• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.809-819
• /
• 2022

This study was conducted to improve the stability of cut slopes of forest roads in granitic weathered soil areas. The study area is a national forest road (road length 28.48 km) in Pyeongchang-gun, Gangwon-do. After data collection, a statistical analysis was performed using IBM SPSS (Ver. 26.0). First, the correlation analysis showed that structure, slope position, soil erosion, slope, and aspect (N, S) were correlated with vegetation coverage (p < 0.05). Elapsed years, slope distance, and aspect (E, W) were found to have no correlation with vegetation coverage. (p > 0.05) Second, one-way ANOVA and Kruskal-Wallis test results showed that vegetation coverage was worse when the slope was located at the top or the middle of the slope than at the bottom of the slope. In addition, the site with sheathing and gabions showed good vegetation coverage when compared with the site without structures. In the case of soil erosion, areas with severe damage and moderate damage showed worse vegetation coverage. Therefore, it is necessary to strengthen the slope angle of the cut soil of the granitic weathered soil area from 1 : 0.5 - 1.2 to 1 : 0.8 - 1.5. In addition, structures such as sheathing and gabions should be installed on granitic weathered land.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.755-764
• /
• 2016

In this paper, to verify the field application of a displacement estimation technique based on the relationship between displacement and strain, static and dynamic field load test are performed on three-span continuous real bridge structures. The superstructure types of the test bridges are IPC girder highway bridge and steel box girder AGT bridge. LVDTs and strain gauges are attached to them; then, the responses due to test vehicle are measured. To obtain the displacement-strain relationship of the test bridges, the bridges are modeled as grillage system with 6 DOFs for the purpose of structural analyses. Static and dynamic displacements, which are estimated using both the calculated displacement-strain relationship and the measured strain signal, agree well with the values measured by LVDT. This study demonstrates that the displacement estimation technique using the strain signal can be effectively applied to the displacement measurement of bridge structures that cross rivers/roads/railways or have high clearance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2049-2056
• /
• 2013

With the advance in information communication, the information age has come, and desire of human being in increasing. In this circumstance, the necessity for design for building of superhighways is arising to improve the mobility in the field of transportation, too. This study was conducted to analyze if driver can drive at a design speed on a superhighway with a design speed exceeding 120km/h. For this study, it was experimented if the running speed that makes a driver feel anxious, increased, when road alignment and standard improved, due to the differences of design speed. For the experiment, 30 subjects were asked to attach brain wave analyzers to bodies. Then, this study compared powers of ${\beta}$ waves generated, when they felt anxious, driving on the roads with different design speeds, and driving virtually through a simulator. Here, Kangbyeonbukro (90km/h), Jayuro(100km/h), Joongang Expressway(110km/h), and Seohaean Expressway(120km/h) were selected as experimental sections. While drivers drove on the Kangbyeonbukro and Jayuro at a speed of 80km/h - 130km/h, on the Joongang Expressway at a speed of 100km/h - 150km/h, and Seohaean Expressway at a speed of 110km/h - 180km/h, powers of anxiety EEGs(electroencephalogram) were compared, and during the simulation driving at the same speed of 110km/h - 180km/h, powers of anxiety EEGs were compared and analyzed. Moreover, the speed when anxiety EEGs increased, was statistically verified through paired t-test. As the result, the speed when anxiety EEGs increased during the simulation driving was nearly 30km/h higher than when they increased during the actual driving on the expressways, and anxiety EEGs increased at the same speed, when subjects drove on the roads with a design speed of 90km/h and 100km/h. It means that there were small differences in road alignment and standard. However, the running speed to make drivers feel anxious was increased at both roads with a design speed of 110km/h and 120km/h. It implies that drivers can drive at a higher speed, as road alignment and standard improve.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.758-764
• /
• 2019

The chassis of the Korean light tactical vehicle adopts a frame-on-body structure that uses lightweight design technology in terms of equipment operating characteristics. Military vehicles are operated in much harsher conditions compared to civilian vehicles, including mountainous terrain, especially steep slopes. Due to this characteristic, frame-welded cracks were found on some military vehicles. Therefore, in this paper, road damage analysis was conducted by identifying various roads including the military unit's road. The result confirmed that the operating environment of some military units' tactical road was much harsher than the endurance road test condition. A solution was derived through defect analysis, design review, and actual vehicle driving test. This study can be used as a reference by suggesting the development direction for the durability test of a new vehicle.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.55-63
• /
• 2007

This research deals with the relations between intersection types and traffic accidents in the case of Korean expressways. The purpose of this research is to test the hypotheses that traffic accidents depend on intersection types and geometric design elements. The main research results are as follows. First, the accident comparisons that are drawn from junctions with interchanges, and trumpet interchanges with other types of interchanges respectively displays no significant meaning. However, the differences among four types of trumpet interchanges are found to be meaningful. In other words, the BO type trumpet interchanges seem to have far more traffic accidents than other types of trumpet interchanges. Second, hypothesis tests show that approximately 90 degree and one lane connection roads have lower accident rates. Based on this research, the following directions can be suggested for the safer types of intersections and geometric design elements in freeway construction. From a road safety point of view, it is advisable not to introduce BO type interchanges. It is also desirable that the intersection angle should be approximately 90 degrees. Furthermore, it would be wise to design one lane roads if the connection road has low traffic volumes.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.45-54
• /
• 2006

The Construction policy of government ever since 1970s have brought the economical growth, but has been causing environmental problems. Most roads were paved either asphalt concrete or portland cement concrete. These types of pavements has caused to rise temperature by making local heat islands in urban during summer time. Recently the wet-mixing solidified soil pavement, a kind of soil-cement, has developed and has been applied to the environment-oriented pavement. The solidified soil wet-mixed is placed on the subgrade along with asphalt concrete and portland cement concrete. Thermistors are laid in these field test pavements. The temperature gradients of these pavements are automatically measured with time. As the results of this test, the equation estimating surface temperature of pavement is proposed by analyzing measured temperature data. It is shown that the temperature change within the surface layer due to the change of air temperature is the greatest in the asphalt mixture and the least in the solidified soil mixture. Since it is proven that this wet-mixing solidified soil pavement emit less radiant heat than other existed pavements. Therefore this type of pavement can be successfully applied to the roads, such as walks, parkways, and bikeways, which are required to be human-friendly and environment-oriented.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.451-458
• /
• 2023

As forest fires continue to increase in scale worldwide, the importance of forest roads in relation to forest fire prevention and suppression has become increasingly evident. To ensure effective functioning during a forest fire disaster, it is crucial to apply appropriate road planning and ensure roads' structural integrity. However, previous studies have predominantly focused on the impact of forest fires on firebreak efficacy and road placement, meaning that insufficient attention has been paid to ensuring the safety of these facilities. Therefore, this study sought to compare the strength of concrete facilities within areas damaged by forest fires over the past three years by using the rebound hammer test to identify signs of thermal degradation. The results revealed that concrete facilities damaged by forest fires exhibited significantly lower strength (15.6 MPa) when compared with undamaged facilities (18.0 MPa) (p<0.001), and this trend was consistent across all the target facilities. Consequently, it is recommended that safety assessment criteria for concrete forest road facilities be established to prevent secondary disasters following forest fire damage. Moreover, continuous monitoring and research involving indoor experiments are imperative in terms of enhancing the stability of forest road structures. It is expected that such research will lead to the development of more effective strategies for forest fire prevention and suppression.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.17-21
• /
• 2020

Over 60% of South Korea's land consists of mountainous topography, and recently, due to earthquakes, localized heavy rains and road development, the risks of rockfalls are getting higher. As of now, rockfall prevention facilities are being constructed in 70% of Korean roads cut slope and rockfall protections account for about 20% of them. Rockfall protection's supporting capacity is defined by combining performance of wire mesh, pillars and wire ropes. For the existing constructed rockfall protection, standards of pillars that can absorb 48~61 kJ amount of energy, wire ropes and wire mesh are presented in Guidelines for the installation and management of traffic safety facilities, Rockfall prevention facilities by Ministry of Land, Transport and Maritime Affairs (2008). However, each factor's correlation of absorption energy is not presented so it is uncertain. This study will conduct vertical drop test and identify adequacy of rockfall protection net of displacement quantity calculation factor which is delta and evaluate rockfall protection net's absorbable energy through standards of overseas performance evaluation criteria.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.57-63
• /
• 2004

In general steel sheet piles are used in the containment system, which are vertical barrier systems for waste disposal and landfill purposes, and roads in excavation for temporary structure. This paper presents case study of the use of an interlocking sheet pile for water and containment. Cut-off Z-type sheet pile joints are investigated to determine their permeability from the field test. Four different joint sealing materials are used in field test. The results showed joint permeability is significant time-dependent and joint-dependent. These are explored and conclusions on permeability characteristics of different sealants are noted. A case study gives a design example as well as suggestion on permeability and water tightness can be implemented in using the sheet pile barrier in civil and environment works. From the test results, the effective sealing programs of sheet pile interlocks are suggested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.393-400
• /
• 2014

In this study, an automatic transmission was developed for a bicycle. This transmission uses the pedal rpm and riding speed information for efficient riding. This transmission was installed on a bicycle using an internally geared hub. The automatic transmission was developed for a beginner to ride with proper gear changes. Indoor ride tests were performed to assess the performance of this transmission. Here, a 'beginner' is defined as a bicycle rider who can maintain a riding power of ~150W with a maximum heart rate of ~80%. Furthermore, 'ride with proper gear change' means that the rider could ride the bicycle while maintaining an efficient pedal rpm by the automatic transmission. One expert and four beginners participated in the ride test. The expert was chosen for the comparison with the beginners. To minimize environmental disturbances, the ride test was performed indoors. In this test, two types of gear changes manual and automatic were tested on two types of roads a road with a gradual incline of 0-3% and a road that simulates the bicycle road along the Han river in Seoul. The results of the ride tests show that the algorithm applied for the automatic transmission helps beginners to ride the bicycle efficiently.