• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.825-835
• /
• 2003

Previous studies have demonstrated the importance of joint angle errors mainly due to skin artifact and measurement errors during gait analysis. Joint angle errors lead to unreliable kinematics and kinetic analyses in the investigation of human motion. The purpose of this paper is to present the Joint Averaging Coordinate System (JACS) method for human gait analysis. The JACS method is based on the concept of statistical data reduction of anatomically referenced marker data. Since markers are not attached to rigid bodies, different marker combinations lead to slightly different predictions of joint angles. These different combinations can be averaged in order to provide a "best" estimate of joint angle. Results of a gait analysis are presented using clinically meaningful terminology to provide better communication with clinical personal. In order to verify the developed JACS method, a simple three-dimensional knee joint contact model was developed, employing an absolute coordinate system without using any kinematics constraint in which thigh and shank segments can be derived independently. In the experimental data recovery, the separation and penetration distance of the knee joint is supposed to be zero during one gait cycle if there are no errors in the experimental data. Using the JACS method, the separation and penetration error was reduced compared to well-developed existing methods such as ACRS and Spoor & Veldpaus method. The separation and penetration distance ranged up to 15 mm and 12 mm using the Spoor & Veldpaus and ACRS method, respectively, compared to 9 mm using JACS method. Statistical methods like the JACS can be applied in conjunction with existing techniques that reduce systematic errors in marker location, leading to an improved assessment of human gait.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1248-1266
• /
• 2012

This paper presents a multilevel reversible data hiding method based on histogram shifting which can recover the original image losslessly after the hidden data has been extracted from the stego-image. The method of prediction is adopted in our proposed scheme and prediction errors are produced to explore the similarity of neighboring pixels. In this article, we propose two different predictors to generate the prediction errors, where the prediction is carried out using the center prediction method and the JPEG-LS median edge predictor (MED) to exploit the correlation among the neighboring pixels. Instead of the original image, these prediction errors are used to hide the secret information. Moreover, we also present an improved method to search for peak and zero pairs and also talk about the analogy of the same to improve the histogram shifting method for huge embedding capacity and high peak signal-to-noise ratio (PSNR). In the one-level hiding, our method keeps image qualities larger than 53 dB and the ratio of embedding capacity has 0.43 bpp (bit per pixel). Besides, the concept with multiple layer embedding procedure is applied for obtaining high capacity, and the performance is demonstrated in the experimental results. From our experimental results and analytical reasoning, it shows that the proposed scheme has higher PSNR and high data embedding capacity than that of other reversible data hiding methods presented in the literature.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.61-70
• /
• 2003

The size distribution of the free water paths between earlywood and latewood for six species in the heartwood of softwoods was estimated from the amount of dehydrated free water under various centrifugal fields, such as 2,200, 3,300, 4,800 and 6,900 rpm. The centrifugal method is based on the concept that water movement occurs by the balance of centrifugal force and water potential by meniscus. Water stops where the pressure differential is zero. In the centrifugal field, only two factors affect water movement in wood, that is, centrifugal force and water potential. Also, the water permeability was evaluated from the relationship between the water saturation ratio after the centrifugal treatment and the measure of water potential in specimen. The results showed that Cryptpmeria japonica had clear peaks at 0.70 ㎛ in earlywood and at 0.50 ㎛ in latewood. Tsuga sieboldii and Larix kaemferi had peaks at 0.50 and 0.30 ㎛ in both earlywood and latewood, respectively. Abies firma showed peaks at 0.70 ㎛ in earlywood and at 0.30 ㎛ in latewood. The water permeability of earlywood was higer than that of latewood for all softwoods except Pseudotsuga menziesii.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.463-474
• /
• 2004

Game theory is a method of mathematical analysis developed to study the decision making process. In 1928, Von Neumann mathematically proved that every two-person, zero-sum game with many pure finite strategies for each player is deterministic. In the early 50's, Nash presented another concept as the basis for a generalization of Von Neumann's theorem. Another central achievement of game theory is the introduction of evolutionary game theory, by which agents can play optimal strategies in the absence of rationality. Through the process of Darwinian selection, a population of agents can evolve to an Evolutionary Stable Strategy (ESS) as introduced by Maynard Smith in 1982. Keeping pace with these game theoretical studies, the first computer simulation of coevolution was tried out by Hillis. Moreover, Kauffman proposed the NK model to analyze coevolutionary dynamics between different species. He showed how coevolutionary phenomenon reaches static states and that these states are either Nash equilibrium or ESS in game theory. Since studies concerning coevolutionary phenomenon were initiated, there have been numerous other researchers who have developed coevolutionary algorithms. In this paper we propose a new coevolutionary algorithm named Game theory based Coevolutionary Algorithm (GCEA) and we confirm that this algorithm can be a solution of evolutionary problems by searching the ESS. To evaluate this newly designed approach, we solve several test Multiobjective Optimization Problems (MOPs). From the results of these evaluations, we confirm that evolutionary game can be embodied by the coevolutionary algorithm and analyze the optimization performance of our algorithm by comparing the performance of our algorithm with that of other evolutionary optimization algorithms.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.348-356
• /
• 1987

A new simple method to estimate the earth quantity which is basic data for making the plan of mountain forest road is tried to develop as one of ways to reduce time cost of plan making. The zero-line surveying method, the concept of 2/3 road width in cut-away part and of same quantity between cut-away and fill-up earth which are the backgrounds to develop this method is introduced and explaned also it's theoritical propriety. Under the precondition which have to apply above concepts for constructing the mountain forest road the exchange table for estimating the earth quantity is made like table 3 and 4 through being calculated by a trigonometric function. Table 3 can be used to estimate the earth quantity on the cut-away road-width according to slope of terrain and different road-width, and table 4 can be applied to calculate the quantity of cut-away earth when to know the road-width of cut-away. When using these tables the performance of field surveying and office work for road plan will be highly increased.

• Environmental and Resource Economics Review
• /
• v.12 no.2
• /
• pp.347-382
• /
• 2003

The paper presents available options that Korea can adopt in an effort to promote eco-industrial development in a near future. What is missing and the reasons why Korea is behind the other countries in the area are: 1) Lack of holistic view and the integrated approach toward economy and environment in policy implementation, 2) Lack of understanding, among entrepreneurs, of the concept of productivity per input resource, and the fact that not only labor and capital productivity but also the total productivity enhancement is vital for industry's competitive edge; There has been no driving force in the market to develop economies of system integration to turn industrial wastes to valuable input resources, 3) Unsupportive regulatory system regarding the trade of by products, and 4) Lack of financing and incentive mechanism. 5) Lack of information forum. Regulatory reform should be taken for the direction that in effect increase the price of disposal and motivate firms to seek symbiotic relationship with other firms, and facilitate trade by-product between firms. Financing and incentive mechanism should be introduced in order for the industry to find easy access to the opportunities for organizing the network to transform wastes in negative value to the value added resources. Also information network should be established to provide a market for by-product exchange and public education to improve industry's environmental performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.197-208
• /
• 2000

Choi et al./sup 1)/ presented the total Lagrangian formulation based upon the degenerated shell element. Geometrically correct formulation is developed by updating the direction of normal vectors and taking into account the second order rotation terms in the incremental displacement field. Assumed strain concept is adopted in order to overcome the shear locking phenomena and to eliminate the spurious zero energy mode. In this paper, for the ultimate strength analysis of stiffened shell structures considering effects of residual stresses, the return mapping algorithm based on the consistent elasto-plastic tangent modulus is applied to anisotropic shell structures. In addition, the load/displacement incremental scheme is adopted for non-linear F.E. analysis. Based on such methodology, the computer program is developed and numerical examples to demonstrate the accuracy and the effectiveness of the proposed shell element are presented and compared with the results in literatures.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.171-181
• /
• 2004

This study was conducted to explore the tensile strength models in granular soil at the full range of unsaturated state. Direct tension experiments were carried out with a newly developed direct tension technique. The measured experimental data were compared with theoretical models developed by Rumpf and Schubert for monosized ideal particulate solids at the unsaturated state. To do this, the soil-water characteristic curve obtained from a suction-saturation experiment was used to define the unsaturation state and the negative pore water pressure with different water content levels, which are important factors in theoretical tensile strength models. The nonlinear behavior of the tensile strength for unsaturated granular soil at the pendular state is appropriately simulated with Rumpf's model. For the funicular and capillary states, the predicted trend by Schubert's model is properly matched with the experimental data: tensile strength steadily increases and reaches a maximum value and then decreases until it reaches zero. This comparison supports the concept that the tensile strength of unsaturated real granular soil can be approximately simulated with theoretical models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.59-68
• /
• 1987

Several series of fracture tests were conducted to explore the fracture characteristics and to determine the fracture energy of concrete. A stable three-point bend test was employed to generate the load-deflection curves. The fracture energy may then be calculated from the area under the complete load-deflection curve. The initial notch-to-beam depth ratio (${\alpha}_0$/H) was varied from zero to 0.6. The prediction formula for the fracture energy of concrete is also derived and is found to depend on the tensile strength and aggregate size. The proposed fracture energy formula can be used for the fracture analysis of concrete structures. The present study also devises an equivalent crack length concept to predict the maximum failure loads of concrete beams. A simple formula for the equivalent crack length is proposed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.15-19
• /
• 2012

Wood wastes could be renewable resources by recycling as particleboard manufacturing or energy production. Particle board is the most common item of wood waste recycling and energy production from wood wastes has highlighted for energy recovery to reduce greenhouse gas generation in recent years. The aim of this study was to evaluate the environmental benefits of the processes for particle board manufacturing and energy production. The functional unit was one ton of wood wastes and the environmental impact was analyzed by life cycle assessment methodology. The result was that 112kg of carbon dioxide equivalent was produced from particle board manufacturing process and 382kg of carbon dioxide equivalent was produced from combined heat and power generation process. The concept of temporary biomass carbon storage was to applied to this study.