• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.135-143
• /
• 2016

In this study, an embedded system composed of equipment setting, block importing, scenario setting and output reporting is developed in multi-body dynamics program, ADAMS, for conducting dynamic structural analysis of block lifting process. First, equipment used for block lifting process is set in the simulation environment and the shapes and functions of two lifting beams, and six block loaders are provided as the equipment. Second, the modal analysis result of the lifting block is imported from the static structural analysis system, NASTRAN. Third, the lifting scenarios, such as hoisting, waiting, trolley moving, and wire connecting, are set in the system. Finally, output results in the forms of plots, texts and tables, are reported after the dynamic structural analysis. The test examples conducted in a shipyard are applied into the developed system in various condition and scenarios. The loads at the lug points, the stress contours, and the hot spot tables of the developed system are compared with the result of the static analysis system.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.45-51
• /
• 2018

Autonomous ship has been sportlighted as a core technology for the maritime industry in Industry 4.0 era. Autonomous ship is expeected to improve the safety, reliability, efficiency and environment significantly. For the realization of the autonomous ship, the remote control of the ship is one of the core functionality in addition to the autonomous ship control functionality in a ship. In this paper, we address a autonomous ship control system based on remote control. This paper proposes a remote control autonomous system and standardized ship-to-shore remote control protocol with for open platform. Finally, we implemented the system and tested with a real experiments with the test ship in order to demonstrate the feasibility of the proposed remote control autonomous system.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.299-306
• /
• 2019

In general, repair mortar is used to rehabilitate underground communities, but difficulties are encountered in the execution of long-term construction due to spatial co-operatives. In this study, the engineering properties of repair mortar according to the curing condition and accelerator type were reviewed. The results showed that the aluminate, alkali-free and calcium-aluminate precipitates in the water curing conditions showed higher compressive strength at the beginning of age than mortar specimens under air curing conditions, and increased. Especially in CA and AF test specimen with cement mineral quick setting, a large amount of ettringite products were observed compared with AL, thus reducing the pore volume and increasing the strength of the compound by micro-filling effect were found.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.177-184
• /
• 2021

This paper proposes an assessment method using probability-based index for safe and successful underwater docking of autonomous underwater vehicles(AUVs) to the docking stations(DSs). The proposed method assesses the probability of docking according to the degree to which the state of the AUV is consistent with the state criteria for docking. The assessment is performed within a specific area considering the kinematic constraints and docking plans of the AUV. The assessment process is defining probability density function, calculating probabilities for reaching the docking station according to the difference to position and heading criteria, and computing the probability-based index in real-time. We verify the validity of the proposed method through analyzing the data acquired on operation test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.849-856
• /
• 2020

Recently, as the number of high-height vehicles such as double-decker buses has increased, collision accidents have occurred in bridges and tunnels due to the deviation from the designated routes and driver's carelessness. In the case of the existing front collision warning system, it is limited to vehicles and pedestrians, so it is difficult to use it as a pass height warning system for the high height vehicles. In this paper, we propose a system that generates a warning by determining the correlation and time series characteristics of data for each segment using multiple lidar sensors and then determining the possibility of collision in the upper part of the vehicle. Also, the proposed system confirmed the proper operation through a real-time driving test and a system performance evaluation by the Korea Automobile Testing & Research Institute.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2022

BIM facilitates data transparency and consistency through three-dimensional parametric modeling and promotes the accurate managing and sharing of project information. In Korea, however, BIM-based detailed design of architectural interior finishes required during the Construction Documents phase increases the burden on architectural firms due to frequent design changes and manual workload. Therefore, the purpose of this study was to establish rule-based modules using parametric modeling that automates repetitive tasks that occur during the detailed design of interior finishing. Interviews with practitioners were conducted to analyze the major finishing elements. Of these floors, walls, and ceilings, which were the most rudimentary and common items, were selected as the subjects of the study. The modules developed in this study have two functions. One is to create new finish types, and the other is the automatic modeling of new types into rooms. For these functions, parameters that belonged to each finish and room element in a BIM model were analyzed and valid parameters directly used for parametric modeling were derived. Then, based on these parameters, rule-based modules for three elements, I.e., floors, walls, and ceilings were constructed with Revit Dynamo, and the effectiveness of the modules was verified with a pilot test. In conclusion, this study suggested a series of processes for automatic finishing to improve the efficiency of BIM-based architectural detailed design of finishes and to contribute in solving the chronic problems occuring during current design processes.

• Journal of Aerospace System Engineering
• /
• v.16 no.2
• /
• pp.13-24
• /
• 2022

As the scale of airborne system software increases, the use of OOT (Object-Oriented Technology) is increasing for functional expansion, efficient development, and code reuse, but the verification method for airborne object-oriented software is conducted from the perspective of the existing procedure-oriented program. The purpose of this paper was to analyze the characteristics of OOT and the vulnerabilities derived from the functional characteristics of OOT, and present a verification method applicable to each software development process (Design, Coding and Testing) to ensure the functional safety integrity of aviation software to which OOT is applied. Additionally, we analyzed the meaning of the static analysis results among the step-by-step verification measures proposed by applying LDRA, a static analysis automation tool, to PX4, an open source used to implement flight control software.

• Journal of Creative Information Culture
• /
• v.7 no.4
• /
• pp.207-215
• /
• 2021

As computational thinking has been noted as an important competency worldwide, SW education was introduced in the 2015 revised curriculum, and SW education has been applied to the curriculum from 2018. However, in a poor educational environment, the educationally underprivileged class is in the blind spot of SW education and is not receiving systematic SW education. Therefore, this study analyzed the effect of conducting a non-face-to-face SW online education program for 267 underprivileged elementary school students in education at a time when non-face-to-face online education was being conducted through the COVID-19 mass infectious disease. As a result of conducting the computational thinking ability test, which abstraction, problem decomposition, algorithm, automation, and data processing, before and after education, the overall score of computational thinking and the score of all five factors were statistically significantly increased(p<0.001). Among the five factors, there was the highest score improvement in data processing score. These results suggest that the non-face-to-face SW online education program is effective in improving the computational thinking ability of elementary school students from the educational underprivileged class.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2022

We propose a novel network architecture and build dataset for recognizing clickable objects on mobile device screens. The data was collected based on clickable objects on the mobile device screen that have numerous resolution, and a total of 24,937 annotation data were subdivided into seven categories: text, edit text, image, button, region, status bar, and navigation bar. We use the Deconvolution Single Shot Detector as a baseline, the backbone network with Squeeze-and-Excitation blocks, the Single Shot Detector layer structure to derive inference results and the Feature pyramid networks structure. Also we efficiently extract features by changing the input resolution of the existing 1:1 ratio of the network to a 1:2 ratio similar to the mobile device screen. As a result of experimenting with the dataset we have built, the mean average precision was improved by up to 101% compared to baseline.

• Journal of Korean Academy of Nursing
• /
• v.52 no.5
• /
• pp.535-549
• /
• 2022

Purpose: The study aimed to design and develop an automated personalized self-care (APSC) program for patients with type 2 diabetes mellitus. The secondary aim was to present a clinical protocol as a mixed-method research to test the program effects. Methods: The APSC program was developed in the order of analysis, design, implementation, and evaluation according to the software development life cycle, and was guided by the self-regulatory theory. The content validity, heuristics, and usability of the program were verified by experts and patients with type 2 diabetes mellitus. Results: The APSC program was developed based on goal setting, education, monitoring, and feedback components corresponding to the phases of forethought, performance/volitional control, and self-reflection of self-regulatory theory. Using the mobile application, the participants are able to learn from educational materials, monitor their health behaviors, receive weekly-automated personalized goals and feedback messages, and use an automated conversation system to solve the problems related to self-care. The ongoing two-year study utilizes a mixed method design, with 180 patients having type 2 diabetes mellitus randomized to receive either the intervention or usual care. The participants will be reviewed for self-care self-efficacy, health behaviors, and health outcomes at 6, 12, 18, and 24 months. Participants in the intervention group will be interviewed about their experiences. Conclusion: The APSC program can serve as an effective tool for facilitating diabetes health behaviors by improving patients' self-care self-efficacy and self-regulation for self-care. However, the clinical effectiveness of this program requires further investigation.