• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.39-48
• /
• 2000

Hyperlipemia is the most leading risk factor of cardiovascular disease which is the main cause of death in Korea. However, there is a tendency to neglect the prevention and treatment since it has no specific symptoms. It has been reported that the level of serum-lipid can be lowered by the improvement of eating habits. Therefore, it is highly likely that the development of programs on the improvement of eating habits through behavioral theory is required to the community nursing practice. The theory of planned behavior, which assumes that human behaviors are determined by one's intention to carry out the behavior, can be characterized by the point that behaviors are not only individual factors but also social behaviors relating to subjective norms. It is widely recognized that this theory has a high predictability on health behavior due to it's simplicity clearness, and measurability as well as high quality of being general. Thus, the theory of planned behavior could be useful in developing a model of a health promotion program to the change of behaviors of the risk group of cardiovascular disease. Consequently, based on the theory of planned behavior, the purpose of this study is to develop an intention promotion program of the diet, and then to testify the effects. The sample of this study consisted of 26 industrial workers who had proved hyperlipemia from a medical examination in 1996 (experimental group 13, control group 13). The intention promotion program, which includes education, monitoring, pressure, counselling on the level of individuals, families and organizations, was conducted for 10 weeks The purpose of this program was to promoting intention of the diet through changes of the prerequisite factors of intention such as behavioral belief, outcome evaluation, normative belief and control belief. When it came to data analysis, the ${\chi}^2$-test and Fisher's Exact test were used to compare the general characteristics between the experimental and the control group, an independent t-test for the other variables. ANOVA was used to the test hypothesis, and the Pearson correlation test for variable's correlation. The results of this study can be summarized as follows ; 1) There was a significant increase in the intention(F=18.51, p=.00) of diet in the experimental group. 2) Diets(F=32.51, p=.001) in the experimental group were better carried out than in the control group. 5) There was a moderate correlation between the intention of diet and performance (r=.587. p=.003). From the results, it can be concluded that the intention promotion program is very effective, leading to the change of health promotion behavior. Above all, it is really valuable that the intention promotion program in this study regards health promotion behavior as a social behavior and that intervention was done on the level of family and organization. Consequently, when performing a health promotion program, social approach elevating the intention should go hand in hand in order to make the program effective.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.833-840
• /
• 2003

The stability of structure, effectiveness of design and construction are very important factors in soil-structure design. The design-parameter is based on the test through laboratory-test and field-test. There are two ways to obtain the design-parameter. One is to through test, and the other is through relative documents and references. Recently, statistics has been used to get reliable data. In this study, Kriging method as Geostatistics and the theory of Bayesian's inference are used and the design-parameters are obtained. As the result of this study to the design-parameter is reliable and information about soil condition and soil properties in design and construction is easily found.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.597-600
• /
• 2002

This paper has been studied expert system using fuzzy theory for fault diagnosis of HDD test systems by detecting systems fault and presenting the way of repair using test history and rule base built via interview from exports. The rules of fault diagnosis of HDD test systems are classified into 2 types, fuzzy and crisp, and these have been serialized to decide whether fault diagnosis be done or not by fuzzy rules and to present the way of repair by crisp rules. And then this paper has designed expert system using fuzzy theory for fault diagnosis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.176-179
• /
• 2005

Spray casting of hypereutectic Al-Si based alloy has been reported to provide distinct advantages over ingot metallurgy (IM) or rapid solidification/powder metallurgy (RS/PM) process in terms of microstructure refinement. Hypereutectic Al-Si based alloys have been regarded attractive for automotive and aerospace application, due to high specific strength, good wear resistance, low coefficient of thermal expansion, high thermal stability, and good creep resistance. In this study, hypereutectic Al-25Si-2.0Cu-1.0Mg alloy was prepared by OSPREY spray casting process. High temperature deformation behavior of the hypereutectic Al-Si based alloy has been investigated by applying the internal variable theory proposed by Chang et al. The change of strain rate sensitivity and Creep transition were analyzed by using the load relaxation test and constant creep test.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.6-16
• /
• 2022

Recent, the issue of the fourth industrial revolution triggered by technological advances has changed the automobile industry centered on internal combustion engines, and quantitative growth of the global automobile market, which has grown rapidly, has been slowing since 2015. These advances in technology are expected to develop beyond the advanced driver assistance system to autonomous driving technology. According to SAE-J3016 published by the Society of Automotive Engineers, the technology of autonomous vehicles is divided into a total of six stages according to the driver's intervention and automation level from 0 to 5. Securing safety for autonomous vehicles is important. But, research on safety evaluation theory and autonomous vehicle evaluation method based on real vehicle test is insufficient. In this study, the longitudinal distance theory equation and continuous test scenario were proposed for the test method of autonomous vehicles for fixed targets, and the real vehicle test was conducted. When comparing the theoretical values compared to the measured values, it was determined that it was reliable with a minimum error rate of 0.484% and a maximum error rate of 7.391%. Using the proposed theoretical equation, it is judged that it can be used as a safety evaluation method in an environment where real vehicle test is not possible because it can grasp the trend in the longitudinal direction in the development stage.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.733-739
• /
• 2023

The purpose of this study verify to the effect of applying the X-ray screening ability rating for security screening persons in Incheon International Airport. Data collected through a evaluation score of 1,034 security screening persons in Incheon International Airport. Data analysis performed using paired sample t-test. The research results found that it was a statistically significant difference pre-test and post-test applying the X-ray screening ability rating. In this article, we asserts that the X-ray screening ability rating is effective in improving the X-ray screening ability of security screening persons. This paper contribute to the academic expansion of motivation theory and self-determination theory. This study is valuable as a preemptive empirical research that provides practical implications about the application of X-ray screening ability rating for security screening persons.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.71-75
• /
• 1999

An approximate similarity theory has been applied to predict the forming load of non-axisymmetric forging of aluminum alloys through model material tests. The approximate similarity theory is applicable when strain rate sensitivity geometrical size and die velocity of model materials are different from those of real materials. Actually the forming load of yoke which is an automobile part made of aluminum alloys(Al-6061) is predicted by using this approximate similarity theory. Firstly upset forging tests are have been carried out to determine the flow curves of three model materials and aluminum alloy(Al-6061) and a suitable model material is selected for model material test of Al-6061 And then and forging tests of aluminum yokes have been performed to verify the forming load predicted from the model material which has been selected from above upset forging tests, The forming loads of aluminum yoke forging predicted by this approximate similarity theory are in good agreement with the experimental results of Al-6061 and the results of finite element analysis using DEFORM-3D.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.3
• /
• pp.61-70
• /
• 2004

N-value by the SPT is one of the key parameter for settlement evaluation. However, if the ground is firm, the usual N-value is not blow count of 30cm depth penetration. In such case, if N-value is more than 50 with 30cm penetration, the N-value 50 is applied for settlement analysis. Therefore, in this study, the modified method of N-value estimation is suggested and compared the settlement by Elastic Theory, and the measured field data by Plate Load Test. As the result of this study, it is shown that the settlement by Elastic Theory with the modified N-value is more accurate than settlement by usual N-value. The application of Elastic Theory for pure sand is also evaluated in this paper.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1041-1050
• /
• 1995

The deformed shape of rod specimen of copper alloys was measured after the high-velocity impact against a rigid anvil and analyzed with one-dimensional theory to determine dynamic yield stress and strain-rate sensitivity which is defined as the ratio of dynamic yield stress to static flow stress. The evvect of two-dimensional deformation on the determination of dynamic yield stress by the one-dimensional theory, was investigated through comparison with the analysis by hydrocode. It showed that the one-dimensional theory is relatively consistent with two-dimensional hydrocode in spite of its simplicity in analysis.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.43-47
• /
• 2001

본 논문은 신경망 이론중 하나인 Adaptive Resonance Theory(ART)을 사용하여 네트워크 상의 불법적인 침입을 탐지하는 기법에 대한 연구이다. ART는 비교사 학습을 하는 신경망으로써, 적응적인 학습능력이 있으며, 또 새로운 패턴에 대해서 새로운 클러스터를 생산하는 능력이 있다. ART의 이러한 특성을 이용하여, 여러 가지 침입패턴을 네트워크상에서 생산하여 학습을 시키고, 또 test 했으며, test 이후에도 on-line 상에서 새로운 공격 pattern도 찾아냄을 보였다. 따라서, 이미 알려진 침입뿐만 아니라 새롭게 발생하는 침입 기법에 대해서도 새로운 rule의 첨가 없이 적극적으로 대처할 수 있을 것으로 예측된다.