• 풍력에너지저널
• /
• 제14권3호
• /
• pp.14-24
• /
• 2023

The significance of renewable energy has been on the rise, as evidenced by the 3020 renewable energy plan and the 2050 carbon neutrality strategy, which seek to advance a low-carbon economy by implementing a power supply strategy centered around renewable energy sources. This study examines the wind resources on the west coast of South Korea and confirms the potential for wind power generation in the area. Wind speed data was collected from 22 automatic weather system stations and four light house automatic weather system stations provided by the Korea Meteorological Administration to evaluate potential sites for wind farms. Weibull distribution was used to analyze the wind data and calculate wind power density. Annual energy production and capacity factors were estimated for 15-20 MW-class large wind turbines through the height correction of observed wind speeds. These findings offer valuable information for selecting wind power generation sites, predicting economic feasibility, and determining optimal equipment capacity for future wind power generation sites in the region.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.171-175
• /
• 2003

The sub-cooled nitrogen cooling system at 65 K with GM cryo-cooler is developed for cooling down the DC reactor of 6.6 ㎸-200 A class HTS Fault Current Limiter(SFCL). The sub-cooled nitrogen cooling is more economic than saturated nitrogen cooling, because the length of HTS wire is reduced in the same capacity, as well as, more stable. The cooling system with the GM cryo-cooler installed on the cryostat is not only compact but also efficient for energy saving. In the nitrogen vessel, after evacuating with vacuum pump to saturated nitrogen at 65 K, sub-cooled nitrogen at 65 K is made by putting in gas helium to 1 atm. During the short circuit test occurring the fault current of 1000 A, the sub-cooled nitrogen cooled DC reactor for SFCL is kept the state of sub-cooled nitrogen at 65 K.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1112-1113
• /
• 2015

In the end of 2014, Changwon National University and TECHSTEEL Co., Ltd. had initiated a project on the development of a 300 kW-class HTS DC Induction Furnace(HTS DC IF) for preheating non-ferrous metal billets funded by the Korea Institute of Energy Technology Evaluation and Planning for 3 years. This is the one of the most realistic commercial machines applying the coated conductors. In this paper, the development progress of a 300 kW-class HTS DC IF was introduced. The major characteristics of the furnace including its capacity, structure and operation scheme were presented. For ensuring the successful design, a pre-validation study was performed through the electromagnetic, heat transfer and solid mechanical analysis using a multi-physics FEM tool. The aluminum billet was heated up to $540^{\circ}C$ under 1 T of the magnetic flux density at the center of the billet, and the simulation results were described in detail.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.302-307
• /
• 2021

Polymer electrolyte membrane (PEM) electrolyzer or alkaline electrolyzer is required to produce green hydrogen using renewable energy such as wind and/or solar power. PEM and alkaline electrolyzer differ in many ways, instantly basic materials, system configuration, and operation characteristics are different. Building an optimal water hydrolysis system by closely grasping the characteristics of each type of electrolyzer is of great help in building a safe hydrogen ecosystem as well as the efficiency of green hydrogen production. In this study, the basic operation characteristics of a kW class alkaline water electrolyzer we developed, and water electrolysis efficiency are described. Finally, a brief overview of the characteristics of PEM and alkaline electrolyzer for large-capacity green hydrogen production system will be outlined.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.99-100
• /
• 2003

The term allergy was originally defined by Clemens Yon Pirquet as ‘an altered capacity of the body to react to foreign substance’, which was an extremely board definition that included all immunological reactions. Allergy is now defined in a much more restricted manner as ‘disease following an immune response to an otherwise innocuous antigen’. Allergy is a member of a class of immune responses that have been termed hypersensitivity reactions; these are harmful immune responses that produce tissue injury and may cause serious disease. (omitted)

• 한국터널지하공간학회 논문집
• /
• 제21권3호
• /
• pp.433-452
• /
• 2019

본 연구는 구조용 합성섬유(PP섬유) 혼입량에 따른 숏크리트 보강성능과 적정한 평가방법에 관한 것으로, 강섬유($37.0kg/m^3$)와 구조용 합성섬유(PP섬유) 혼입량을 매개변수($5.0kg/m^3$, $7.0kg/m^3$, $9.0kg/m^3$)로 설정하여 숏크리트 압축강도, 휨강도 및 휨인성 시험을 수행하였다. 특히, 판상의 숏크리트 에너지 흡수능력을 평가하기 위하여 원형 패널 휨인성 시험(Road and Traffic Authority, RTA)을 수행하였다. 검토결과, 압축강도 및 휨강도는 강섬유 보강 숏크리트가 다소크나, 실질적인 숏크리트 보강성능를 나타내는 휨인성은 구조용 합성섬유(PP섬유) 보강 숏크리트가 큰 것으로 분석됨에 따라, 강섬유 보강 숏크리트 대비 동등 이상의 보강효과를 발휘하는 것으로 검토되었다. 또한, 구조용 합성섬유(PP섬유) 혼입량에 따른 휨인성 및 에너지 흡수능력 상관관계에 의하면, 보시편 휨인성 시험(KS F 2566)의 허용기준 3.0 MPa이하조건에서 에너지 흡수능력이 발휘(A등급: 2.55 MPa = 202J, B등급: 2.72 MPa = 282J, C등급: 3.07 MPa = 403J)되는 것으로 검토되었다. 국내 터널현장에서 보수적으로 측정되는 강도개념의 숏크리트 휨인성(>3.0 MPa)을 본 연구의 숏크리트 에너지 흡수능력 상관관계로 지보성능을 평가할 경우, 보다 실질적이고 신뢰도 높은 숏크리트 지보성능 평가가 가능할 것으로 판단된다.

• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.279-289
• /
• 2020

In this paper, a method is proposed for establishing an approximate prediction model of rotor-dynamics through modal testing. In particular, the proposed method is applicable to systems that cannot be established according to conventional methods owing to the absence of information regarding the dimensions and material of the rotor-bearing system. The proposed method is demonstrated by employing a motor dynamometer driven by a 1 MW class induction motor without dimension and material information. The proposed method comprises a total of seven steps, wherein an initial model is established by incorporating approximate dimensions and material information, and the model is improved on the basis of the natural frequency characteristics of the system. During model improvement, the modification factor is introduced for adjusting the elastic modulus and shear modulus of the system. Analysis of critical speed and imbalance response indicates that the separation margin is 67% and the maximum vibration amplitude is less than the amplitude limit of 0.032 mm under the API 611 standard, which means that the motor dynamometer can stably operate at a rated speed of 1800 rpm. Hence, the obtained results validate the feasibility of the proposed method. Furthermore, for broad usage, it is necessary to accordingly apply and validate the proposed method for various rotor-bearing systems.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1670-1673
• /
• 2002

For pattern recognition on high-dimensional data, such as images, the dimensionality reduction as a preprocessing is effective. By dimensionality reduction, we can (1) reduce storage capacity or amount of calculation, and (2) avoid "the curse of dimensionality" and improve classification performance. Popular tools for dimensionality reduction are Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), and Independent Component Analysis (ICA) recently. Among them, only LDA takes the class labels into consideration. Nevertheless, it, has been reported that, the classification performance with ICA is better than that with LDA because LDA has restriction on the number of dimensions after reduction. To overcome this dilemma, we propose a new dimensionality reduction technique based on an information theoretic measure for difference of distribution. It takes the class labels into consideration and still it does not, have restriction on number of dimensions after reduction. Improvement of classification performance has been confirmed experimentally.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.340-347
• /
• 2007

This paper proposes a new class of Space-Time Block Codes, which is manipulated from the existing transmit diversity schemes. We analyze the performance and the receiver complexity of the proposed scheme and confirm that the new diversity scheme can yield performance gain over other existing four-transmit antenna cases. By relaxing the diversity criterion on code designs, the proposed space-time code provides a full transmission rate for four-transmit antennas and makes it possible to approach the open-loop Shannon channel capacity. Outage capacity and simulation results are used to show that substantial improvements in performance while maintaining a simple linear processing receiver structure are obtained in frequency selective channels.

• 한국정보통신학회논문지
• /
• 제26권12호
• /
• pp.1846-1854
• /
• 2022

감시정찰을 위한 임무장비의 고도화와 다변화는 공용데이터링크의 대용량화에 대한 요구로 이어지고 있다. 해외에서는 고고도 무인기인 Global hawk에 T4급(274Mbps) 공용데이터링크가 적용되었고, 국내에서도 다양하게 연구개발 중이다. 본 논문에서는 공용데이터링크의 T4급 이상의 대용량 전송을 위해 유럽 위성방송 규격인 DVB-S2 프레임 구조에 데이터 전송속도 손실을 최소화하면서 SNR 성능을 향상시킬 수 있도록 파일럿을 추가 적용한 구조를 제안한다. 제안하는 구조의 성능평가를 위해, 무인기 데이터링크 채널 환경을 모사하여 DVB-S2와 성능을 비교분석하였다. 시뮬레이션 결과 제안된 구조에서 DVB-S2 대비하여 T4급 전송속도에서 0.15% 전송속도의 손실이 발생하였지만, 무인기 채널 환경에서 0.2~0.3dB의 향상된 SNR 수신성능을 확인하였다.