• 대한가정학회지
• /
• 제42권6호
• /
• pp.111-121
• /
• 2004

This study focused on the development of creative materials by applying tapestry to produce original and high-grade dresses with consideration the modems' tendency to place high value on personal taste and style. The development remained sensitive to current trends and attempted to expand into high value-added dresses. Materials in modem fashion design, as a basis of the fashion industry, can lead to a current of new fashion and produce novel and creative ideas by stimulating the designers' creativity. Designers can diversely express a form according to their intention, since tapestry allows the expression of various feelings of texture and forms according to the combination mode of technique, structure and materials on a basic plane. Moreover, tapestry encrourages the development of varied designs because it can effectively display the texture and color of a textile surface through the careful selection of materials even under the same technique. Tapestry can apply forms similar to a textile's basic structure to fashion design and can create high added value with the merit of being 'handmade'.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.99-101
• /
• 1999

To improve the texture and the hardness of Ni substrates, we added impurities such as Mn, Fe, Co, Cu and Cr and investigated the effect of impurities on the texture and the hardness of Ni tapes. The Ni tapes with 0.2% Co, Cr, Cu, showed poor in-plane textures. However, the Ni tapes with 0.1 ${\sim}$ O.2% Mn (or Fe), showed much better textures. We'll describe the detailed effects of the amount of Mn impurities.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.447-454
• /
• 2009

Rate-independent crystal plasticity model suffers from the non-uniqueness of activated slip systems and the determination of the shear slip rates on the active slip systems. In this paper, a time-integration algorithm which circumvents the problem of the multiplicity of the slip systems was developed and implemented into the user subroutine VUMAT of a commercial finite element program ABAQUS. The magnitude of the slip shears on the active slip systems in f.c.c Cu single crystal aligned with the specific crystallographic orientation was investigated to validate our solution procedure. Also, texture developments under various deformation modes such as simple compression, simple tension and plane strain compression were compared with the results of the rate-dependent model by using the rate-independent crystal plasticity model. The computation time employing the rate-independent model is much more reduced than the those of the rate-dependent model.

• 열처리공학회지
• /
• 제7권2호
• /
• pp.111-117
• /
• 1994

Effect of rapidly solidfid 6.5wt%Si-Fe alloy annealed in the sulfur atmosphere were studied. The ribbons Which were showed with random structure at the received state, were developed into(110) texture in the heat treatment of the vacuum atmosphere, into (100)texture in the sulfur atmosphere. After the ribbon was continuously annealed in the vacuum atmosphere for 3 min. at $1100^{\circ}C$, and sulfur atmosphere for 1hr at $1175^{\circ}C$, grain size of (100)plane was grew to 4-8mm and the coercive force was decreased to 2-4A/m remarkably.

• 디지털콘텐츠학회 논문지
• /
• 제1권1호
• /
• pp.53-64
• /
• 2000

본 논문은 Y/C 비트 평면합 영상을 대상으로 블록에 기반한 영상 분할을 수행함으로써 우수한 분할 성능을 얻을 수 있는 칼라 영상 분할 기법에 관한 것이다. 우선, R, G, B 영상들 간의 차분 성분들의 절대값을 구하여 합산한 후, 이를 정규화하여 색차합 영상을 구한다. 다음으로, 화소 단위로 휘도 영상의 상위 2비트와 정규화된 색차합 영상의 상위 6비트를 비트연산하여 Y/C 비트 평면합 영상을 얻는다. 이후, 기설정된 크기의 블록으로 분할된 Y/C 비트 평면합 영상의 각 블록을 질감 블록과 단순 블록 및 에지 블록으로 분류하고 각 유형의 블록별로 병합한 후, 기설정된 마커 배정 규칙에 따라 선택적으로 마커를 부여한다. 마지막으로, 마커가 부여되지 않은 블록을 대상으로 화소 단위의 워터쉐드 알고리즘을 적용함으로써 정교한 분할 결과를 얻을 수 있다. 컴퓨터 시뮬레이션 결과를 통해 고찰할 때, 제안된 방법은 질감 영역에서의 과분할의 문제와 과도한 연산량의 부담을 효과적으로 경감시킬 수 있다. 더불어, 영상 분할용 파라미터들의 민감도가 낮아 서로 다른 화소 분포 특성을 갖는 영상들에 전역적인 파라미터를 사용할 수 있을 뿐만 아니라 특히, Y/C 비트 평면합 영상에 반영된 색차 성분에 힘입어 저대조 경계면에서의 분할 특성을 현저히 개선시킬 수 있는 이점이 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.531-534
• /
• 2002

NiO buffer layers for YBCO coated conductors were deposited on hi-axially textured Ni substrates by MOCVD(metal organic chemical vapor deposition) method, using single solution source. To establish the processing condition, oxygen partial pressure and deposition temperature were changed. The surface orientation and degree of texture were estimated by X-ray diffraction, X-ray pole figure and atomic force microscopy. The FWHMs of in-plane and out-of-plane of the NiO films were about 10$^{\circ}$. The surface roughness was a function of deposition temperature. The AFM surface roughness of NiO films is in the range of 3∼10 nm, when NiO films was grown at 450∼530$^{\circ}C$.

• 자원환경지질
• /
• 제23권4호
• /
• pp.411-424
• /
• 1990

Mechanical, physical and petrographic properties of seventeen marble specimens collected from ten marble mines in Korea were investigated. Studied marbles were mainly composed of calcite, dolomite, and various amounts of serpentine, tremolite, olivine, quartz and opaque minerals. Complete and sutured textures were dominant. Compressive strength measured normal to the bedding plane is larger almost two times than that measured parallel to the bedding plane. From the results of Shore hardness test on marbles, water content was an important factor to decrease Shore hardness values. Engineering geological properties, especially, compressive strength, Young's modulus, wear resistance and water absorption could be controlled by the presence of quartz, and the type of marble texture. Water absorption-porosity, compressive strength-Young's modulus, and impact strength index-Los Angeles abrasion couples show good correlation. According to the comparative utility as commercial stone, it could be concluded that marbles from the Banglim mine, Songbo mine, Kwangdeok mine and Bongjeong mine were superior to that of other studied marbles.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.790-791
• /
• 2006

The fracture behavior and mechanical characteristics of sintered rare-earth magnets were investigated. It shows that the fracture behavior and bending strength of the magnets obviously exhibit anisotropy. Sm-Co magnets tend to cleavage fracture in the close-packed (0001) plane or in the ($10\bar{1}1$) plane. The fracture mechanism of $Nd_2Fe_{14}B$ magnet mainly appears to be intergranular fracture. The anisotropy of fracture behavior and mechanical strength of sintered rare-earth magnets is caused mainly by the strong crystal-structure anisotropy and the grain alignment texture. The effects of Nd content, and Pr, Dy substitution on the impact stability of $Nd_2Fe_{14}B$ magnets were also reported.

• 대한의용생체공학회:의공학회지
• /
• 제5권2호
• /
• pp.121-126
• /
• 1984

A new approach to texture classification for quantitative ultrasound liver diagnosis using run difference matrix was developed. The run difference matrix comprised the gray level difference along with a distances. From this run difference matrix, we defined several vectors and parameters such as DOD, DGD, DAD vector, SHP, SMO, SMG, LDE, LDEL etc.Each parameter values calculated in fatty, cirrhotic, normal and chronic hepatitic liver images were plotted in a plane and we found that RDM method was more sensitive to small structural changes than the conventional run length method and showed improved classification ability between the diseases.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1410-1420
• /
• 2005

The purpose of this study was to analyze characteristics of effective expression on T-shirts pattern by peirce's semiotic theory. The methods of this study was to analyze 721 T-shirts patterns in designer's collection from 2000 to 2004. The results of this study were as follows: First of all, iconic expression showed high frequency after 2000. Characteristics of effective expression were as follows: In geometric expression, repetition was presented as a symbolic sign by regular proportion and rule of dot, line, plane, irregularity, mixture of irregular dot, line, plane. Mixed expression was presented as a iconic and symbolic sign by collage, mixture of dot, line, plane, icon and letter. In iconic expression, simplification of iconic sigrl was presented as a iconic sign by simplification of form, color, texture, realistic expression using digital as a iconic sign, and symbolic face, body as a symbolic sign. Pop art's expression was presented as a iconic sign by a cartoon and commercial character and illusion was presented as a iconic sign. In letter's expression, brand logo was presented as a symbolic sign by transformation of letter's design, a symbolic sign of numeral by transformation of size, thickness, form, color. Symbolic message phrase was presented by slogan, fashion trend, brand image, descriptive indication message as a index sign by using icon or singleness. In conclusion, characteristics of effective expression on T-shirts pattern will present not only the theoretical foundation to raise the value added, but also the information about beauty sense of times, political and social value.