• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.469-479
• /
• 2003

A novel branched wax has been developed for the control of the hardness of oil-wax gels. Using this wax, glossier application and smoother texture but tough lipstick can be obtained. Oil-wax gels are oily solids composed of liquid and crystalline solid oils (waxes). They are widely used in various cosmetic products, especially lipsticks. The control of gel hardness is one of the most important techniques in improvement of the lipstick quality. Addition of small amounts of commercial branched paraffin wax (e.g. microcrystalline wax, b-PW) to n-paraffin wax (n-PW) has been commonly used to increase gel hardness. However, gel hardness is very sensitive to the quantity of b-PW and the gel obtained is not always hard enough for practical use. In this study we examined the relationship between the gel hardness and the properties of the wax crystal in the gel. We have found that, when b-PW is added to n-PW, the wax crystal size becomes smaller (hardening the gels) and its crystallinity is decreased (softening the gels) simultaneously. Considering this result, we have developed a novel branched wax, Bis(polyethylenyl)- tetramethyldisiloxane (named ESE). ESE molecules are composed of a central tetramethyldisiloxane unit (branch unit) with polyethylene units at both ends. The central unit may suppress crystal growth while the ends are expected to prevent a decrease in wax crystallinity during crystallization. When ESE is added to n-PW, the wax crystal obtained becomes smaller without decreasing in crystallinity; consequently, the gel hardness is dramatically increased. By using ESE, the total amount of wax in a lipstick can be decreased by 30％ without spoiling the stick toughness, thereby achieving glossy application and smooth texture.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.628-634
• /
• 2016

The cold rolling workability and mechanical properties of two new alloys, designed and cast Al-5.5Mg-2.9Si and Al-7Mg-0.9Zn alloys, were investigated in detail. The two alloy sheets of 4 mm thickness, 30 mm width and 100 mm length were reduced to a thickness of 1 mm by multi-pass rolling at ambient temperature. The rolling workability was better for the Al-7Mg-0.9Zn alloy than for the Al-5.5Mg-2.9Si alloy; in case of the former alloy, edge cracks began to occur at 50% rolling reduction, and their number and length increased with rolling reduction; however, in the latter alloy, the sheets did not have any cracks even at higher rolling reduction. The mechanical properties of tensile strength and elongation were also better in the Al-7Mg-0.9Zn alloy than in Al-5.5Mg-2.9Si alloy. Work hardening ability after cold rolling was also higher in the Al-7Mg-0.9Zn alloy than in the Al-5.5Mg-2.9Si alloy. At the same time, the texture development was very similar for both alloys; typical rolling texture developed in both alloys. These differences in the two alloys can primarily be explained by the existence of precipitates of $Mg_2Si$. It is concluded that the Al-7Mg-0.9Zn alloy is better than the Al-5.5Mg-2.9Si alloy in terms of mechanical properties.

• Korean Journal of Food Science and Technology
• /
• v.49 no.1
• /
• pp.85-89
• /
• 2017

This study was conducted to prevent hardened texture in retorted frozen seafoods such as small octopus, squid, and top shell by adding sorbitol; the strength of mechanical hardness and other qualities were measured. The hardness of the 3 kinds of seafood pretreated with 2-4% (w/w) sorbitol solution decreased by 9-36% compared to the control. The hardness of retorted frozen octopus, squid, and top shell treated with sorbitol solution upon freezing significantly decreased to 1670, 1015, and $521g_f/cm^2$ compared to levels in untreated food of 1841, 1291, and $815g_f/cm^2$ (p<0.05), respectively. Yields based on weight in retorted seafood treated with sorbitol were increased by 2-5% compared to untreated samples. Additionally, the overall preference of texture was 0.4 points higher than that of control samples in descriptive sensory evaluation (p<0.05). The tissue softening of pretreated seafood was based on decreased dewatering due to the formation of small ice crystals during freezing as a result of sorbitol treatment.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.461-465
• /
• 2016

In order to prevent the blackening and texture softening of heated shrimp, the pH was adjusted by soaking shrimps in acidic and alkali solutions, and their qualities were evaluated. The lightness of shrimps pretreated with 0.2% (w/w) citric acid and 0.05% (w/w) ascorbic acid solution increased by 20% compared to that of the control. The strength of mechanical hardness of shrimps soaked in acetic acid and phosphate solution (pH 6.0) was significantly higher ($1209g_f$) compared to that of untreated shrimp ($801g_f$; p<0.05), and the overall preference of texture was 0.4 points higher than that of the control in the descriptive sensory evaluation (p<0.05). In contrast, soaking in solution of pH 8 exhibited a weak texture hardening effect ($855g_f$). Additionally, the hardness of the heated shrimp after soaking at an adjusted pH of 4.0 increased to $4046g_f$, but the yield based on weight decreased to 38% compared to that of untreated shrimp (70%; p<0.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1903-1907
• /
• 2010

Drying curves for raw Alaska pollack seemed to follow typical food dehydration process with a very short initial settling down period. It was evident that there are some differences in drying rates between each part of fish body showing the highest drying rate for fish head followed by that for fish skin and that for flesh, presumably because of differences in water holding capacity of the components of each part. Specifically, the drying curve of fish flesh revealed that a boundary layer, thereby, a time period, existed which showed a big difference in moisture content and/or water activity as drying proceeds. The boundary layer in fish flesh with high moisture content between the layer contributes to reduce drying rate mainly as a consequence of protein aggregation resulting in hardening of fish flesh. The first boundary layer in this work appeared to show within several hours after initiation of drying. For Hwangtae, a naturally cyclic freeze-thaw dried and aged Alaska pollack which was popular in Korea, manufacturing process, it is clear that periodic moistening of boundary layer in fish flesh prohibits hardening fish flesh in boundary layer and enables steady moisture diffusion from inside of the fish flesh to surface of the fish body.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1277-1282
• /
• 2013

The effects of pregelatinized rice flour (PRF) as an additive on the textural properties of rice cookies were investigated in this study. PRF was used at 10, 20, 30, 40, 50, and 60% per 100 g of rice flour. The hardness of dough and cookies, as measured by a texture analyzer, increased upon the addition of PRF. In contrast, the moisture content of the dough and cookies decreased upon the addition of PRF. The L value of the dough and cookies decreased upon the addition of PRF, whereas the a value increased upon the addition of PRF. The bulk density of the cookies increased upon the addition of PRF. In addition, the spreadability of the cookies was lower than the control. In the sensory evaluation, rice cookies with 50% PRF showed the highest scores for hardness, brittleness, softness, and moisture. Rice cookies with 60% PRF showed the highest scores for sandiness. Our results suggest that the texture of the rice cookies can be improved by adding PRF.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-130
• /
• 2004

Plant-based cultural assets using straw and grass as household goods of our people's have been used as indispensable tools for practical living for a very long time. However, only a limited number of artifacts were unearthed so far due to tile fragility of the material. For this reason, research on plant-based cultural properties had close to no progress, and the appropriateness of the PEG method, high-grade alcohol method, alcohol--ether-resin method, and Paraloid B-72 used in preserving plant-based cultural properties has not been sufficiently investigated. Therefore, this study examined the weight change rate by applying the methods of Primal MC-76 and vacuum freeze-drying used mostly as a earth-layer hardening material among PEG and acrylic resin, which are applied widely for preservation of waterlogged archaeological wood, as a means to preserve plant-based cultural properties along with the examination of the subject material, and an experiment was also performed on moisture absorption. The findings as a result were, first, the plant-based material being studied was found to be Typha (Typha orientalis Presl). Secondly, the weight change experiment applying $PEG\#400$ and $PEG\#4000$ confirmed a steady increase of weight if PEG -2Step is used for treatment. Third, in preserving all subject materials with soil, treatment with $PEG\#4000$, Primal MC-76, and vacuum freeze-drying showed that tile vacuum freeze-drying method resulted in the largest or $20\%$ reduction in weight, while Primal MC-76 resulted in $18\%$ and $PEG\#4000$ in $8\%$ of weight reduction. It was concluded that, considering the stability of soil measurement, this came to be because resin permeation was carried out along with tile drying process. Fourth, the weight changes were found to be around $10\%$ in various humidity conditions after the preservation treatment. The greatest weight change rate was seen in the case of $PEG\#4000$, particularly having chemicals gush out in a high humidity (RH $84\%$ or higher) environment. In the case of Primal MC-76 and vacuum freeze-drying methods, $6\~8\%$ weight changes were detected, and the lowest weight change was found in the case of the vacuum freeze-drying method. Fifth, as for color changes after treatment, blackening occurred most strongly with $PEG\#4000$, while Primal MC-76 and vacuum freeze-drying manifested colors closest to dry straw or grass. However, the texture of straw was not very evident in the case of Primal MC-76, due to a glossy surface, but vacuum freeze-drying was found to offer tile best result in terms of texture. Putting together the results of the above experiments, vacuum freeze-drying presented after being treated with PEG2-Step the most stabilized changes in weight, while it offered the smallest change in color as well.

• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.282-293
• /
• 2008

The purpose of this study was to acquire basic data on Jeolpyun added with Baekbokryung powder to aid the product's commercial production. Initially a sensory test was performed with consumers to the identify preferred amount of Baekbokryung powder to add according to age. The results revealed that those in their 20's to 40's preferred the 3% treatment, while those 50 and older preferred the 5% treatment. Next, the optimum water content of Jeolpyun was chosen by examining select quality characteristics in samples containing 20, 25, 30, 35 and 40% water while the amounts of added Baekbokryung powder were fixed at 3% and 5%, respectively, as based on the sensory panel results. For the color characteristics of the samples, lightness(L), redness(a) and yellowness(b) values increased in proportion to the added amount of water regardless of the Baekbokryung level. However, the ${\Delta}E$ values of the samples increased with storage time along with the darkening of their surfaces. The samples with high moisture contents, such as the 35 and 40% treatments, maintained a relatively softer texture during 24 hr of storage as compared to the other samples. Also noted was an initial slow increase in hardness up to 12 hr of storage, and then accelerated hardening until 24 hours of storage. Throughout the storage period, th 30% treatment received low scores: the 40% treatment was especially disliked in terms of mashing of the product due to the excess water. Overall, for a soft and moderately chewy product, the optimum Baekbokryung powder and moisture level for Jeolpyuns were suggested as 3 to 5% ranges and 35% respectively. Ultimately, the results of this research will contribute to the possible commercialization of a Jeolpyuns product that contains added Baekbokryung.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.383-391
• /
• 2014

This study was conducted to ascertain the antioxidant properties of Hamcho (Salicornia herbacea L.) and as well as manufacture pettitoes using Hamcho as a natural antioxidant material for diverse applications. The DPPH radical scavenging activities of 25, 50, 100 mg/mL in methanol extracts from Salicornia herbacea L. increased significantly (p<0.05) to 12.8%, 21.6% and 39.1%, respectively. The total phenolic content was $38.58{\pm}4.25{\mu}M$ as tannic acid equivalent for 100 mg/mL of methanol extracts from Hamcho. FRAP value was $448.58{\pm}14.01{\mu}M$ as ascorbic acid equivalent in reducing power. To apply Hamcho to food as a natural antioxidant, pettitoes were prepared with added Hamcho. To manufacture pettitoes added with Hamcho, general quality characteristics of pettitoes added with 0%, 2%, 4% and 6% based on 100 g of pettitoes were determined. In conclusion, mineral components increased according to the added amount of Salicornia herbacea L. Crude protein showed the highest value with 2% added Hamcho. Overall, the addition of Hamcho led to hardening of the meat texture. As a result of measuring color in terms of brightness, redness, and yellowness with chromaticity, the L value (brightness) increased with added amount of Hamcho. There was no significant difference in redness or yellowness. As a result of the sensory evaluation of pettitoes according to addition of Hamcho, the group with 4% added Hamcho showed enhanced overall preference with improved flavor, taste and textural properties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.