• Korean Management Science Review
• /
• 제17권1호
• /
• pp.117-134
• /
• 2000

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Journal of Distribution Science
• /
• 제21권7호
• /
• pp.21-31
• /
• 2023

Purpose: The purpose of this study is to investigate how to perceive the role of the slow city and provide policy and managerial implications on the necessity of the slow city management and distributional values based on perspectives of millennials and generation Z. This study examined i) how do millennials and generation Z perceive economic, environment, cultural, community, and quality of life factors on attitude toward the slow city? ii) how does attitude affect overall satisfaction and intention to recommend the slow city to other cities' residents? iii) how do millennials perspectives on proposed factors differ from generation Z? Research design, data and methodology: This study conducted an online survey and applied t-test, factor, ANOVA, and regression analysis. Results: This study found that effects of economic and quality of life factors on attitude toward the slow city showed significance in cases of millennials and generation Z, while effects of environment factor on overall attitude showed significance in the case of generation Z. Conclusions: Governments should foster how millennials and generation Z understand the meanings of the slow city to form a better attitude in a society and put efforts to build a better image and management of the slow city.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.145-146
• /
• 2005

This study performs a simulation for an accumulation mechanism of contaminants, which were produced in an industrial belt of inland, on the surface of insulators. From the simulation, silicon insulators presented higher accumulation than that of EPDM(Ethylene Propylene Diene Terpolymer : EPDM) insulators on the same distance in the case of the Virgin polymer insulator, and this result presented the same result in the insulator applied in actual fields. In the case of the accumulation test for the Virgin insulator and insulators used in actual fields, it is evident that the Virgin insulator presented more accumulation than that of the insulator used in actual fields. The results can be caused by the generation of LMW (Low Molecular Weight) on the external material of polymer insulators, and the level of the accumulation can be changed according to the degree of the continuous generation of LMW.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제29권1호
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.

• The KIPS Transactions:PartD
• /
• 제15D권1호
• /
• pp.107-112
• /
• 2008

The maintenance of legacy software systems is very important in the field of a software engineering. In the maintenance, a regression test confirms the behavior preserving of the software which has been changed but most of regression tests are done in a system level and rarely done in a unit test level because there is no test case. This paper proposes how to modify legacy software systems and make unit test cases as an asset. It uses a technique with a specific module of a real software development project and analyzes test coverage results. After this, if a study about automatic restructuring techniques and a test case generation proceeds continuously, we can expect the big advance of legacy software systems maintenance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제60권5호
• /
• pp.936-941
• /
• 2011

Generation cooperations have focused on active power directly related to economic value. So, utility cooperation have taken expense to stabilize power system, although generator has responded quickly with variation of power system voltage and is controlled at real time. As a reactive power source, it is necessary for generator's capabilities to be verified. But domestic generators scarcely have been tested and operated to reactive power capability. In case of power system fault, operators would not quickly take a follow-up actions about reactive power disturbance. Therefore generator reactive power capability verification strategy must be developed, several generators is tested as examples since 2004. This paper is extracted from the test results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제64권3호
• /
• pp.138-142
• /
• 2015

Most of the existing studies on functional safety testing for the railway signaling system software have focused on verifying the functional safety through the monitoring of internal memory embedded railway signaling system. However, the railway signaling system is one of the typical embedded control system in the railway sector, and the embedded software has a characteristic of generating an appropriate outputs through the combination of internal processing in consideration of the current internal status and external input. Therefore, the test approach of using the interface communication channel can be effective way for the functional testing for railway signaling system software in consideration of these characteristic. Since a communication interface specification of the railway signal system has a the properties of the sequence input and output signals, test-case for software testing is the most effective methodology by MSC (Message Sequence Chart) language, one of the graphic language. The MSC-based test-case generating methodology for signaling system software was proposed in this paper.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제25권6호
• /
• pp.542-550
• /
• 2015

Usually, a new SSD (Solide State Drive) product is developed based on the software platform of the previous product. Therefore, when using the same test case was used to evaluate the previous generation evaluation of new products are a number of advantages may be, but a priority or weight is the inefficiency exists in the use of the evaluation resources due to not considered. A new method is proposed to prevent the waste of testing resources. Through the analysis of the evaluation data for the previous products, the combinations of testing cases with the highest probability for defect detections are identified. When the software is to be reused, most part of the base software platform is rarely modified and only some modules are added or modified. So, the whole software system may have similar types of defects with the previous products. By utilizing the evaluation data for the previous proucts, we can detect defects at an early stage.

• Journal of the Korean Home Economics Association
• /
• 제35권3호
• /
• pp.63-75
• /
• 1997

The purposes of this study was to identify the differences between fashion opinion leaders and followers in the characteristics oriented New Young Generation and the types of fashion advertising involvement. The data were collected via a questionnaire from 431 college students(female=218 male=213) living in Seoul, Korea and analyzed by factor analysis and t-test. The results of this study were as follows: First, eight factors of the characteristics oriented New Young Generation were identified: Fashion, individuality, preference of caffe with affective mood, expression of emotion, indivisualism, preference of tastes oriented Western Europe, activity of pan club and chatting by personal computer. The significant differences between fashion opinion leaders and followers in fashion, individuality, preferences of the caffe with affetive mood, and expression of emotion were found in the data collected from female. There were significant differences between fashion opinion leaders and followers in fashion, individuality in the data collected from male. Second, three factors of fashion involvement advertising were identified: The hedonic involvement, social involvement, utilitarian involvement. The significant differences between fashion opinion leaders and followers in the hedonic involvement, social involvement, utilitarian involvement and the levels of involvement were found in the case of female's data. There were significant differences between fashion opinion leaders and followers in the hedonic involvement, social involvement and levels of involvement except for utilitarian involvement in the case of male's data.