• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.44-50
• /
• 2015

This study was performed to optimize the preparation of frozen lotus roots. Prior to freezing, an optimal blanching condition at $100^{\circ}C$ for 5 min was established, based on the microbial growth, texture, total phenolic content (TPC), and sensory evaluation results. The blanched samples were then frozen under various freezing conditions ($-20^{\circ}C$ in a freezer for 2 hr, $-70^{\circ}C$ in a gas nitrogen convection chamber for 7 min, and $-196^{\circ}C$ in liquid nitrogen for 20 sec), and their qualities after thawing were determined. The scanning electron microscopic analysis indicated that the microstructure of the sample frozen at $-70^{\circ}C$ was similar to that of the control sample, compared with the other freezing conditions (-20 and $-196^{\circ}C$). The antioxidant activities of the frozen samples decreased compared to those of the control, but there was no significant (p<0.05) difference among the treatments. In terms of TPC, the samples frozen at -70 and $-196^{\circ}C$ had significantly (p<0.05) higher values than the sample frozen at $-20^{\circ}C$. In addition, the drip loss of the sample frozen at $-20^{\circ}C$ was higher than those of the other frozen samples. These results suggest that freezing at $-70^{\circ}C$ in a gas nitrogen convection chamber can be an optimal freezing method of producing high-quality frozen lotus roots.

• Korean Journal of Food Science and Technology
• /
• v.7 no.4
• /
• pp.187-193
• /
• 1975

A supplemental effect of Undaria Pinnatifida extract on the composite flour prepared from a blend of wheat, barley, sweet potato, potato, and defatted soybean flours was studied in terms of binding properties, cooking test, and sensory analysis. Dry noodle of the composite flour was made by the conventional method and air dried. Instant noodle was prepared in a hot vegetable oil bath after the noodle was made. The standard was made of wheat flour only. 1. The noodle prepared with composite flour (wheat flour : barley flour, 5 : 5) and Undaria Pinnatifida extract (1 or 2%) showed same results of cooking and sensory tests as well as properties of texture as the standard. 2. The mixture of wheat, barley and defatted soybean flour (10%) had a less efficient binding capacity with Undaria Pinnatifida extract. The binding effect was, however, significantly improved with the wheat and barley flour mixture with either sweet potato or potato flour. 3. The instant noodle prepared with the composite flour (either barley, or sweet potato, or potato was mixed with wheat flour up to 70% separately) and hydroxypropyl methyl cellulose (1% as final) showed the higher oil absorption and the sensory results were the same as the standard. Nevertheless, the binding properties and cooking quality were less efficient.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1467-1474
• /
• 2013

To develop a starter culture system for the fermentation of mukeunji, we introduced lactic acid bacteria and yeast isolated from mukeunji into kimchi fermentation as a single or a mixed culture. On evaluating mukeunji flavor, we found that the mixed starter kimchi prepared with two strains, ML17 and MY7, gave the best sensory score. These strains were identified as Lactobacillus (Lb.) curvatus ML17 and Saccharomyces (S.) servazzii MY7 by molecular identification method. The fermentative characteristics of starter kimchi were investigated by measuring changes in the physicochemical and microfloral characteristics during the fermentation. The decrease in pH and increase in acidity in the starter kimchi were faster compared to respective values of control kimchi. There was a gradual decrease in hardness of starter kimchi, which was still slow compared to hardness decrease in control kimchi. Microbial analysis of starter kimchi revealed that Lb. curvatus ML17 and S. servazzii MY7 were the dominant organisms during the entire fermentation period. The lactic acid and citric acid contents of starter kimchi were higher than those of the control kimchi after 90 days of fermentation. By sensory evaluation, the starter kimchi scored higher in appearance, mukeunji flavor, sourness, carbonated flavor, savory taste, texture, and overall acceptability, but lower in off-flavor than the control kimchi.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.69-76
• /
• 2009

This study was conducted to evaluate the physicochemical and sensory characteristics of chiffon cakes made with rice flour ranging from 20-100% in place of wheat flour. The water binding capacity of the rice flour was greater than that of the wheat flour and its fat binding capacity was lower than that of the wheat flour. The batter stability data indicated that the 100% treatment was better than the control, and specific gravity values and specific loaf volumes were lower in the samples with added rice flour. Texture analysis found no significant differences in hardness, adhesiveness, cohesiveness, gumminess, and chewiness between the control and the 100% treatment. In the case of crust color, the rice flour-added chiffon cakes did not show any significant differences for their 'a' values. In addition, their crumb color was not significantly different in terms of both their 'L' and 'a' values. According to the sensory evaluation, there was no significant difference in overall acceptability between the control and the rice flour-added chiffon cakes. The highest sensory scores were obtained by the 100% treatment for overall acceptance and moistness. However, flavor, cohesiveness, and brittleness were not significantly different. These study results show that wheat flour could be replaced by rice flour up to 100% in chiffon cake.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.203-215
• /
• 2011

Geochemical and mineralogical properties of a contamited soil should be taken into account to decide a remediation strategy for a given contaminant because development and optimization of soil remedial technologies are based on geochemical and mineralogical separation techniques. The objective of this study was to investigate the geochemical and mineralogical characteristics of arsenic-contaminated soils. The arsenic-contaminated soil samples were obtained from Chonam gold mine, Gwangyang, Chonnam, Particle size analysis, sequential extraction, and mineralogical analyses were used to characterize geochemical and mineralogical characteristics of the As-contaminated soils. Particle size analyses of the As-contaminated soils showed the soils contained 17-36% sand, 25-54% silt, 9-28% clay and the soil texture were sandy loam, loam, and silt loam. The soil pH ranged from 4.5 to 6.6. The amount of arsenic concentrations from the sequential soil leaching is mainly associated with iron oxides (1 to 75%) and residuals (12 to 91%). Major minerals of sand and silt fractions in the soils were feldspar, kaolinite, mica, and quartz and minor mineral of which is an iron oxide. Major minerals of clay fraction were composed of illite, kaolinite, quartz, and vermiculite. And minor minerals are iron oxide and rutile. The geochemical and mineralogical analyses indicated the arsenic is adsorbed or coprecipitated with iron oxides or phyllosilicate minerals. The results may provide understanding of geochemical and mineralogical characteristics for the site remediation of arsenic-contaminated soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.262-268
• /
• 2014

The management of soil chemical properties is very important to sustainable agriculture of many horticultural crops, including cucumber. This study was conducted to find the optimal soil properties of environmentally friendly agriculture in controlled horticulture. Soil chemical properties of 267 samples were collected from soil in Chungnam Province. The average of pH, EC, OM, available $P_2O_5$, exchangeable K, Ca, and Mg was 6.1, $5.38dS\;m^{-1}$, $34g\;kg^{-1}$, $1,321mg\;kg^{-1}$, $1.50cmol_c\;kg{-1}$, $10.3cmol_c\;kg{-1}$, and $3.4cmol_c\;kg{-1}$, respectively. The organic matter content in silty clay loam was significantly higher than in the other soil textures, whereas the pH, EC, exchangeable K, and Mg in loamy fine sand showed significantly lower among soil textures. The EC value and exchangeable Mg concentration were highest in mountain foot-slope soils. The frequency distribution within optimum range of soil chemical properties was 26.2%, 30.3%, 2.3%, 3.8%, 3.4%, and 6.7% for pH, OM, available $P_2O_5$, exchangeable K, Ca, and Mg, respectively. Especially, excessive portion of available $P_2O_5$ and exchangeable Ca were 94.0% and 94.4%, respectively. The EC value and organic matter content of soil samples were positive correlation with all chemical properties except soil pH. In principle component analysis of chemical properties in soil samples, the percentage of variance explained by PC 1 was 52.2%, while PC 2 explained 21.3% of the variance, for a cumulative total of 73.5%. In conclusion, these results are considered to improve soil nutrient management for sustainable controlled horticulture.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.363-369
• /
• 2014

This study was conducted to investigate the quality characteristics of tofu prepared with addition of cowpea meal (CPM). Any significant difference of L-value between control CPM-O and treatment CPM-I, CPM-II and CPM-III could not be seen as addition ratio of CPM increases (p < 0.05). The b-value of CPM-III (75%) has shown the least value of 14.26, and it has decreased as addition ratio of CPM increases. The result of texture profile did not show any significant difference between control CPM-O and CPM-Iexcept in the case of cohesiveness. The pH range of treatments was 6.36~6.52, which showed no significant difference from controls. The values of turbidity were 1.46~1.81, which had increasing trend as addition ratio of CPM increases. The total bacterial count of CPM-III was $4.40{\times}10^2CFU/g$, which showed significant difference from the control. No Esterichia coli was detected in the control and the treatments. The result of sensory analysis of the treatment CPM-I did not show any significant difference from the control, which implied the treatment CPM-Iwas found to be suitable at the tofu making using byproducts of cowpea-jelly making. Isoflavone glycoside (IG) was contained more on the order of genistin, daidzin, and glycitin, and the content decreased significantly as addition ratio of CPM increases. The content of isoflavone-aglycone (IA) was less than IG, but showed similar behavior of addition ratio of CPM.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.650-658
• /
• 2006

This study investigated the effects on the quality characteristics of the korean steamed rice cake, Seolgiddok of the addition of aloe powder at 0%, 1.5%, 3.0%, 4.5% and 6.0% and 4-days storage. The moisture content of the control 0% aloe, steamed rice cake was 47.76%, and steadily decreased with increasing powder addition to the lowest of 37.38% for the cake with 6.0% added. The moisture content was decreased with extending storage time in both the control and powder-added groups. The cohesiveness, springiness, adhesiveness, gumminess and chewiness of the cake tended to decrease with increasing powder content, while the hardness increased with both increasing powder content and extending storage time. The Hunter color value L in the chromaticity of the cake was significantly decreased with increasing powder addition. The a value of the control, 0% aloe steamed cake was -0.86, but became positive with red color with increasing powder content, The b value was significantly increased with increasing powder content. The powder addition inhibited the increase in bacteria number. The sensory characteristics of the cake. such as color, aloe flavor and taste, and bitterness were increased with increasing powder content, while the moist and soft feeling of the cake were more highly evaluated at lower powder content. The overall taste was judged to be best for the sample with 3% added powder. Accordingly, it was expected that a highly functional and healthy product with improved quality might be developed by the addition of aloe powder to the Korean steamed cake, Seolgiddok.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.593-603
• /
• 2010

Most spatial data acquisition systems employing a set of frame cameras may have suffered from their small fields of view and poor base-distance ratio. These limitations can be significantly reduced by employing an omni-directional camera that is capable of acquiring images in every direction. Bundle Block Adjustment (BBA) is one of the existing georeferencing methods to determine the exterior orientation parameters of two or more images. In this study, by extending the concept of the traditional BBA method, we attempt to develop a mathematical model of BBA for omni-directional images. The proposed mathematical model includes three main parts; observation equations based on the collinearity equations newly derived for omni-directional images, stochastic constraints imposed from GPS/INS data and GCPs. We also report the experimental results from the application of our proposed BBA to the real data obtained mainly in urban areas. With the different combinations of the constraints, we applied four different types of mathematical models. With the type where only GCPs are used as the constraints, the proposed BBA can provide the most accurate results, ${\pm}5cm$ of RMSE in the estimated ground point coordinates. In future, we plan to perform more sophisticated lens calibration for the omni-directional camera to improve the georeferencing accuracy of omni-directional images. These georeferenced omni-directional images can be effectively utilized for city modelling, particularly autonomous texture mapping for realistic street view.