• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.170-176
• /
• 2004

In this study, the relay driver circuit which controls the spacecraft configuration change are implemented and validated. First of all, the specification of the relay driver circuit is defined, and then its circuit meeting the specification defined is designed. In order to verify the design of the relay driver circuit, its circuit was simulated, and then it's confirmed that the relay pulse current and voltage level defined in the specification are obtained, and the results obtained through the functional test of the relay driver circuit are compared and well matched with the simulation results. Also the worst case analysis for confirming the stable operation of the relay driver circuit under the tolerance of each component is performed.

• Journal of The Korean Association For Science Education
• /
• v.22 no.5
• /
• pp.944-956
• /
• 2002

The purpose of this study was to investigate students' conceptions of the simple electric circuit using a battery and a bulb. 19 fourth grade students from a rural elementary school in Korea participated in this study. Data on the children's understandings of electric circuit were collected through three sources; prediction tests, drawing tests and individual interviews. The prediction tests were paper and pencil tests composed of 10 problems, predicting whether bulbs in 10 simple circuit diagrams would light. For each prediction, the children were asked to provide a written explanation of their thinking. The drawing tests consisted of 6 problems. One was to draw the inside of the bulb base, and the others were to make the wire connections between a battery and a bulb in the diagrams, to light the bulb. The interviews were conducted with seven children who showed differing degrees of understanding. No student was aware of the wire connections inside the bulb base. Many students stated whether the bulb would light or not, according to the tip of the bulb contacting the positive battery terminal and an end of wire contacting the negative battery terminal. Most of them thought that the tip of the bulb should contact the positive battery terminal, so that the bulb would light. In short, students did not use a scientific conception of electric current to predict and explain the electric circuit.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1422-1423
• /
• 2006

In our study, the PTFE nozzle ablation in the high-voltage self-blast type $SF_6$ gas circuit breaker was investigated. The test circuit breaker has the structure that the pin electrode is moving and the pressure reservoir volume and the dimension is almost same as commercial 145kv 40kA circuit breaker for similar result in real circuit breaker. The variation of current and arcing time was the range of $36kA_{rms}$(symmetry) - $40kA_{rms}$(asymmetry) and 10-16 ms. From the measured data the tendecy of the mass loss of the nozzle to current load and arc energy was estimated. In this process, the distance from the arc to nozzle(PTFE) surface, area which was exposed to arc and stroke contour was considered. These results will be used to enhance the accuracy of the computational fluid dynamics analysis in circuit breaker and estimate the residual life time of a circuit breaker.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.41-48
• /
• 2017

In this paper, we proposed a method for digital logic circuit control, through arduino device programming with digital outputs, to design a curriculum for basic digital logic circuit practices. Curricula for arduino device programming and digital logic circuit are essentially practiced in engineering departments of colleges or high schools in South Korea. However, actual practice course lacks the experimental examples of digital logic circuit combined with arduino device programming. Furthermore, actual practice course lacks the curriculum in that students design and test their own digital logic circuits with the less cost than the oscilloscope. Therefore, to solve these problems in this paper, we proposed a curriculum for basic digital logic circuit practices during one semester. In this curriculum, students control and experiment their own digital logic circuits through arduino device programming with digital outputs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.175-181
• /
• 2015

In this paper, the neuromuscular electrical stimulation medical devices for non-implantable incontinence treatment other than vaginal insertion type was developed and commercialized. The structure of medical devices for electrical stimulation based on the anatomy of the pelvic floor muscle designed. Then, the optimum parameters that may be effective in pelvic floor muscle electrical stimulation was set. The circuit system based on the optimum parameters were designed and manufactured. The frequency of the pulse voltage for electrical stimulation is 75[Hz], the pulse width is 300[${\mu}s$], the development of medical devices was to have seven program functions to the various treatments. The circuit system of medical devices was composed of microcontroller, comparator and converter. The performance of the developed circuit system in KTC(Korea Testing Certification) were carried out medical equipment inspection test. Test results, test specifications were satisfied with the medical device, the performance was verified to be commercialized as a medical device. The development of medical devices were validated risk assessment and product performance through a software validation. Commercialization of medical equipment was acquired to enable the certification standards of the international standard IEC 60601-1.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.69-76
• /
• 1998

To test all internal faults in the case that the number of Primary Input is N, we need patterns that are composed of PI's of maximum 2N. In this paper, we proposed the method to reduce a search space by dividing the multiple output circuit into subcircuit that is related with output. And this method, called PBM(Partition-Based Method), can generate a set of test pattern. The method can effectively generate a test pattern for evaluating all fault of circuit, because the length of input pattern is smaller than that of full circuit and PBM doesn't search any signal line that is not concerned with detecting fault.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.4
• /
• pp.28-31
• /
• 2005

To verify the feasibility of bifilar winding type superconducting fault current limiter (SFCL) using BSCCO tape, two types of magnets were fabricated and tested by short-circuit in this research. Even if the FCL using high Tc superconducting (HTS) tape has zero resistance in normal state, it needs to be wound as a bifilar winding for zero inductance. Solenoid type and pancake type bifilar winding magnets are designed and fabricated with the same length of BSCCO tape. The test system consists of AC power supply, transformer, fault switch, load and bifilar winding magnet. The applied AC voltages during fault duration, 0.1s, were from 0.5V to 20V. The test results without bifilar winding magnet were compared with those with each type magnets. The test results include voltage against magnet, transport current and generated resistance curve. Thermal stability, the recovery time, was studied from the results of two type magnets. The pancake type was the most effective to limit fault current but the solenoid type was thermally the most stable. From this research, short-circuit characteristics of the two types were obtained.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.603-609
• /
• 2013

In this paper, we describe the analysis of inkjet-printed silver (Ag) patterns on epoxy-coated substrates according to several reliability evaluation test method guidelines for conventional printed circuit boards (PCB). To prepare patterns for the reliability analysis, various regular test patterns were created by Ag inkjet printing on flame retardant 4 (FR4) and polyimide (PI) substrates coated with epoxy for each test method. We coated the substrates with an epoxy primer layer to control the surface energy during printing of the patterns. The contact angle of the ink to the coated epoxy primer was $69^{\circ}$, and its surface energy was 18.6 $mJ/m^2$. Also, the substrate temperature was set at $70^{\circ}C$. We were able to obtain continuous line patterns by inkjet printing with a droplet spacing of $60{\mu}m$. The reliability evaluation tests included the dielectric withstanding voltage, adhesive strength, thermal shock, pressure cooker, bending, uniformity of line-width and spacing, and high-frequency transmission loss tests.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.160-164
• /
• 1995

In order to develop a medium voltage class gas circuit breaker by our own technology, we designed and manufactured the model interrupters using the hybrid arc extinguishing principle which adopts the thermal expansion principle in the large current region and the arc rotation principle by permanent magnet in the small current region. As the results of the first year research out of three years' research period, the main design parameters such as the volume of thermal expansion chamber, the distance between fixed contact and nozzle, the length of nozzle throat, the nozzle expansion angle and the magnitude of permanent magnet etc. have been determined. 4 types of model interrupters have been designed and manufactured considering the main design parameters. The 25kA short-circuit test and capacitive current breaking test have been performed for the model interrupters and the test results analyzed to improve the model interupters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1726-1731
• /
• 2014

This paper shows the developed new lightning arrester LCM (Leakage Current Measuring device) which is important element of GIS (Gas Insulated Switchgear) Preventive & Diagnostic system and verify its performance though strengthened test standards. The existing lightning arrester LCM was modified to solve measuring errors which happened frequently. At first, we explained the principle of measuring leakage current. Through analyzing some problems which the existing LCM have. we got some improvable items. For the performance verification of the improved LCM, we manufactured prototype LCM which is applied some improvable items such as improving LCM circuit, adding protection circuit, optimizing inner structure of LCM and changing ground design. After then we carried out the performance test. Accredited testing laboratory carried out the performance verification test according to performance test criteria and procedure of reliability test standards, IEC-60225, 61000 and 60068 etc. We confirmed the test results which correspond with the performance test criteria. Also, we confirmed the performance of the improved LCM installed & being operated at G Substation through the immunity test against the normal noise and open/close surge etc.