• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.341-353
• /
• 2019

Quercetin is one of flavonoids widely distributed in the plants and well known to have antioxidants, antiinflammatory, antimicrobial properties. In this study, alginate sponge containing quercetin-encapsulated nanocapsules was prepared by miniemulsion polymerization, dyring/crosslinking method and their bioactive characteristics were investigated. Alginate sponge containing quercetin-encapsulated nanocapsules were evaluated using a field emission scanning electron microscope(FE-SEM), a high performance liquid chromatography, cell viability, DPPH radical scavenging activity and antibacterial activity. The study indicates that alginate sponge containing quercetin-encapsulated nanocapsules had significant antioxidant, antiinflammatory and antibacterial activities. This study suggested that alginate sponge containing quercetin-encapsulated nanocapsules can be a potential candidate for medical materials.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.164-174
• /
• 2016

In this study, dye-encapsulated microcapsules were produced by emulsion polymerization using styrene monomer. The study showed that the average size of microcapsules were $2{\sim}5{\mu}m$ in normal distribution. These microcapsules induced pale yellow(A12) and reddish yellow(B24) color by thermochromic fluoran yellow(dye A) and red(dye B). These microcapsules were changed to dark yellow(A12) and scarlet(B24) color depending on temperature change. The weight of microcapsules decreased by 7% to 11% during the heating ranges from $320^{\circ}C$ to $350^{\circ}C$ implying that the styrene microcapsules had thermal stability upto $300^{\circ}C$.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.279-286
• /
• 2013

Application properties of ultra light weight silica aerogel toward polyurethane membranes were investigated. From the results of pre-milling process of the silica aerogel, the solvent for dispersion of the aerogel was determined for methyl ethyl ketone and its content in the solvent was determined by 30%. Using this aerogel dispersion, the polyurethane membranes were prepared according to the mixing amount of silica aerogel and various properties of the membranes were investigated. As results, the optimum mixing amount of silica aerogel inside polyurethane membranes was decided at 11%, because the improvement of light weight property, air permeability, and moisture vapor permeability were improved upto 11% of silica aerogel content, maintaining the water penetration resistance almost unchanged.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.258-268
• /
• 2021

This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.32-38
• /
• 2014

There has been increasing demand to the eco-friendly materials such as phytoncide which is extracted to plants in the textile industry, recently. It is interesting that alginic acid sodium salt(Alg-Na) is used to eco-friendly binder for the functional capsule finishing. In this study, we made PEO/Alg-Na blend solutions of various ratio and observed the changing binding property of the blend solutions according to PEO contents through FT-IR, DSC, contact angle, peel strength, etc. The viscosity of Alg-Na/PEO blend solutions increased with increase of contents and the viscosity quickly increased with increase of PEO content in Alg-Na 5% content, specially. It is shown that the hydrogen bond peak by blend of Alg-Na and PEO found through FT-IR analysis but the peak decreased in PEO above 60% content. And the peel strength was predominant in PEO 50% ratio.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.245-254
• /
• 2020

The sheet molding compound composite has been applied divers section. This paper reports processing of carbon fiber reinforced thermosetting composite with diverse resins and which was composed of chopped carbon fiber (30 ~ 60 wt%). Normally the paste that the viscosity is over 15,000 cps has been used in traditional Sheet molding compound (SMC) machine. In this research, SMC machine was designed to make Carbon-sheet molding compound (C-SMC) prepreg which was composed with low viscosity resin (1,800 ~ 2,500 cps increase up to 10,000 cps after aging). In order to confirm the optimal processing condition. Mechanical strength tests including tensile test, shear test, impact test, flexural strength test were conducted on C-SMC composites. Plus we identified the correlation between the mechanical properties and prepreg processing condition (carbon ratio and applied resin).

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.159-165
• /
• 2000

This study surveys the fabric mechanical properties according to the weaving design & finishing conditions of wool fabrics for quality control in the process. For this purpose, 8 kinds of Twill groups and 3 kinds of Plain groups weave fabrics, totally 428 woven fabrics are prepared with change of the yarn count, density and finishing method. Fabric thickness, bending rigidity, extensibility, shear rigidity, formability of the fabrics were measured and discussed with weaving design & finishing conditions.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.74-78
• /
• 1997

This study was performed to obtain the basic data of the effect of antimicrobic finishing on chrome-tanned leather for apparel. This study was to examine the effect of conditions of antimicrobic finishing on content of antimicrobic agents in the specimen by analysis and on the antimicrobic activity of specimens by means of shake flask test. The optimum conditions of antimicrobic finishing were found to be ; the concentration of Si-QAC-0.5%(o.w.f.), treating time-30minute, and drying method-air drying.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.386-389
• /
• 2001

Researches for nanotechnology are inherently multidisciplinary since on the biological, and chemical components and systems are essentially the same. As the synthetics develop, many people are concerned about the influences of natural environment and hygiene of manufactures. By this reason, a new area has developed in the realism of textile finishing. The aim of this work is to consolidate nanotechnology into bacteriostasis of textile. (omitted)

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.