• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.30-34
• /
• 2008

To evaluate the mechanical properties of in-service materials, tensile properties measurement using small-scaled specimen has been carried out. Tensile testing specimens with various dimensions, including standard and sub-size specimen specified in ASTM and ISO and small-scaled specimen, were prepared. Tensile strain in small-scaled specimen was measured using micro-ESPI system set up in this study. This system was used in the specimen with the parallel length of 2 mm and in subsequently measuring the strain under tensile loading. From each type of tensile specimen, stress-strain curves were determined. The dimension effect of the tensile properties was investigated comparing the tensile results obtained from standard specimens and small-scaled specimens. It was shown that the tensile strength for the small-scaled specimen is lower by 15% than those for the standard specimen.

• IE interfaces
• /
• v.7 no.2
• /
• pp.25-30
• /
• 1994

ISO 9000 is a series of several standards(ISO 8402, 9000, 9001, 9002, 9003, 9004,...). ISO 9000 is a standard explaining fundamental concepts, defining important terms, and providing guidance for selecting among the other standards. ISO 9001, the most comprehensive standard to ensure quality in design, development, production, installation, and servicing. ISO 9002 is used to assure conformance to specification, installation and servicing. ISO 9003 has the least requirement among three standards and applies to inspection and final testing. ISO 9004 is a standard developed for internal use only and not applicabe to contractual arrangements. In this paper, quality system requirements for ISO 9000 series are also specified.

• International Journal of Safety
• /
• v.8 no.2
• /
• pp.31-36
• /
• 2009

In accordance with the development of recent computer technology, railway signaling software became more complex for the intellectualization. Therefore the importance and dependency of railway signaling system on the computer software is getting more increased further, and the testing for the safety and reliability of railway signaling system software became more important. It is started to become influential as very important issue for the reliability and safety of vital embedded software like railway signaling system. The software coding which can have an effect on the safety at the coding level of software shall not be included preferentially, for the safety of software, and must be checked. This thesis suggested an automated testing tool for coding rules on this railway signaling system software, and presented its applied result for railway signaling system software. The testing items in the implemented tool had referred to the international standards in relation to the software for railway system and MISRA-C standards. This automated testing tool for railway signaling system can be utilized at the assessment stage for railway signaling system software also, and it is anticipated that it can be utilized usefully at the software development stage also.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.57-59
• /
• 2008

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.642-649
• /
• 2001

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.183-192
• /
• 2007

The various environmental regulation directives such as RoHS (restriction of hazardous substances in electrical and electronic products) and WEEE (waste from electrical and electronic equipments) are practically used as the technical barrier in international trade (TBT) of vehicles and electrical and electronic products recently. Regarding such an environmental regulation, Korea Research Institute of Standards Science (KRISS) organized a proficiency testing scheme to establish the reliability of measurement results produced by the relevant research institutes and test laboratories in Korea. Participants were 31 laboratories related to production of the electrical and electronic equipments and mobile vehicles. Two polypropylene samples of pellet type were employed as the proficiency testing materials (PTMs). Cadmium and lead were the analytes chosen among six components regulated in European Union (EU) RoHS directive. The PTMs were sent to the participants by post on September $1^{st}$ 2006, and deadline for results submission were October $10^{th}$ 2006. The results of each laboratory were evaluated in comparison with KRISS reference values using Robustic Z-score and Youden plot methods. The results of the various sample digestion methods were also compared. Most of participants reported good agreement within 10 % range of reference values. However, results from several laboratories showed significant biases from reference values. These laboratories should establish the quality assurance system for improvement of the measurement reliability.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1156-1162
• /
• 2007

This paper describes overall background and current status of the establishment of multi axial fatigue testing system for rail fastening component/system. With above viewpoint, general features of rail fastening system, domestic/international testing standards, main features of testing system, application plan, etc. are summarized.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.36-46
• /
• 2008

This paper is to study on the Construction of Test circuit and Unification of Experiment Method for high voltage gas-insulated load switch using high power testing system The high power testing system is a equipment to verify electrical and mechanical performance on electrical product. The system consist of short-circuit generator, back-up breaker, making switch, impedance, high voltage transformer, low voltage transformer, measuring and protection system, etc. Using this system, we can test related to high power, for example, short-time current test, active load Current test, magnetizing Current test, capacitive current test, closed loop current test, etc. Standards of high voltage gas-insulated load switch that is in use domestic distribution line are ES 5925-0002, IEC 60265-1, IEC 62271-1 and IEEE C 37.74, etc. In this paper, we standardized on the test procedure, organization of test circuit and analysis of measured data prescribed many difference standards, and applied this test method to 600[MVA] high power testing system. So that we can test the load switch satisfied standards.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.626-634
• /
• 2011

The investigation of concrete structure typically relies on visual inspection which is one of the basic inspection techniques. Image processing techniques play a crucial role in the growing field of automatic surface inspection technique. However, kinds of inspection equipment, environmental condition and detection algorithm have much influence on the reliability of inspection result. This paper proposes a verification method and testing procedure for the reliability of inspection results and surveys characteristics of image acquisition systems and crack inspection algorithms.