fault of 7 different types was confirmed as the main causes of rotor damage from the pump failure history data in domestic and U.S. nuclear. For each fault types, simulation testing was performed and fault signals were collected form the sensors. To calculate the statistical parameters of time-domain & frequency-domain, measured signals were analyzed by using the discrete wavelet transform, fast fourier transform, statistical analysis. Total 84 parameters were obtained. And Effectiveness factor were used to evaluate the discrimination capacity of each parameter. From the effectiveness factor, RAW-P4/RAW-P7/WT2-NNL/WT2-EE/WT1-P1 showed high ranking. Finally, these parameters were selected as the feature parameters of intelligent fault diagnostics for rotor.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.7-12
• /
• 2005

In heavy industrial fields such as power plant and chemical plant, it is often necessary to restore a damaged part of large machinery or structure which is installed in the hazard working place. In this paper, to evaluate the safety of plastic deformed cylindrical beam a finite element technique has been used. The variations of residual stresses on the process of damaging and restoring for surfaces and cross-sections have been examined. The results show that the maximum von Mises stresses occur outer cylinder surfaces of boundary between cylindrical beam support md cylindrical beam when deformation procedure and restoring force is applied. The maximum residual stress remains 158.6MPa in the inner wall and this value correspond to $53\%$ of yield stress then restoration procedure is finished.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.175-176
• /
• 2018

In this study, the performance of acrylate was evaluated by using acrylate composite waterproof sheet. Through this experiment, the waterproof sheet plays a primary role of waterproofing. When the water leakage occurs, the acrylate reacts with water and expands, and the performance of the self repairing of the damaged part is confirmed by temperature.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.813-816
• /
• 2011

추진제 탱크 가압 시스템 적용을 위한 솔레노이드 밸브를 제작하여 작동시험 및 기밀시험을 수행하였다. 시험 결과 제작된 모든 밸브에서 작동 시간은 밸브 성능 요구 조건을 만족하고 있다. 그러나 기밀시험 결과 솔레노이드 밸브 내부에서 일부 누설이 있는 것을 발견하였다. 솔레노이드 밸브 분해를 통해 누설은 용접에 의한 Seat면의 손상이 주요 원인이라는 것을 확인하였다. 본 연구를 통해 추진제 탱크 가압용 솔레노이드 밸브 개발 가능성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.409-412
• /
• 2003

Fatigue strength. especially crack initiation behavior of high strength steel under marine water environment was investigated. Marine structures were usually constructed by lot of weld joints and were designed by basis of the fatigue strength of weld joints. This study was carried out to mini. The fatigue initiation behavior is more important rather than crack propagation behavior under the design of marine structures, because it is very difficult to find out the crack propagation phenomena and repair the damaged part of welded joints in sea water Then, the new configuration specimen for fatigue crack initiation tests was proposed. Using this new specimen, it is easy to carry out the crack initiation tests with relatively low cycling loading and clearly find out a crack initiation fatigue life.

• 선박안전
• /
• 통권24호
• /
• pp.4-20
• /
• 2008

Stainless steel 304 or stainless steel 630 types using propeller shaft of a small ship or a FRP fishing boat generally restrain localization corrosion and abrasion damage occurrence to shaft bearing or grand packing contact. In general, the residual stress which remains after welding or heat treatment in material can cause the stress concentration or localization corrosion. In case of small ship, stainless steel such as STS304 has long been used for propeller shaft. Meanwhile, crew of small ship tend to reuse damaged propeller shaft after repair by welding and performing heat treatment to save cost. However, it was found that reused propeller shaft by repair often caused troubles in ship's operation. In this study, the basic guideline for maintenance and treatment of propeller shaft are investigated. From the results of investigation, remarkable deterioration of the material properties and corrosion resistance on the welded work part was observed.

• International Journal of Computer Science & Network Security
• /
• 제22권8호
• /
• pp.343-351
• /
• 2022

A brain tumor forms when some tissue becomes old or damaged but does not die when it must, preventing new tissue from being born. Manually finding such masses in the brain by analyzing MRI images is challenging and time-consuming for experts. In this study, our main objective is to detect the brain's tumorous part, allowing rapid diagnosis to treat the primary disease instantly. With image processing techniques and deep learning prediction algorithms, our research makes a system capable of finding a tumor in MRI images of a brain automatically and accurately. Our tumor segmentation adopts the U-Net deep learning segmentation on the standard MICCAI BRATS 2018 dataset, which has MRI images with different modalities. The proposed approach was evaluated and achieved Dice Coefficients of 0.9795, 0.9855, 0.9793, and 0.9950 across several test datasets. These results show that the proposed system achieves excellent segmentation of tumors in MRIs using deep learning techniques such as the U-Net algorithm.

• PNF and Movement
• /
• 제6권2호
• /
• pp.39-50
• /
• 2008

Purpose : This article reviewed the advances in the understanding of the effect of motor rehabilitation and brain plasticity on functional recovery after CNS damage. Methods : This is literature study with Pubmed, Medline and Science journal. Results : The inability of CNS neurons to regenerate is largely associated with nonneuronal aspects of the CNS environment. Especially, this neuronal growth inhibition is mediated by myelin associated glycoprotein, olygodendrocyte-myelin glycoprotein, and NOGO. Enriched environment, motor learning, forced limb use have been utilized in scientific studies to promote functional reorganization and brain plasticity. Especially, enriched environment and motor enrichment may prime the brain to respond more adaptively to injury, in part by expressed neurotrophic factors. Conclusions : These reviews suggest that activity-induced neural plasticity occur in damaged brain areas in order to functional reorganization, where it could contribute to motor recovery, and represent a target for stroke rehabilitation.

• 한국유체기계학회 논문집
• /
• 제16권6호
• /
• pp.26-31
• /
• 2013

Last blades of low-pressure turbine in nuclear power plant are the highly damaged part and always suffered from different types of loadings leading to various stress components, stresses due to centrifugal force and steam flow loading. Especially, centrifugal stress generated by turbine rotation is one of the main problems and more significant than other stresses as they have the greatest effect on total stress. Therefore, this study was performed to obtain the important information for estimation model development of the blade centrifugal stress level and distribution.