• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.313-319
• /
• 1999

The development of deformation texture in FCC polycystalline metals during rolling was simulated by the finite element analysis using a large-deformation, elaatic-plastic, rate-dependent polycrystalline model of crystal plasticity. Different plastic anisotropy due to different orientation of each crystal makes inhomogeneous deformation. Assuming plane strain compression condition, the simulation with a high rate sensitivity resulted in main component change from Dillamore at low rate sensitivity to Brass component.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.326-327
• /
• 2007

A study on the texture and the formability after asymmetric rolled and subsequent heat-treated AA 1050 aluminum alloy sheets have been carried out. The specimens after the asymmetric rolling showed a very fine grain size, a decrease of <100>//ND, and an increase of <111>//ND textures. The change of plastic strain ratios has been investigated and it was found that they were higher than those of the initial Al sheet.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.328-329
• /
• 2007

A study on the texture and the formability after frictional rolled and subsequent heat-treated AA 1050 aluminum alloy sheets have been carried out. The specimens after the frictional rolling showed a very fine grain size, a decrease of <100>//ND, and an increase of <111>//ND textures. The change of plastic strain ratios has been investigated and it was found that they were higher than those of the initial Al sheet.

• 한국주조공학회지
• /
• 제15권4호
• /
• pp.397-407
• /
• 1995

The objectives of this study are first, to expand our understanding of relationship between magnetic properties and microstructural features such as grain size and texture, and second to reduce core loss of Fe-6.5%Si strip through optimizing heat treatment conditions. A rapid solidification technique, planar flow casting(PFC), was adopted to produce Fe-6.5%Si strips. The strips were heat treated under various conditions. The results show that heat treatment conditions can change not only grain size but also (200) texture formation on the strip surface. Variation in magnetic properties of Fe-6.5%Si strip is analyzed in terms of the change in grain size as well as (200) texture on the strip surface. The heat treatment conditions of $1100^{\circ}C$ over 2 hr or $1150^{\circ}C$ $1{\sim}2hr$ in $N_2+5%H_2$ appear to minimize core loss of Fe-6.5%Si strips.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 2008

To investigate the evolution of deformation texture during cold rolling deformation, cold rolling process on a commercial Al-5% Mg sheet was carried out at different rolling reduction ratio. The evolution of annealing texture in cold-rolled Al-5% Mg sheet was also investigated. The evolution of recrystallization texture during annealing process strongly depends on the rolling reduction ratio before heat treatment. Visco-plastic self-consistent (VPSC) polycrystal model was used to predict r-value anisotropy of the cold-rolled and annealed Al-5% Mg sheets. The change of volume fraction for the major texture components was also analyzed.

• 한국전자통신학회논문지
• /
• 제8권4호
• /
• pp.589-593
• /
• 2013

원격 탐사의 SAR 영상을 이용한다면 구름이나 기상 조건의 변화에 관계없이 지속적으로 영상을 얻을 수 있어 해빙 관측에 적합하다. 해빙에는 여러 가지 종류가 있어 이를 분류해서 결과를 관측한다면 종류별 변화를 보다 쉽게 볼 수 있다. 본 연구에서는 감독분류의 최소 거리(minimum distance) 기법을 이용하여 해빙을 분류하였다. SAR 영상을 이용했을 때와 텍스쳐 영상을 이용한 결과를 비교했을 때의 정확도를 비교하였다. Radarsat-2의 텍스쳐 영상을 사용했을 때 전체 정확도가 가장 높았지만, 대체적으로 SAR 영상을 사용하였을 때 전체 정확도가 높게 나타났다.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1077-1085
• /
• 1997

This study was carried out to elucidate the utilization of the fusant for shortening the ripening time by making an observation of the microstructure and the profile of component change. In ripening cheese, moisture content of the sample treated with tested strain is not a remarkable difference among the test samples. With an increase of the ripening time, L. helveticus showed the highest increase in protein content, followed by fusant, and then L. bulgaricus. The fat content of all starters was gradually decreased while it was it was rapidly decreased after 7 days. The pH of all starters was gradually decreased when the ripening time increased. The titratable acidity was greatly increased between a 9th day and a 15th day ripening. In investigating the light microscopic microstructure of ripened cheese samples, the sample treated with fusant indicated little difference from the other starters in decomposition of protein and fat components by microbial enzymes. In SEM observation, the structure of all cheese samples was uniform and the rough texture was converted into smooth texture by the interaction of cheese components and the abscission of single bond in casein matrix when the ripening time is increased. The fusant showed similar results in the examination of component change and its microstructure compared with the other starters. Therefore, it was revealed that the fusant can be partially used as a cheese starter instead of conventional starters by replacing them or combining them together with the other starters for shortening the ripening time.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.739-747
• /
• 2021

This study examined the measurement conditions of the texture profile analysis (TPA) experiments that are typically used to measure the physical properties of sausage. As the measurement conditions (compression ratio and cross-head speed) were changed, the significant differences between the values of textural parameters (hardness, adhesiveness, springiness, cohesiveness, chewiness) of samples changed. Furthermore, among the measurement conditions, there was more variation in the significant difference between the value of samples due to a change in the compression ratio than due to a change in the cross-head speed. The highest variation in significant difference was observed between the values of cohesiveness of samples due to changes in measurement conditions, whereas the lowest variation in significant difference was observed between the values of springiness of samples due to change in measurement conditions. Therefore, it is desirable to provide a clear basis for setting specific measurement conditions for TPA test, since significant differences in the values of textural parameters of samples were caused by differences in cross-head speed or compression ratio, not by a difference in samples, when analyzing the cohesiveness of sausage, especially.

• Geomechanics and Engineering
• /
• 제36권2호
• /
• pp.121-130
• /
• 2024

Many foundation projects are built on red-bed soft rocks, and the damage evolution of this kind of rocks affects the safety of these projects. At present, there is insufficient research on the damage evolution of red-bed soft rocks, especially the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation. Therefore, based on the dual-porosity characteristics of pores and fissures in soft rock, we adopted a cellular automata model to simulate the propagation of these voids in soft rocks under an external load. Further, we established a macro-mesoscopic damage model of red-bed soft rocks, and its reliability was verified by tests. The results indicate that the relationship between the number and voids size conformed to a quartic polynomial, whereas the relationship between the damage variable and damage porosity conformed to a logistic curve. The damage porosity was affected by dual-porosity parameters such as the fractal dimension of pores and fissures. We verified the reliability of the model by comparing the test results with an established damage model. Our research results described the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation and provided a theoretical basis for the damage evolution of these rocks.

• 패션비즈니스
• /
• 제23권4호
• /
• pp.53-67
• /
• 2019

This study investigated the effects of costume styling, color and texture on character expression in the movies "All About My Wife" and "Marriage Blue". As a study method, the main scenes were captured from the DVD image and the costumes of the main characters were analyzed to examine how the costumes express the personality change according to the story development of the characters. The characters in "All About My Wife" and "Marriage Blue" were studied to see how their personality changes as the story develops and how the costume supports the personality change of those characters. It was checked that costume contributes to effectively deliver the emotion of the characters to audience. In the movies, costume plays an important role in completing the character, and styling, color, and texture of the costume are one of the important means of expression. In a movie, costumes, styling, color, and texture contribute towards development of each character's character. And these elements act synergistically by acting simultaneously rather than independently, thus defining the image of the costume and playing a role in building characters. Movie directors persuade the audience by expressing their intentions in various ways. Among them, movie costume is one of the most effective expression tools. The styling, color, and texture of the clothes are practical and effective methodology that will create a character, so I hope that the field of film art will be researched extensively in the future.