• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.120-127
• /
• 1999

The purpose of the study is to mae experimental whether the required property quantity and marker efficiency has variation of marking based on theoretical background of marking using th function of computer marking system. To investigate that variation of marking effect the required property quantity and marker efficiency as the following is tried to solve giving separation to item width of property cutting line detail which is believed to influence the required property quantity and marker efficiency. How to make experiment as follows separating in order marker of 1082 styles of women's ready-made clothes of with basic design(jacket. pants. skirt, two-piece). Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows 1. In marker of women's jacket and pants the required property quantity shows lower when it is each item than when it is two-pice,. 2. In marker of women's pants marker efficiency shows the highest level when width is 132cm and it shows the lowest level when width is 112cm. 3. In width 152cm of skirt marker it has cutting lines shows lower the required property quantity than it doesn't have. 4. In marker of women's pants it has details shows more high marker efficiency than it doesn't have.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.158-164
• /
• 2005

Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.279-280
• /
• 2023

Due to the deterioration of infrastructure, the importance of maintenance is continuously increasing. Therefore, an integrated maintenance method for various facilities is required. In this study, a maintenance priority determination method for integrated maintenance of roads and pipe network facilities was developed. It is possible to analyze attribute information by using GIS data of roads and pipe networks, and shape information can be used. This information is derived as quantitative figures for determining maintenance priorities. In the future, it is expected that facility maintenance can be further advanced in connection with maintenance method and quantity information for each facility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.687-697
• /
• 2014

This study ranges from planning phase to the detailed design phase of steel box girder bridge and proposes ways to generate semantic information of components through Industry Foundation Classes (IFC), a data model for Building Information Modeling (BIM). The classification of components of steel box girder bridge was performed to define information items required for identifying semantic information based on IFC, and spatial information items based on topology and physical information items based on functions of components were classified to create additional properties that does not support IFC by applying user-defined property set within the IFC framework. Steel box girder bridge information model based on IFC was implemented through BIM software and semantic information input interface, which was developed in this study to examine the effectiveness of the additionally created user-defined property. Furthermore, the quantity take-off of components was performed through information model of steel box girder bridge, and the applicability of the proposed method was tested by comparing the quantity take-off based on design document with the result.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.23-26
• /
• 2007

In this study, recently it is urgently required that demolition waste concrete has to be recycled on the construction because urban development is accelerated and redevelopment project is rapidly expanded, production quantity of construction and demolition waste concrete is being increased. On the other hand, it has to be solved urgently the unbalance of demand and supply about the fine aggregate because the sea sand is restricted by exhaustion of river sand and intensification of environment influence evaluation. Therefore, the purpose of the study was to show the performance of the apparatus developed by the study and to propose the direction of the optimum operating conditions by having an experimental and positive evaluation about quality of recycled sand produced to develop a separating and selecting device of impurities for recycling of construction wastes which can have a bigger improvement of economical efficiency, productivity, environmental property and quality through a basic property of matter of recycled sand by each operating condition of sand flux in comparison with the existing production system of recycled sand.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.209-215
• /
• 2018

Recent research in animal behavior has shown that gradient information plays an important role in finding food and home. It is also important in optimization of performance because it indicates how the inputs should be adjusted for maximization/minimization of a performance index. We introduce perturbation as an additional input to obtain gradient information. Unlike the typical approach of calculating the gradient from the derivative, the proposed processing is very robust to noise since it is performed as a summation. Experimental results prove the validity of the process of spatial gradient acquisition. Quantitative indices for measuring the effect of the amplitude and the frequency are developed based on linear regression analysis. Drones are very useful for environmental monitoring and an autonomous path planning is required for unstructured environment. Guiding the drone for finding the origin of the interested physical property is done by estimating the gradient of the sensed value and generating the drone trajectories in the direction which maximizes the sensed value. Simulation results show that the proposed method can be successfully applied to identify the source of the physical quantity of interest by utilizing it for path planning of an autonomous drone in 3D environment.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.160-166
• /
• 2014

Patent and utility indicate international competitiveness in the knowledge-based society of the $21^{st}$century where both the quantity and quality of the nation's scientific intelligence and innovative technology represent key criteria to evaluate its strength. Thus, discerning the trends of patents is inevitable for further development. This research is centered on apprehending the technological current of the functional clothing of Korea, through an analysis of patents and utility models. The number of patent applications in Korea was low until the mid-1990s. However, it began to grow rapidly in the 2000s and the number of patents surpassed the number of utility starting in 2006. The technological level of invention in this field has been turned into a higher level. The IPC code with the strongest application was the field related to temperature controllable clothing (A41D 13/005), followed by surgeon or patient apparel related fields (A41D 13/12), and reflective or luminous safety devices (A41D 13/01).The main technological idea was to give functionality that could protect the human body from various hazards and represents the goal of various applied techniques. About 66% of domestic patent applications belong to individuals; however, the proportion of corporate or institutional applications(including universities) remains poor. Consequently, more systematic and long-term support for research on patents is required.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.2
• /
• pp.31-38
• /
• 2005

Flowable fills are self-leveling, liquid-like materials, and self-compacting to 95-100% of the maximum unit weight. Benefits of flowable fills include limited required labor, accelerated construction, ready placement at inaccessible locations, and the ability to be manually re-excavated. Applications for flowable fills include utility trenches, building excavations, underground storage tanks, abandoned sewers and utility lines, and filling underground mine shafts The objective of this study is to estimate engineering property of flowable fills made of soil mixed with recycled stylofoam and stabilizer for using geotechnical field. For this study, the uniaxial compression test, flowable test, and model tests were performed. Based on the results of the tests, the following conclusions are : fills made of soil mixed with recycled stylofoam and stabilizer can be used as flowable fills, minimum stabilizer quantity for using flowable fills ranges from 1.0($kN/m^3$) to 1.2 ($kN/m^3$).

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.107-126
• /
• 2016

The parties in International Sale of Goods including Korean Firms Should note ; The buyer must pay the price for the goods and take delivery of them as required by the contract and CISG. The obligations mentioned in Article 53 are primary obligations which are to be fulfilled in the normal performance of the contract. The buyer has to take delivery at the respective place within a reasonable period after this communication since he cannot be required to take delivery immediately. Refusing to take delivery in case of delay not constituting a ground for avoiding the contract makes no sense, since this would lead to even later delivery. The buyer's obligation to pay the price includes taking such steps and complying with such formalities as may be required under the contract or any laws and regulations to enable payment to be made. International sales contracts frequently prescribe that the buyer has to act in advance, that is before the seller starts the process of delivery. Such acts may be either advance payments or the procurement of securities for payment as letters of credit guarantees. On the other hand, The seller deliver the goods hand over any documents relating to them and transfer the property in the goods, as required by the contract and CISG. The seller must deliver goods which are of the quantity, quality and description required by the contract and which are contained or packaged in the manner required by the contract. Except where the parties have agreed otherwise, the goods do not conform with the contract unless they are fit for the purposes for which goods of the same description would ordinarily be used are fit for any particular purpose expressly or impliedly made known to the seller at the time of the conclusion of the contract, except where the circumstances show that the buyer did not rely, or that it was unreasonable for him to rely, on the seller's skill and judgement. The buyer may declare the contract avoided if the failure by the seller to perform any of his obligations under the contract or CISG amounts to a fundamental breach of contract. The seller may declare the contract avoided if the failure by the buyer to perform any of his obligations under the contract or CISG amounts to a fundamental breach of contract.