• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.407-411
• /
• 2022

공항 시설에서 통틀어 보안이 가장 취약한 곳은 Landside이다. 항공기 테러가 빈번하던 시절에는 X-ray를 비롯한 검색기술의 수준이 높지 않았던 탓에 Hijacking이나 폭발물에 의한 피해가 많았었다. 물론 기술이 발전한 현대에 와서도 Hijacking이나 항공기 폭파 같은 테러가 발생하고 있지만 9.11테러 이전보다는 훨씬 감소한 상황이다. 최근에는 보안수준이 높은 Airside 보다 상대적으로 보안이 취약한 Landside에 대한 보안 강화가 필요하다. 그 이유는 테러의 유형이 협상의 여지가 없는 최대피해와 최대공포를 주는 방식으로 변화하고 있기 때문이다. 따라서 상대적으로 부담이 덜하고 유동인구가 많은 Landside가 Soft Target이 되었다. 이런 상황에서 대한민국 공항이 어떻게 대응해야 하는지 관련된 법을 중심으로 본 연구를 진행해 보고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.305-306
• /
• 2021

본 논문에서는 인천공항 Airside와 Landside에 위치한 자산의 효율적인 관리를 위한 사물인터넷(IoT) 기반 스마트 자산관리 시스템의 구성과 실증을 제시한다. IoT기반 스마트 자산관리시스템은 위치정보를 생성하는 IoT 태그와 게이트웨이, 수집된 위치정보를 수신하고 표출하는 서버로 구성되어 있으며, IoT 태그를 자산에 부착하여 자산의 실내외 위치정보를 자산관리 시스템에서 실시간으로 확인할 수 있다. 실내 위치정보는 BLE(Bluetooth Low Energy)를 통해 취득하며, 실외 위치정보는 GPS와 LoRa(Long Range)를 통해 취득 가능하다. 개발한 시스템의 성능 검증을 위해 인천공항 제1여객터미널 내 기설치된 AP를 활용하였으며, 공항 전역을 커버할 수 있는 LoRa Gateway를 설치하였다. 개발한 자산관리 시스템은 공항이 보유한 자산의 도난 방지 등 효율적인 관리 와 공항운영에 기여할 것으로 예상된다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.59-77
• /
• 2003

Air Traffic Control Tower is one of the most important units in Airport operation. It provides services related to safe and efficient traffic flows that control aircraft on the ground maneuvering area and terminal airspace. Also It is responsible for managing of ground operators. The major objective of this study is to evaluates relative efficiency of ATC towers in Domestic airports using data envelopment analysis so that it helps the ATC authority to improve the tower efficiency, to decide the level of benchmarking target and to establish the best alternative. The results of this study are the following; First, as a result of analysis for the potential improvement, it has analysed that the common problems of each ATC tower are to increase its number of flight and to reduce its number of runway followed by airside area, the number of air traffic controller and the number of stand. Second, it has shown that the each tower in RKPC(8), RKPT(5), RKPK(l) and RKSS(l) are used as the reference set. Especially, the tower in RKPC analyzed as a relatively efficient unit is the most main target for the towers in RKTU, RKTH, RKPS and RKTY to do bench marking and to set up the strategy for improving relative efficiency of the tower. Third, tower is actually not able to control the input and output data in this study except the number of controller, so that ATC authority is recommended to improve inefficiency of the towers through handling the number of controller.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.13-19
• /
• 2018

Master plan plans for new airports should estimate the approximate scale of the airside's moorings and terminals. The size of the pavilion can be determined by complex factors such as the operating hours of the operating company, the frequency of operation, and the aircraft class. Among them, the number of flights is calculated using the Horon-jeff equation because of the relationship between the number of flights and the time occupied by the mains. Since this estimation formula is a simplified formula, it is necessary to verify the appropriateness of the method of estimating the scale and to suggest improvement directions. Therefore, in this study, we propose a method of estimating the size of the western flags by investigating and analyzing the main airports of overseas airports to determine whether the application of the Horon-jeff formula is appropriate.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.3
• /
• pp.100-107
• /
• 2008

The heat transfer and friction characteristics of heat exchangers having convex louver fins are experimentally investigated, and the results are compared with those of wave fin counterparts. Eighteen samples (nine convex louver fin samples and nine wave fin samples) which had different fm pitches (1.81 mm to 2.54 mm) and tube rows (one to four) were tested. The convex angle was $11.7^{\circ}$. The j factors are insensitive to fin pitch, while f factors increase as fin pitch increases. The effect of fin pitch on f factor is more significant for the wave fin compared with the convex louver fin. It appears that the complex fin pattern of the convex louver fin induces intense mixing of the flow, and thus reduces the effect of fin pitch. Both the j and f factors decrease as the number of tube row increases. However, as the Reynolds number increases, the effect of tube row diminishes. Comparison of the convex louver fin j factors with those of wave fin reveals that convex louver fin j factors are 18% to 29% higher than those of wave fin. The f factors are 16% to 34% higher for the convex louver fin. The difference increases as fin pitch decreases. Existing correlation fails to adequately predict the present data. More data is needed for a general correlation of the convex louver fin geometry.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.49-60
• /
• 2013

PURPOSES : The evaluation of the pavement condition of the asphalt concrete pavement of No. 2 runway of Inchon International Airport through PMS, a supporting system for making a decision of pavement, maintenance and repair, was made, and the proper time for repair according to the PCI reduction rate was suggested. METHODS : By comparing and analyzing the evaluation results of pavements built in 2009, 2010, 2011, PCI change in each facility (No. 2 runway, C parallel taxiway, connection taxiway) was calculated. By applying the calculated change to PCI deduction rate model, the pavement condition of the target sections was estimated, and then the necessary section and time for repair were chosen. RESULTS : After careful consideration of the time for pavement and maintenance, based on the result of PCI prediction, it was estimated that the southern takeoff and landing section of No. 2 runway was required to be repaired in 2012; connection taxiway in 2013; and C parallel taxiway in 2014; however, the section which is the main moving route of connection taxiway and C parallel taxiway was needed to be repaired in 2012. CONCLUSIONS : For maintenance and repair of airport pavements, the optimal alternative should be chosen by considering economics and operability, via examining the time for repair and the aspect of management all together on the basis of this study.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.103-118
• /
• 2023

An indicator system is an effective way to monitor ongoing safety status. Current aviation safety measurements account for many qualitative technical and lagging indicators. Conversely, quantitative and leading indicators have only a tiny proportion. This research added more quantitative leading indicators and reviewed them to harmonize lagging and leading indicators to measure airport safety and provide an index. The South Korean national gate, Incheon International Airport's indicators, were applied as primary data to verify this research practically. Then, examples from International and national authorities were reviewed and extracted for use. Fifty-five safety specialists participated in the focus group discussion and three rounds of the Delphi survey. Finally, 51 sub-indicators were newly chosen. After this process, weights for each indicator could be assigned using the AHP (Analytical Hierarchy Process) to provide an integrated index. The result of the simulation with newly added indicators in the past five years (2020-2022) reliable trend showed in indicators and integrated index. Moreover, this allows monitoring the status of the details of indicators and holistic insight. This study considered that it is more suitable for a single company or service provider to use it according to the exact situation than in a macro- and general-purpose at the country or regional level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6445-6452
• /
• 2015

The surface of the cooling coil becomes dry, wet or partially wet depending on the operating condition. Thus, a proper design of the cooling coil should include a heat transfer analysis on dry, wet or partially wet surfaces. In this study, an elementary model, which analyzes the cooling on an elementaty basis, is proposed. Comparison of the predictions of the model with experimental data of the cooling coil revealed that heat transfer rates were predicted within 10.1%, airside pressure drop within 11.1% and sensible heat ratio within 5.7%. The model was used to investigate the effect of water circuitory on cooling coil performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.69-82
• /
• 2011

This paper tried to find out what the main factors are to impact on satisfaction level of transit passengers at Incheon airport. Incheon airport has made lots of transit facilities and services to attract transit passengers from neighboring airports to increase transit rate as high as advanced foreign airports such as Heathrow, Schiphol and Hong Kong. A survey was performed on 450 transit passengers resting at airport transit lounge in airside area. According to the result, it was found out to be significant factors affecting satisfaction of transit that convenience of security screening, price of duty-free product, a direction board & signage and terminal orientation among Chinese transit passengers. On the other hands, it seemed that Japanese transit passengers thought diversity of airline routes, convenient transfer flight schedule, total transit time and terminal orientation are major variables affecting their satisfaction. Considering the effect of demographic factors, Chinese passenger's satisfaction was more affected by age, travel purpose, the number of travel per year and flight destinations. However, Japanese transit passenger's satisfaction was only affected by the flight destinations, especially willing to travel to North America and Europe.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.355-367
• /
• 2004

The heat transfer and friction characteristics of the heat exchangers having sinusoidal wave fins were experimentally investigated. Twenty-nine samples having different waffle heights (1.5 mm and 2.0 m), fin pitches (1.3mm to 1.7mm) and tube rows (one to three) were tested. Focus was given to the effect of the waffle configuration (herringbone or sinusoidal) on the heat transfer and friction characteristics. Results show that the sinusoidal wave geometry provides higher heat transfer coefficients and friction factors than the herringbone wave geometry, and the difference increases as the number of row increases. The i/f ratios of the herringbone wave geometry, however, are larger than those of the sinusoidal wave geometry. Compared to the herringbone wave geometry, the sinusoidal wave geometry yielded a weak row effect, which suggests a superior heat transfer performance at the fully developed flow region. Possible explanation is provided considering the flow characteristics in wavy channels. Within the present geometric range, the effect of the waffle height on the heat transfer coefficient was not prominent. The effect of the fin pitch was also negligible. Existing correlations highly overpredicted both the heat transfer coefficients and friction factors. A new correlation was developed using the present data.